Electrical Engineer jobs

Embedded Systems Engineer (Medical Devices)

Black Canyon ConsultingAshburn, VA +1 place

Pay not listed

Key facts

Where
Ashburn, VA · Bethesda, MD
Experience
2+ years

Looks real. 2 things to check before you apply.

On Black Canyon Consulting’s own careers site (Greenhouse), checked open today.

  • To check: No pay range listed, though one is likely required in MD, VAAsk for the pay range before you interview. The law here likely requires one.
  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: No reposts foundGreenhouse board
  • Trust score 85 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Write and verify synthesizable HDL, simulate and synthesize designs, and close timing.
  • Design FPGA-centric board schematics and work with a layout engineer on stack-up and routing.
  • Bring up boards on the bench and debug hardware using test equipment.
  • Write Python scripts to automate hardware testing.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 2–4 years of hands-on embedded or digital design work
  • Work in a regulated environment such as medical, aerospace, or automotive safety (preferred)
  • Kernel driver experience, including implementing Linux kernel drivers for hardware (preferred)

Skills

  • Written HDL (Verilog, SystemVerilog, or VHDL) that was simulated, synthesized, and timed
  • Used an FPGA toolchain end-to-end
  • Personally designed a board schematic
  • Python for scripting and data analysis
  • Comfort with an oscilloscope and a logic analyzer
  • Working knowledge of SPI, I2C, and UART and their FPGA implementations
  • Working knowledge of DSP, DDR interfaces, or high-speed signal integrity
  • C, C++, or Rust at a low level (preferred)
  • Xilinx Vivado/Vitis or AXI interconnect (preferred)
  • Zynq, MPSoC, or SoC design (preferred)
  • Precision analog front-ends, ADCs, DACs, or power management ICs (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical coverage
Dental & vision
Dental and vision coverage
Retirement plan
401(k) plan with employer contribution
Paid time off
Paid holidays and vacation
Learning & tuition
Tuition reimbursement

Full job description

From Black Canyon Consulting’s careers site

Overview

We design and build medical devices. The engineering team is small, which means you'll own real work early and see your designs go into products that reach patients. You'd own the digital logic and board-level hardware side of our systems. Our embedded software lead handles Linux, device drivers, and application code. You won't be asked to do everything. You'd be the hardware half of a two-person core.

Show full descriptionShow less

One thing we want to be upfront about: our advanced FPGA development is currently done by an engineering partner firm. We intend to bring that work in-house, and this role is how we do it. You'd start by working alongside their engineers and grow into owning it over your first year or two. This process involves reading their designs, contributing to those designs and learning the architecture. This is a funded, planned transition, and the partner firm knows and supports it. They'll continue working with us on other projects.

That means we're not expecting you to walk in and architect an FPGA on day one. We're looking for someone with strong fundamentals who wants to grow into that ownership with real support while doing it.

What you'd actually do

  • Write and verify synthesizable HDL, and close timing on real designs
  • Draw board-level schematics for FPGA-centric hardware: component selection, power architecture, clock distribution, peripheral and memory interfaces
  • Bring boards up on the bench and debug what doesn't work
  • Work with a layout engineer on stack-up and routing
  • Write Python to automate hardware testing so we stop doing it by hand
  • Contribute to design documentation and verification within our quality system
  • Grow into architectural ownership of our FPGA designs

What we need you to have done already

  • 2–4 years of hands-on embedded or digital design work
  • Written HDL that went somewhere real. Verilog, SystemVerilog, or VHDL. You've simulated it, synthesized it, and dealt with timing.
  • Used an FPGA toolchain end-to-end. We use Xilinx and Vivado. If your experience is Intel/Quartus, Lattice, or something else, the fundamentals transfer and we'll get you up to speed.
  • Drawn a schematic yourself. Altium, KiCad, OrCAD, whatever. We mean designed a board, not reviewed someone else's.
  • Written C, C++, or Rust (preferred) at a low level.
  • Python for scripting and data analysis.
  • Comfort with an oscilloscope and a logic analyzer. You should be the kind of engineer who reaches for a probe before a forum post.
  • Working knowledge of SPI, I2C, and UART and their FPGA implementations (IP Block or hand coded HDL).
  • Working knowledge of DSP, DDR interfaces, or high-speed signal integrity

Helpful, but genuinely not required

We don't expect any one candidate to have all of these. Tell us which ones you have and we'll take it from there.

  • Xilinx Vivado/Vitis specifically, or AXI interconnect
  • Zynq, MPSoC, or SoC design
  • Precision analog front-ends, ADCs, DACs, power management ICs
  • Work in a regulated environment: medical, aerospace, automotive safety
  • Kernel driver experience. Take a hardware design and implement a Linux kernel driver.

Who does well here

Someone who's honest about the edges of what they know. Someone who'd rather ask a question than guess. Someone who's willing to do the unglamorous parts: writing the test fixture, updating the schematic, and documenting the design. These are the things that allow the hardware to enter production and actually ship. If you're strong in one area and thin in another, apply anyway and tell us which is which.

How to apply

Attach your resume, plus a few paragraphs describing one hardware or HDL problem you personally debugged. Tell us

-

  • What was broken
  • How you found it
  • What you changed.

We care more about that than a skills list. If you have a GitHub, a portfolio, or a project writeup, include it.

Benefits and Salary

We attract the best people in the business with our competitive benefits package, including medical, dental, and vision coverage; a 401(k) plan with employer contribution; paid holidays, vacation, and tuition reimbursement.

We offer a competitive salary commensurate with experience and location. If you enjoy being part of a high-performing, professional, technology-focused organization, please apply today!

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Electrical Engineer

Quartermaster · Arlington, VA

$190k–$225k/yrFull-timeOn-site

StrongChecked open todayPosted 17 days ago

RF Test Engineer

Quartermaster · Columbia, MD +1 place

$150k–$175k/yrFull-timeOn-site

StrongChecked open todayPosted 7 days ago

Senior FPGA Engineer II

Rocket Lab Corporation · Chantilly, VA

$196k–$215k/yrOn-site

StrongChecked open todayPosted 1 month ago

See more like this