QA & Test Engineer jobs

Firmware Engineer - Testing

1XSan Carlos, CAFull-timeOn-sitePosted 22 days ago

$150k–$190k/yr listed by the employer

About the typical $163k a year for QA & Test Engineer jobs in California (all levels)How we compare

How we compare. Typical is the median yearly pay of 209 QA & Test Engineer jobs in California (all levels) that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
2+ years
Degree
Bachelor's degree or equivalent

Looks real and checked open today.

On 1X’s own careers site (Ashby).

Trust score after our next daily check

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Note: Too new for a trust scoreScored after our next daily check
See all 5 checksShow fewer
How we check

What you’ll do

  • Define firmware release test criteria, run qualification testing and sign off on releases before deployment.
  • Work with firmware developers to set test strategies, close coverage gaps and provide feedback before code merges.
  • Build HIL test rigs with fault injection and validate communication buses.
  • Create automated Python regression suites for CI and turn field and fleet issues into regression tests.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 2+ years of firmware or embedded systems testing
  • Ability to test embedded systems at the hardware-software boundary, including timing and fault conditions
  • Experience building test automation in Python and Bash, using Git and CI systems
  • Experience with communication protocols such as CAN, UART, I2C and SPI
  • Hands-on experience with oscilloscopes, logic analyzers, power supplies, electronic loads and bus analyzers
  • Experience building HIL test systems and automation frameworks such as pytest or Robot Framework, including dynamometers, environmental chambers or fault-injection hardware (preferred)
  • Experience testing motor control or power electronics firmware, including BLDC/PMSM drives, battery management systems or power distribution (preferred)
  • Experience with EtherCAT or CAN FD at 1 kHz and above (preferred)
  • Familiarity with IEC 61508, ISO 13849 or ISO 26262, including requirements traceability and verification (preferred)
  • Experience in embedded security testing, including secure boot, code signing, hardware security modules or TPMs, fuzzing, penetration testing or fault-injection attacks (preferred)
  • Familiarity with IEC 62443 or ISO/SAE 21434 (preferred)
  • Robotics, automotive or IoT device background (preferred)

Education

  • Bachelor's degree in electrical engineering, computer engineering, computer science or a related field, or equivalent experience

Skills

  • Ability to read embedded C/C++ to design targeted tests
  • Familiarity with FreeRTOS, SafeRTOS or Zephyr (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Comprehensive medical coverage; FSA and HSA options
Dental & vision
Comprehensive dental and vision coverage
Retirement plan
401(k) plan with company match: 100% on the first 3% of contributions and 50% on the next 2%
Paid time off
Generous paid time off and company holidays
Wellness & mental health
Employee Assistance Program for mental health, financial and personal support
Life & disability insurance
Short-term and long-term disability and life insurance
Commuter benefits
Transit and parking benefits
Meals
Onsite snacks and catered lunches

Also: parental leave, equity

Full job description

From 1X’s careers site

ABOUT 1X

We're building humanoid robots that work in home - doing the chores, handling the tasks, and giving people their time back. Simple, but it's not.

To do this right, we have to solve robotics, AI, manufacturing - at the same time, at scale, in a form factor that has to be safe enough to live with your family. If you're inspired by this, you'll thrive here. We've been at this since 2014 and we're at the point where the hard problems are behind us and the hard work is in front of us.

NEO is our flagship - a home robot designed to move, learn, and operate in the real world alongside real people. We're not demoing it - we're shipping it. We're excited to meet you, if this excites you.

Show full descriptionShow less

If you've spent your career working on problems that matter and want to see them actually reach the world - this is that moment. We're scaling, we're hiring with intention, and we need people who want to build something that will genuinely change how humans spend their time - safely creating abundance for all.

ABOUT THE TEAM

The Firmware team owns the embedded software on every hardware subsystem in NEO: communication architecture, power management and motor control. That firmware is what lets NEO move safely, take on new hardware quickly and scale across many embedded nodes, and it gates our biggest product milestones on the way to production.

YOUR CHARTER

The mission of this role is to make every firmware release safe to put on robots in people's homes, while keeping firmware developers shipping fast. You own firmware quality across NEO and are the testing partner for every firmware developer on the team. You decide whether a release is ready to go out, and you build the rigs, automation and test plans that tell the team quickly when something is broken.

