Mechanical Engineer jobs

Test Engineer, Actuation

Mind RoboticsPalo Alto, CAFull-timeOn-site

Pay not listed

Key facts

Experience
3+ years
Degree
Bachelor's degree or equivalent

Looks real. 2 things to check before you apply.

On Mind Robotics’ own careers site (Ashby), checked open today.

  • To check: No pay range listed, though one is likely required in CAAsk for the pay range before you interview. The law here likely requires one.
  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: No reposts foundAshby board
  • Trust score 85 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Design and build dynamometer systems, test fixtures, and stands for actuator, gearbox, and driveline validation.
  • Integrate motors, encoders, torque sensors, and other components onto test rigs, and run tests to characterize actuator performance.
  • Generate and visualize test data to inform actuator selection and sizing, and build repeatable procedures and scalable data pipelines.
  • Track variation, drift, and wear across units; inspect components after testing and document findings.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3+ years of hands-on experience testing and characterizing real electromechanical or robotic hardware
  • Ability to design and build test hardware such as fixtures, stands, and drivelines from concept through fabrication
  • Experience with dynamometer setups or equivalent custom test rigs, from concept through fabrication
  • Experience with planetary, harmonic/strain-wave, and cycloidal actuators and familiarity with their tradeoffs (preferred)
  • Experience scaling test or calibration pipelines across a large fleet of test systems (preferred)
  • Manufacturing process familiarity and first-article inspection experience (preferred)

Education

  • Bachelor's or Master's degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field, or equivalent hands-on experience

Skills

  • Proficiency with 3D CAD and ability to generate 2D drawings with GD&T per ASME Y14.5
  • Solid grasp of actuator fundamentals: motors, gear transmissions, encoders, torque/force sensors, and thermal behavior
  • Ability to write and maintain clean test documentation and procedures
  • Experience with CATIA V6 (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Mind Robotics’ careers site

About Mind

Mind Robotics is building Physical AI for real-world industrial deployment, starting with the factory floor. We believe the hardest problems in AI are solved when researchers and engineers are hands-on with the physical world every day - and we're looking for people who are passionate about robotics, value ownership, and are excited to tackle difficult problems. Join us if you want to move beyond digital intelligence and put intelligence into motion.

About the Role

Show full descriptionShow less

As an Actuator Test Engineer on our team, you will build the dynamometer test infrastructure to verify how every actuator we put on the robot actually performs. You will move fluidly between designing test fixtures, building test stands, and running the characterization tests that drive our actuator selection and sizing decisions.

Responsibilities

  • Design and build the dynamometer test systems, including mechanical driveline, load application, and sensor integration (torque, position, thermal).
  • Design and fabricate test fixtures and stands for actuator, gearbox, and driveline validation, producing accurate 2D drawings with GD&T (ASME Y14.5) for tight tolerances and proper fits.
  • Run tests on actuators to characterize torque, speed, efficiency, thermal performance, stiffness, friction, bandwidth, life-cycle, backlash, and torque sensor accuracy.
  • Support electromechanical integration of motors, encoders, torque sensors, and other components onto test rigs.
  • Generate and visualize the data that drives actuator selection and sizing decisions
  • Build repeatable test procedures and data pipelines that scale from a single actuator on a bench to characterizing units across the fleet.
  • Quantify unit-to-unit variation, track drift and wear over time, and flag outlier units.
  • Perform post-test teardown inspections (gear wear, bearing wear, lubrication condition, wiring/sensor integrity) and document findings rigorously.

Qualifications

  • 3+ years of hands-on experience testing and characterizing real electromechanical or robotic hardware.
  • Demonstrated ability to design and build test hardware such as fixtures, stands, and drivelines from concept through fabrication.
  • Proficiency with 3D CAD and the ability to generate 2D drawings with GD&T per ASME Y14.5.
  • Solid grasp of actuator fundamentals: motors, gear transmissions (planetary, harmonic/strain-wave, cycloidal), encoders, torque/force sensors, and thermal behavior.
  • Experience with dynamometer setups or equivalent custom test rigs, from concept through fabrication.
  • Bachelor's or Master's Degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field — or equivalent hands-on experience.
  • Ability to write and maintain clean test documentation and procedures.

Bonus Qualifications:

  • Experience with planetary, harmonic/strain-wave, and cycloidal actuators specifically, and familiarity with the tradeoffs between them.
  • Experience scaling test or calibration pipelines across a large fleet of test systems.
  • Manufacturing process familiarity and first-article inspection experience.
  • Experience with CATIA V6

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Mechanical Engineer

ALTEN Technology USA · Palo Alto, CA +1 place

$115k–$125k/yrOn-site

StrongChecked open todayPosted 10 days ago

Mechanical Engineer

Arista Networks · Santa Clara, CA

$220k–$400k/yrFull-time

StrongChecked open todayPosted 1 month ago

Mechanical Engineer II

Muon Space · San Jose, CA

$153k–$172k/yrFull-timeHybrid

StrongChecked open todayPosted 1 month ago

Security Engineer

itD Tech · San Jose, CA

$44–$45/hrOn-site

StrongChecked open todayPosted 8 days ago

See more like this