Texas jobs

Chief Engineer, Power Generation

FluidstackAustin, TX +3 placesFull-timeHybridPosted 1 month ago

$263k–$330k/yr listed by the employer

Key facts

Where
Austin, TX · New York, NY · San Francisco, CA · Seattle, WA · hybrid
Experience
10+ years

Looks real and checked open today.

On Fluidstack’s own careers site (Ashby).

  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
How we check

What you’ll do

  • Own and standardize generation production from module fabrication through field installation and energization across concurrent gigawatt sites.
  • Set takt time and line balance for module and skid manufacturing, and maintain performance using standard work, andon escalation, and first-pass yield targets.
  • Reduce installation time and rework through on-site kaizen events and value stream mapping with crews.
  • Improve supplier processes through audits, error-proofing, and joint improvement work, incorporating changes into standard designs.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Lean Six Sigma at black belt level (preferred)
  • Professional Engineer license (preferred)

Experience

  • 10+ years of experience in manufacturing or construction production systems built on the Toyota Production System (TPS), including takt time, standard work, and supplier development
  • Have run a TPS-based or directly derived production system and learned it by doing the work under someone experienced in the method
  • Have set takt time on a real production line, balanced it against actual cycle times, and maintained it through a demand ramp
  • Have reduced cycle time or defect rate and can explain the before and after results and changes made
  • Have stopped a production line or site when standards were not met and ensured the decision was upheld
  • Have developed a supplier on their floor, changed how they build a part, and improved incoming quality
  • Have taught the method and developed engineers who can independently run A3s and kaizen events
  • Practice inside a TPS-derived operating system at a large manufacturer (preferred)
  • Experience with modular and offsite construction, including volumetric modules, skidded MEP, and prefabricated power blocks (preferred)
  • Experience with manufacturing quality and execution systems, including MES, SPC, APQP, and PPAP (preferred)

Skills

  • Write clearly enough for fabrication supervisors, site superintendents, and executives to understand the decisions they need

Other requirements

  • Comfortable with regular travel of 25% or more, depending on business needs

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Fluidstack’s careers site

ABOUT FLUIDSTACK

We exist to make humanity more free. For most of human history, you farmed or you starved. Technology gave people more time for the things they wanted to do, instead of things they had to do. Powerful AI will be the biggest lever for human choice we've ever built - but only if models are aligned with what humanity actually wants. There are groups building AI who don't share these goals. Whoever deploys frontier compute infrastructure fastest will decide whether AI expands human freedom or shrinks it.

Show full descriptionShow less

We're singularly focused on delivering 10 to 100s of GWs of compute faster than anyone else, rethinking every layer of the stack. We acquire power, design and build data centers, and operate them - with teams spanning hardware and software. Speed and scale are our key differentiators. Come be a part of building civilization-scale infrastructure for AI.

We hire people who care deeply about this problem space. If that is you, please apply!

HOW WE OPERATE

  • Be a barrel. Full autonomy. Own things end to end, take on scope without being asked, no permission required to operate outside your core role.
  • Insane urgency. We drive everything forward as fast as possible.
  • Reason from first principles. Challenge every assumption. Zero analogy thinking, no egos, the best idea wins.
  • Love of the game. The frontier of AI is the most interesting problem of our time. We put in long hours at high intensity to push the frontier forward.
  • Build something that actually matters. If you're going to spend your time, spend it on something that matters to the world.

THE POWER GENERATION TEAM

The Power Generation team designs, sources and builds the generation that runs Fluidstack's AI infrastructure.

Examples of key problems the team is working on

  • Put solar, storage and gas in the ground at an install rate no one in the construction market has hit. We are building generation across multiple gigawatt sites at once, on a schedule traditional EPC delivery cannot meet.
  • Secure supply at a scale and timeline the supply chain cannot meet, and reshore it ourselves. Cells, containers, transformers and turbines are all constrained, so we qualify new suppliers and stand up domestic capacity instead of waiting in line.
  • Make solar, gas and storage combine into power steady enough to run AI workloads. A training run does not tolerate a dip, so the hybrid plant has to behave like firm generation even when the resource behind it does not.
  • Clear balancing authority certification, firm load rights, permits and interconnection against long clocks and a shifting policy environment. These approvals sit on the critical path to every gigawatt, so we work them years ahead of the build.

