Manufacturing & Production jobs

Senior Avionics Technician

Rendezvous RoboticsGolden, COOn-site5+ years experiencePosted 5 days ago

$80k–$110k/yr listed by the employer

Looks real and checked open today.

On Rendezvous Robotics’ own careers site (Greenhouse).

Trust score ready Nov 23

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 23
See all 4 checksShow fewer
How we check

What you’ll do

  • Own PCBA and harness production stations, including station setup, tooling, work instructions, throughput, and first-pass yield.
  • Assemble, rework, and inspect PCBAs; build, route, and test wire harnesses and cable assemblies.
  • Help define and improve manufacturing processes, execute first-article builds, and update work instructions and tooling.
  • Perform light mechanical assembly, record as-built data in the MES, and report anomalies.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Current IPC J-STD-001 and IPC/WHMA-A-620 certification, or ability to obtain certification within 90 days of hire
  • IPC-A-610 certification (preferred)
  • IPC J-STD-001 Space Addendum, NASA-STD-8739 series, or similar high-reliability workmanship training (preferred)
  • Forklift or overhead crane certification (preferred)

Experience

  • 5+ years of hands-on experience assembling and reworking PCBAs and wire harnesses in a production or prototype environment
  • Experience building spacecraft, satellite, aircraft, or other flight hardware, including traveler sign-off, as-built records, and nonconformance reporting (preferred)
  • Experience operating or setting up SMT equipment, including stencil printers, pick-and-place, reflow ovens, or inspection systems (preferred)
  • Experience with an MES, ERP, or similar system for work orders and inventory (preferred)
  • Experience defining or improving production processes, including work instructions, first-article builds, yield improvement, 5S, or lean manufacturing (preferred)
  • Experience in a startup or small-team environment helping define processes (preferred)

Education

  • High school diploma or equivalent

Skills

  • Fine-pitch soldering and rework skill under a microscope (0402 passives, QFN/QFP, and similar)
  • Ability to read and work from schematics, assembly drawings, wire lists, and written procedures, and flag discrepancies before building
  • Working knowledge of ESD control (ANSI/ESD S20.20 or equivalent program) and FOD prevention
  • Comfort with basic bench instruments: multimeter, power supply, and oscilloscope
  • Familiarity with conformal coating, potting, staking, and other board-level protection processes (preferred)

Other requirements

  • U.S. person status or eligibility to obtain required U.S. Department of State authorizations

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Comprehensive medical coverage.
Dental & vision
Comprehensive dental and vision coverage.
Paid time off
May accrue 3 weeks of paid vacation., Eligible for 10 or more paid holidays per year.
Parental leave
Paid parental leave.
Equity
May be eligible for long-term incentives in the form of stock options.
Life & disability insurance
Short- and long-term disability insurance and life insurance.

Full job description

From Rendezvous Robotics’ careers site

Today, everything we send to space is constrained by what fits inside a rocket fairing. That's a fundamental bottleneck to building more capable spacecraft. Rendezvous Robotics is solving this problem with electromagnetic self-assembling tiles: modular spacecraft components that rendezvous, dock, and latch to assemble bigger and more powerful spacecraft than anything that can be folded to fit into a rocket.

Show full descriptionShow less

We're a small team based in Golden, Colorado, executing on a clear path from flight demonstration to our first operational systems. Our work spans hardware, software, and systems engineering. We are looking for the best people in the world who want to build the next generation of advanced spacecraft.

As our first Senior Technician, you will own the PCBA and harness stations of our production line and help us build the manufacturing process around them. You will assemble and rework printed circuit board assemblies, build and test wire harnesses, and perform light mechanical assembly of our tiles and test hardware, working directly with the engineers who designed them. The process is not finished, and you will help define it: the build flow, the work instructions, the tooling, the in-house surface-mount line, and the workmanship standard for every technician who follows you.

