Electrical Engineer jobs

Senior RF Systems Engineer (Portal)

Northwood SpaceTorrance, CAFull-timeOn-sitePosted 1 month ago

$140k–$226k/yr listed by the employer

About the typical $180k a year for senior Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 513 senior Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
5+ years
Degree
Bachelor's degree
US visa
No US visa sponsorship

Looks real and checked open today.

On Northwood Space’s own careers site (Ashby).

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Define phased-array antenna and RF architectures and translate mission, coverage, link, waveform, throughput, and regulatory requirements into system specifications.
  • Develop end-to-end SATCOM link budgets and analyze beamforming approaches and RF lineups.
  • Model how antenna and RF impairments affect communications performance, including EVM, acquisition, BER/BLER, throughput, and link availability.
  • Lead investigations of degraded system performance and support regulatory submissions, spectrum coordination, reviews, system acceptance, and deployment.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5+ years of experience with phased arrays, antenna systems, RF communication systems, or SATCOM terminals
  • Experience with communication-link analysis, including EIRP, G/T, C/N0, Eb/N0, link margin, atmospheric loss, and interference
  • Experience defining or evaluating RF lineups, including noise figure, gain, linearity, dynamic range, phase noise, filtering, and isolation
  • Hands-on experience with RF measurements and integrated system debugging using equipment such as vector network analyzers, spectrum analyzers, signal generators, noise sources, and vector signal analy
  • Experience analyzing modulation-dependent EVM, BER/BLER, adjacent-channel leakage, spectral regrowth, amplifier backoff, and link degradation (preferred)
  • Experience with SDR-integrated RF systems or collaboration with FPGA, DSP, modem, and embedded-software teams (preferred)
  • Experience with HFSS, CST, or comparable full-wave electromagnetic tools (preferred)
  • Familiarity with radar, sensing, 5G NR, 802.11ad/ay, MIMO, multi-beam systems, or electronic-warfare systems (preferred)

Education

  • Bachelor’s or advanced degree in Electrical Engineering, Communications Engineering, Applied Physics, or a related discipline

Skills

  • Understanding of digital communications sufficient to relate RF performance to modulation-dependent EVM, acquisition, BER, throughput, and spectral performance
  • Familiarity with SATCOM waveforms and standards such as DVB-S2/S2X, CCSDS, or equivalent modem architectures (preferred)

Other requirements

  • Must be willing to work extended hours and weekends as needed
  • Must be a U.S. citizen, lawful permanent resident, protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain required U.S. Department of State authorizations

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Northwood Space’s careers site

About Northwood:

Northwood is a modern space infrastructure company bringing the benefits of space to the masses through advanced communications technology. We are building a global network of phased array and parabolic ground stations that enable real-time, reliable communication for satellite missions such as national security, global connectivity, and disaster response. With a vertically integrated approach, Northwood designs, builds, and rapidly deploys scalable systems that power the next generation of space missions. If you like solving complex challenges and seeing your work deployed around the world with real impact, Northwood is the place to do it.

Show full descriptionShow less

Role: As an Senior RF & Antenna Systems Engineer you will define and evaluate phased-array RF architectures for Northwood’s satellite ground-station network. You will translate mission and link requirements into antenna, aperture, beamforming, RF front-end, calibration, and tracking requirements, and evaluate how those choices affect end-to-end communications performance.

This role sits at the intersection of phased arrays, RF systems, SATCOM links, and physical-layer communications. You will work closely with antenna, RF, DSP/communications, digital, mechanical, manufacturing, software, and operations teams to ensure that the complete ground-station system achieves its required link performance.

The ideal candidate has deep experience in phased-array or antenna systems and can reason beyond the aperture—connecting gain, scan loss, polarization, sidelobes, noise, linearity, phase noise, calibration, and propagation to EVM, acquisition, BER, throughput, and link availability.

Responsibilities:

  • Define phased-array antenna and RF-system architectures for satellite communication ground stations.
  • Translate mission, coverage, link-availability, waveform, throughput, and regulatory requirements into aperture, RF front-end, beamforming, calibration, pointing, and tracking specifications.
  • Develop and maintain end-to-end SATCOM link budgets incorporating measured aperture and RF-chain performance.
  • Analyze analog, hybrid, and digital beamforming approaches in collaboration with RF and digital implementation teams.
  • Determine how antenna and RF impairments affect communications performance, including EVM, carrier acquisition, BER/BLER, throughput, spectral compliance, and link availability.
  • Analyze RF lineups and performance budgets for gain, noise figure, dynamic range, linearity, compression, intermodulation, phase noise, frequency stability, filtering, and isolation.
  • Build Python, MATLAB, or similar models combining array behavior, measured RF performance, propagation, and modem-level metrics.
  • Lead cross-functional investigations of degraded G/T, EIRP, link margin, EVM, acquisition, tracking, BER, throughput, or spectral performance.
  • Support regulatory submissions, spectrum coordination, partner interface reviews, system acceptance, and operational deployment.

Basic Qualifications:

  • Bachelor’s or advanced degree in Electrical Engineering, Communications Engineering, Applied Physics, or a related discipline.
  • 5+ years of experience with phased arrays, antenna systems, RF communication systems, or SATCOM terminals.
  • Experience with communication-link analysis, including EIRP, G/T, C/N0 , Eb /N0 , link margin, atmospheric loss, and interference.
  • Understanding of digital communications sufficient to relate RF performance to modulation-dependent EVM, acquisition, BER, throughput, and spectral performance.
  • Experience defining or evaluating RF lineups, including noise figure, gain, linearity, dynamic range, phase noise, filtering, and isolation.
  • Hands-on experience with RF measurements and integrated system debugging using equipment such as vector network analyzers, spectrum analyzers, signal generators, noise sources, and vector signal analyzers.

Preferred Qualifications:

  • Familiarity with SATCOM waveforms and standards such as DVB-S2/S2X, CCSDS, or equivalent modem architectures.
  • Experience analyzing modulation-dependent EVM, BER/BLER, adjacent-channel leakage, spectral regrowth, amplifier backoff, and link degradation.
  • Experience with SDR-integrated RF systems or collaboration with FPGA, DSP, modem, and embedded-software teams.
  • Experience with HFSS, CST, or comparable full-wave electromagnetic tools.
  • Familiarity with radar, sensing, 5G NR, 802.11ad/ay, MIMO, multi-beam systems, or electronic-warfare systems where the experience transfers to array and RF-system architecture.

Additional Requirements:

  • Must be willing to work extended hours and weekends as needed

Compensation:

RF/Antenna Engineer/Level 3: $140,000 - $175,000 per year

RF/Antenna Engineer/Level 4: $152,000 - $190,000 per year

RF/Antenna Engineer/Level 5: $180,800 - $226,000 per year

Additional Information:

To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Northwood Space is an Equal Opportunity Employer; employment with Northwood Space is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

If you need a reasonable accommodation as part of your application for employment or interviews with us, please let us know at accommodations@northwoodspace.io

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Senior FPGA Engineer II

Rocket Lab Corporation · Long Beach, CA

$143k–$215k/yrOn-site

StrongChecked open todayPosted 15 days ago

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 7 days ago

Engineer IV

Hill Minimal 112022 · Los Angeles, CA

$215k–$245k/yr

StrongChecked open todayPosted 9 days ago

See more like this