ROLE SCOPE

  • Own the production system. Own how Fluidstack builds generation, from module fabrication through field install and energization, as one standard set of work instructions repeated across concurrent gigawatt sites.
  • Set takt and hold the line. Set takt time and line balance for module and skid manufacturing, then hold the line to it with standard work, andon escalation and first-pass yield targets rather than with expediting.
  • Drive down install time and rework. Run kaizen events and value stream mapping with the crews doing the work, at the site, on the shift.
  • Take quality to the source. Run process audits, error-proofing and joint improvement work on supplier floors, and fold every fix into the standard design through change control so the next site inherits it.
  • Teach the method. Coach engineers, site leads and contractors through A3 problem solving so the system holds when you are not in the room.

WHAT WE'RE LOOKING FOR

The below is a starting point. We always make space for exceptional people, so if you don't fit this role exactly, tell us where you would. https://jobs.ashbyhq.com/fluidstack/05c2e69c-42f9-4fcb-9cf0-a467aaf98f1c

  • 10+ years of experience in manufacturing or construction production systems built on the Toyota Production System, including takt time, standard work, and supplier development.
  • You've run a production system built on the Toyota Production System or a direct derivative of it, and you learned it by doing the work under someone who had already done it.
  • You've set takt time on a real line, balanced it against actual cycle times, and held it through a demand ramp that tempted everyone around you to abandon standard work.
  • You've cut cycle time or defect rate on a process and you can name the before number, the after number, and what you changed to get there.
  • You've stopped a line, or told a site to stop, when the standard was not being met, and you made that call stick with people who outranked you.
  • You've developed a supplier on their own floor, changed how they build a part, and watched incoming quality move as a result.
  • You've taught the method to people who did not want to learn it, and left behind engineers who now run their own A3s and kaizen events without you.
  • You write clearly enough that a fabrication supervisor, a site superintendent and a CEO each get the decision they need out of the same document.
  • You're comfortable with regular travel: expect 25% or more, depending on business needs.
  • Most of our engineering team, stakeholders, and work are based in Austin, TX, and we value working in person. We have a strong preference for Austin and run a hybrid model, but we're open to other locations for the right role and candidate.
  • Bonus: Practice inside a TPS-derived operating system at a large manufacturer. Modular and offsite construction, including volumetric modules, skidded MEP and prefabricated power blocks. Lean Six Sigma at black belt level. Manufacturing quality and execution systems (MES, SPC, APQP and PPAP). Professional Engineer licence.

We are committed to pay equity and transparency.

You will receive a confirmation email once your application has successfully been accepted. If there is an error with your submission and you did not receive a confirmation email, please email careers@fluidstack.io with your resume/CV, the role you've applied for, and the date you submitted your application-- someone from our recruiting team will be in touch.

Fluidstack is an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability and protected veterans’ status, or any other characteristic protected by law. Fluidstack will consider for employment qualified applicants with arrest and conviction records pursuant to applicable law.

Applicant Privacy Notice https://fluidstack.io/legal/applicant-privacy-notice AI Screening Notice https://fluidstack.io/legal/ai-screening-notice Ashby Bias Audit https://fluidstack.io/legal/ashby-bias-audit

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Design Manager

Fluidstack · Austin, TX +3 places

$208k–$263k/yrFull-timeOn-site

Looks goodChecked open todayPosted 15 days ago

Site Manager

Fluidstack · Lubbock, TX +2 places

$206k–$244k/yrFull-timeOn-site

Looks goodChecked open todayPosted 19 days ago

Sourcing Manager, Spares

Fluidstack · Austin, TX +3 places

$199k–$262k/yrFull-timeOn-site

Looks goodChecked open todayPosted 7 days ago

Director of Site Selection

Fluidstack · Austin, TX +3 places

$244k–$341k/yrFull-timeOn-site

Looks goodChecked open todayPosted 24 days ago

See more like this