Electrical Engineer jobs

Electrical Engineer - Robotics & Autonomous Systems Associate

Fathom RoboticsFort Worth, TXFull-timeOn-siteSECRET clearance required

Pay not listed

Looks real. 2 things to check before you apply.

On Fathom Robotics’ own careers site (Workable), checked open today.

  • To check: Posted by the employer 3 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteWorkable board
  • Checked: Checked open todayWorkable board
  • Checked: No reposts foundWorkable board
  • Trust score 85 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Define electrical subsystem architecture, select components, and create bills of materials for AUV and USV programs.
  • Capture schematics and lay out PCBs, connectors, harnesses, and cable assemblies for marine environments.
  • Bring up, test, debug, and iterate on hardware, including support for hardware-in-the-loop testing.
  • Participate in field deployments to validate designs and troubleshoot issues under operating conditions.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Demonstrated hands-on PCB layout experience, including schematic capture and board layout
  • Some subsystem-level electrical design experience, such as power architecture or sensor interfacing
  • Hands-on electronics experience, including soldering, wiring, and bench troubleshooting
  • Power electronics or battery management system design experience (preferred)
  • EMI/EMC design and mitigation experience (preferred)
  • Design experience with waterproof or marine-rated connectors and enclosures (preferred)
  • ArduPilot, ArduSub, or MAVLink experience on any vehicle type (preferred)
  • IMU or GNSS sensor integration experience (preferred)

Education

  • Degree, or equivalent hands-on experience, in Electrical Engineering or a related field

Skills

  • Solid grounding in circuit design fundamentals: power electronics, signal integrity, and component selection
  • Familiarity with microcontroller platforms such as Arduino, STM32, or Teensy, and flight controller hardware such as Pixhawk
  • Familiarity with Embedded C/C++ or Python
  • CAD proficiency (SolidWorks or equivalent) (preferred)

On the job

  • Able and willing to travel to field events, including outdoors and on boats

Other requirements

  • US person status
  • Must be able to pass a background check and be eligible to obtain a SECRET clearance

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Flexible ICHRA; eligible employees receive up to $750 per month toward an individual health plan selected through an online marketplace. Unused funds can go toward other eligible medical expenses.
Retirement plan
401(k) plan.

Full job description

From Fathom Robotics’ careers site

About Fathom Robotics:

Fathom Robotics provides operations, maintenance, training, and applied engineering services for uncrewed maritime systems supporting U.S. Government and commercial defense programs. We have multiple active projects across a variety of government and commercial clients and are actively fielding systems in operational environments.

Role Overview:

Show full descriptionShow less

Fathom Robotics is hiring an Electrical Engineer to own electrical subsystem design and PCB layout for our AUV and USV programs, full-time and in-person at our Fort Worth, TX facility. You will define subsystem architecture such as power distribution topology and sensor interfacing, turn it into a validated board, then carry that design through bring-up and field validation alongside the team that builds and fields it. Boards you design get built, tested, and put in the water within weeks, not years.

Location: Fort Worth, TX (in-person, on-site at our facility, with periodic field deployments)

Work Type: Full-Time, in-person

Program Conditions:

This is an in-person, on-site position at our Fort Worth, TX facility, with periodic field deployments to test and validate designs on the water. Field events involve boat operations and outdoor environments. Standard full-time schedule, with additional availability expected around design reviews and test milestones.

Responsibilities:

  • Subsystem design: define electrical architecture, including power distribution topology, sensor and communications interface strategy (ArduSub, ArduPilot, MAVLink), and connector and harness planning for marine environments
  • Subsystem design: select components and build bills of materials, balancing performance, cost, and availability
  • PCB layout: own schematic capture and board layout, translating subsystem architecture into a manufacturable design
  • PCB layout: design connector, harness, and cable assemblies for marine and field environments
  • Bring up and validate new hardware on the bench, including electrical test, debugging, and design iteration
  • Support hardware-in-the-loop testing with real sensors and flight/vehicle controllers
  • Support field deployments to validate designs under real operating conditions and troubleshoot issues in the field
  • Maintain design documentation, including schematics, BOMs, and test reports

Requirements

Required Qualifications:

  • Demonstrated hands-on PCB layout experience, including schematic capture and board layout in tools such as Altium, KiCad, or Eagle; the top-priority qualification for this role
  • Some subsystem-level electrical design experience, such as power architecture or sensor interfacing
  • Degree, or equivalent hands-on experience, in Electrical Engineering or a related field
  • Solid grounding in circuit design fundamentals: power electronics, signal integrity, and component selection
  • Hands-on electronics experience, including soldering, wiring, and bench troubleshooting
  • Familiarity with microcontroller platforms such as Arduino, STM32, or Teensy, and flight controller hardware such as Pixhawk
  • Familiarity with Embedded C/C++ or Python
  • Comfortable in a lab or shop environment through prototype build and test, and able and willing to travel to field events, including outdoors and on boats
  • Resourceful and proactive, able to problem-solve independently in a small company environment
  • US person status required (defense program context)
  • Must be able to pass a background check and be eligible to obtain a SECRET clearance

Preferred Qualifications:

  • Power electronics or battery management system design experience
  • EMI/EMC design and mitigation experience
  • Design experience with waterproof or marine-rated connectors and enclosures
  • ArduPilot, ArduSub, or MAVLink experience, on any vehicle type
  • IMU or GNSS sensor integration experience
  • CAD proficiency (SolidWorks or equivalent) to coordinate with mechanical packaging

Benefits

We offer a flexible ICHRA (Individual Coverage Health Reimbursement Arrangement), so you choose the health plan that fits you instead of a one-size-fits-all option. Eligible employees receive up to $750 per month toward an individual plan, selected through a simple online marketplace, and any unused funds can go toward other eligible medical expenses. We also offer a 401(k) plan to help you save for the future.

Compensation: Competitive salary, commensurate with experience.

Fathom Robotics is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Electrical Engineer

ALTEN Technology USA · North Reading, MA +1 place

$120k–$170k/yr

StrongChecked open todayPosted 15 days ago

Electrical Engineer III/IV

Zone 5 Technologies · Fort Walton Beach, FL +2 places

$131k–$161k/yr

StrongChecked open todayPosted 1 month ago

Electrical Engineer I/II

Zone 5 Technologies · Fort Walton Beach, FL +2 places

$93k–$112k/yr

StrongChecked open todayPosted 1 month ago

See more like this