Mechanical Engineer jobs

Senior Mechanical Engineer

Standard BotsBoston, MAFull-timeOn-sitePosted 23 days ago

$150k–$195k/yr listed by the employer

Above the typical $150k a year for senior Mechanical Engineer jobs in MassachusettsHow we compare

How we compare. Typical is the median yearly pay of 33 senior Mechanical Engineer jobs in Massachusetts that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
5+ years
Degree
Bachelor's degree

Looks real and checked open today.

On Standard Bots’ own careers site (Ashby).

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Own mechanical subsystems for the Bolt mobile manipulation platform from requirements and concept through design, analysis, and production release.
  • Run architecture trade studies covering structure, materials, stiffness, fatigue, thermal and ingress protection, serviceability, and cost; coordinate decisions with electrical, software, and safety teams.
  • Design parts and assemblies, perform calculations and FEA, create drawings and tolerance stackups, and build and test prototypes.
  • Define and run subsystem tests, including load, vibration, drop, thermal, and ingress tests, and use results to improve designs.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years designing, building, and testing electromechanical products
  • Experience taking electromechanical designs through production release
  • Experience shipping electromechanical hardware for real-world use
  • DFM experience with sheet metal, castings, machining, weldments, and injection molding
  • Experience with a PDM/PLM release process
  • AMR/AGV, vehicle, or drivetrain design experience (preferred)
  • Suspension and wheel module design, caster and tire selection, or stability analysis (preferred)
  • Thermal management of power electronics and compute, cable and harness routing, or EMC-aware mechanical design (preferred)
  • Battery pack packaging and thermal management experience (preferred)
  • Exposure to safety certification standards ISO 3691-4, ANSI/RIA R15.08, or ISO 13849 (preferred)

Education

  • Bachelor’s or graduate degree in Mechanical Engineering or a related field

Skills

  • Strong knowledge of structures and mechanisms, including load paths, stiffness and fatigue, bearings and drivetrain components, fasteners and joints, and tolerance analysis
  • Ability to perform hand calculations and use FEA to size parts
  • Proficiency in SolidWorks for parts, large assemblies, drawings, and simulation
  • Ability to produce clear design documentation, trade studies, and design reviews

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance
Dental & vision
Dental and vision insurance
Retirement plan
401(k)
Equity
Employee stock options for all full-time employees
Life & disability insurance
Life and disability insurance

Also: paid time off

Full job description

From Standard Bots’ careers site

ABOUT STANDARD BOTS

At Standard Bots, we're revolutionizing real-world automation by making robotic systems accessible to everyone. Our AI-powered platform enables robots to tackle unprecedented challenges through an intuitive instruction interface, bringing the power of software automation to physical spaces.

WHAT YOU'LL DO

Show full descriptionShow less

We're building Bolt, a mobile manipulation platform: an autonomous mobile base carrying our robot arms. We're hiring two Senior Mechanical Engineers to own major subsystems of that platform. These include: the chassis, drivetrain and suspension, wheel modules, battery mounting, the control box, compute, and safety hardware, with its thermal management, cabling, and service access. You'll take your subsystem from concept through prototype builds, test, and production release, and work hands-on in the shop and lab.

📍 LOCATION

This is an on-site role based at our new Boston-area office, where Bolt is designed, built, and tested, with some flexibility on days in the office once you're up to speed. On-site you'll have a build area, electronics lab, test floor, and production robots steps from your desk.

RESPONSIBILITIES

  • Own the design of Bolt subsystems from requirements through production release: concept, detailed design, analysis, drawings, and release
  • Run the trade studies that set your subsystem's architecture — structure and material choices, stiffness and fatigue targets, thermal and IP strategy, serviceability, cost — and close them with EE, software, and safety
  • Do the hands-on work: SolidWorks design, hand calcs and FEA, tolerance stackups, DFM for sheet metal, castings, machined parts, weldments, and plastics; build and test your own prototypes
  • Define and run subsystem tests (static and dynamic loads, vibration, drop, thermal, ingress) and feed results back into the design
  • Be the technical contact for your subsystem's fabricators; drive DFM/DFA feedback and support production issues
  • Lead design reviews for your subsystem and mentor junior engineers

WHO YOU ARE

You've shipped electromechanical hardware that lives in the real world — a mobile robot, vehicle, industrial machine, or similar — and you know the difference between a design that passes FEA and one that survives a year on a warehouse floor. You like owning a subsystem end to end and being judged on the hardware. Our ideal candidate expects to spend roughly 60% of their time on design and analysis and 40% on builds, test, and manufacturing support.

SKILLS YOU'LL BRING

  • Experience: Bachelor's or graduate degree in Mechanical Engineering (or related) and 5+ years designing, building, and testing electromechanical products, including designs you've taken through production release
  • Mechanical Depth: Strong in structures and mechanisms — load paths, stiffness and fatigue, bearings and drivetrain components, fasteners and joints, tolerance analysis
  • Manufacturing: DFM for sheet metal, castings, machining, weldments, and injection molding; you know what each process costs and where it fails
  • Analysis: Hand calcs first, FEA when it earns its keep; you can size a part and defend the numbers
  • Tool Fluency: Proficient in SolidWorks (parts, large assemblies, drawings, simulation) and a PDM/PLM release process
  • Clarity of Communication: Clear design documentation, crisp trade studies, and design reviews that make your peers better
  • Impact Driven: A reliable, manufacturable part that ships beats an elegant one that never leaves the lab
  • Excelling in Ambitious Environments: You thrive in a fast-moving team with changing requirements and tight timelines

BONUS POINTS FOR

  • Chassis focus: AMR/AGV, vehicle, or drivetrain design; suspension and wheel module design; caster and tire selection; stability analysis
  • Control box focus: thermal management of power electronics and compute, cable and harness routing, EMC-aware mechanical design
  • Battery pack packaging and thermal management
  • Safety certification exposure (ISO 3691-4, ANSI/RIA R15.08, ISO 13849)

COMPENSATION AND BENEFITS

The base salary range for this role is $150,000 to $195,000, depending on experience. Base salary is just one part of the overall compensation at Standard Bots. All Full-Time Employees are eligible for Employee Stock Options. We also offer a package of benefits including paid time off, medical/dental/vision insurance, life insurance, disability insurance, and 401(k) to regular full-time employees.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Senior Mechanical Engineer

Boston Engineering Corporation · Waltham, MA

$120k–$145k/yrFull-timeOn-site

StrongChecked open todayPosted 24 days ago

Mechanical Engineer

Merlin Labs · Boston, MA

$115k–$150k/yrFull-timeOn-site

StrongChecked open todayPosted 1 month ago

See more like this