KEY OUTCOMES

  • Own firmware release quality: define release test criteria, run release qualification and sign off on every firmware release before it reaches the fleet
  • Partner with every firmware developer early in feature work to define test strategy, close coverage gaps and get feedback into their hands before code merges, so the team ships faster without breaking the robot
  • Build hardware-in-the-loop (HIL) test rigs, from single boards to full actuator and robot setups, with fault injection for power, communication and sensor failures and validation of real-time buses (EtherCAT, CAN/CAN FD, SPI, UART, I2C)
  • Deliver automated Python regression suites that run in CI on every firmware change with clear pass/fail results, and turn field and fleet issues into new regression tests
  • Prove that safety-critical and security behavior works as specified, including fault detection, current and thermal limits, safe torque-off, secure boot and firmware signing, under edge cases and malformed inputs
  • Drive fleet robustness by confirming every node recovers to a known safe state without manual intervention after failed or interrupted updates, power loss during flashing, corrupted images and watchdog resets, backed by long-duration soak and stress testing

KEY COMPETENCIES

  • You treat developer velocity as your own goal. You find out what each firmware engineer needs to test their work and get it to them before they have to ask
  • You do whatever the job calls for: manual bench testing, writing automation, building a custom fixture or modifying hardware to reach a hard-to-test condition
  • You break complex embedded systems into testable requirements and find the failure modes others miss, especially in fault handling and safety behavior, which you prove rather than assume
  • You can work out whether a bug lives in firmware, hardware or the test setup, using a scope, logic analyzer and bus analyzer
  • You script anything you run twice, write clear bug reports and push back on unclear requirements, working closely with firmware, electrical, actuator and operations engineers

MINIMUM REQUIREMENTS

  • Bachelor's degree in electrical engineering, computer engineering, computer science or a related field, or equivalent experience, with 2+ years of firmware or embedded systems testing
  • Demonstrated ability to test embedded systems at the hardware-software boundary, including timing and fault conditions, and to read embedded C/C++ to design targeted tests
  • Proven track record of building test automation in Python and Bash, using Git and CI systems such as GitHub Actions, Jenkins or Buildkite
  • Experience with communication protocols such as CAN, UART, I2C and SPI
  • Experience with lab equipment, hands-on: oscilloscopes, logic analyzers, power supplies, electronic loads and bus analyzers

PREFERRED SKILLS

  • Experience in building HIL test systems and automation frameworks (e.g. pytest, Robot Framework), including dynamometers, environmental chambers or fault-injection hardware
  • Experience in testing motor control or power electronics firmware (BLDC/PMSM drives, battery management systems, power distribution) and EtherCAT or CAN FD at 1 kHz and above
  • Familiarity with safety-critical standards such as IEC 61508, ISO 13849 or ISO 26262, including requirements traceability and verification
  • Experience in embedded security testing: secure boot, code signing, hardware security modules or TPMs, fuzzing, penetration testing or fault-injection attacks, and standards such as IEC 62443 or ISO/SAE 21434
  • Familiarity with real-time operating systems such as FreeRTOS, SafeRTOS or Zephyr, and a robotics, automotive or IoT device background

WHAT DOES A SUCCESSFUL 1X TEAM MEMBER LOOK LIKE

Team members at 1X who thrive here are builders. They move fast, own their work completely, and treat time like it's the one thing you can't get back - because it is. They say what they mean, finish what they start, and hold themselves to a standard before anyone has to ask. We push each other to be better, and we do it with honesty and respect.

COMPENSATION RANGE

$150,000 - $190,000 + Equity

BENEFITS

  • Comprehensive medical, dental, and vision coverage
  • Generous paid time off, company holidays, and parental leave
  • 401(k) plan with company match (100% on the first 3% of contributions, 50% on the next 2%)
  • Flexible Spending Accounts (FSA) and Health Savings Accounts (HSA) options
  • Commuter benefits (transit and parking)
  • Short-term and long-term disability, and life insurance
  • Employee Assistance Program (EAP) for mental health, financial, and personal support
  • Onsite snacks and catered lunches

EQUAL OPPORTUNITY EMPLOYER

1X is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, citizenship, age, marital status, medical condition, genetic information, disability, military or veteran status, justice system impact, or any other characteristic protected under applicable federal, state, or local law.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Firmware Test Engineer

Echo Neurotechnologies · San Francisco, CA

$170k–$200k/yr

StrongChecked open todayPosted 1 month ago

Test Engineer

Foxconn Industrial Internet - FII · San Jose, CA

$85k–$110k/yrFull-timeOn-site

StrongChecked open todayPosted 20 days ago

Staff QA Engineer

Tatari · Los Angeles, CA +2 places

$170k–$200k/yrHybrid

StrongChecked open todayPosted 1 month ago

See more like this