Responsibilities & Ownership

  • Own the PCBA and harness stations as part of the production process: station layout, tooling and consumables, work instructions, throughput, and first-pass yield. Hardware leaving your stations is built to drawing, and you are accountable for it.
  • Help build out the manufacturing process: define the tile build flow with manufacturing engineering, write and validate work instructions in our manufacturing execution system (MES), run first-article builds, and turn the lessons from each build into procedure and tooling updates.
  • Assemble, rework, and inspect printed circuit board assemblies to IPC-A-610 / J-STD-001 Class 3 workmanship: stencil printing, reflow, fine-pitch hand soldering, component rework, cleaning, and conformal coating.
  • Build, route, and test wire harnesses and cable assemblies from drawings and wire lists to IPC/WHMA-A-620: cutting, stripping, crimping with calibrated tooling, pinning, labeling, and continuity / isolation testing.
  • Perform light mechanical assembly of flight and development hardware: fastener installation and torque, threaded insert installation, bonding and staking, and fit checks against drawings.
  • Execute work orders and procedures in the MES, record as-built data and serial numbers, and file anomaly reports when something does not match the drawing.
  • Help bring up our in-house SMT line: stencil printer setup and evaluation, reflow oven profiling, first-article builds, and the work instructions that make them repeatable.
  • Maintain ESD, FOD, and cleanliness controls in the work area; keep tools calibrated, checked out, and accounted for.
  • Support test campaigns: build test fixtures and cabling, set up data acquisition, and assist test engineers during functional and environmental tests.
  • Train and mentor associate technicians and review their work before it moves to the next station.

Basic Qualifications

  • High school diploma or equivalent.
  • 5+ years of hands-on experience assembling and reworking PCBAs and wire harnesses in a production or prototype environment.
  • Current IPC J-STD-001 and IPC/WHMA-A-620 certification, or the ability to obtain certification within 90 days of hire (IPC-A-610 a plus).
  • Demonstrated fine-pitch soldering and rework skill under a microscope (0402 passives, QFN/QFP, and similar).
  • Ability to read and work from schematics, assembly drawings, wire lists, and written procedures, and to flag discrepancies before building to them.
  • Working knowledge of ESD control (ANSI/ESD S20.20 or equivalent program) and FOD prevention.
  • Comfortable with basic bench instruments: multimeter, power supply, and oscilloscope for continuity, isolation, and go/no-go checks.
  • U.S. person status required (see below).

Preferred Qualifications

  • Experience building spacecraft, satellite, aircraft, or other flight hardware, including the documentation discipline that comes with it (traveler sign-off, as-built records, nonconformance reporting).
  • IPC J-STD-001 Space Addendum, NASA-STD-8739 series, or similar high-reliability workmanship training.
  • Experience operating or setting up SMT equipment: stencil printers, pick-and-place, reflow ovens, or inspection systems.
  • Familiarity with conformal coating, potting, staking, and other board-level protection processes.
  • Experience with an MES, ERP, or similar system for work orders and inventory.
  • Forklift or overhead crane certification; comfortable with safe lifting and rigging of hardware.
  • Experience defining or improving a production process: authoring work instructions, first-article builds, yield improvement, 5S, or lean manufacturing.
  • Experience in a startup or small-team environment where you helped define the process rather than inherit it.

Compensation and Benefits

Engineer (Early Career): $80,000 - $110,000

Senior Technician: $36.00 - $60.00 per hour

This is an hourly, non-exempt position, and overtime is paid at 1.5x your hourly rate in line with Colorado law. Your actual level and hourly rate will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. In addition to your hourly pay, you may also be eligible for long-term incentives in the form of stock options. You will receive access to comprehensive medical, vision, and dental coverage, short- and long-term disability insurance, life insurance, and paid parental leave. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year.

ITAR Requirements

To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

Equal Opportunity

Rendezvous Robotics is an Equal Opportunity Employer; employment with Rendezvous Robotics is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Something wrong with this job? Report it

Similar jobs

Technician II

Infleqtion · Boulder, CO +1 place

$60k–$75k/yrFull-timeOn-site

StrongLast seen open yesterdayPosted 18 days ago

Quality Technician

Loenbro · Colorado

$27–$45/hrFull-timeOn-site

StrongChecked open todayPosted 11 days ago

Senior QMS Engineer

Anduril · Fort Collins, CO

$127k–$170k/yrFull-timeOn-site

StrongChecked open todayPosted 18 days ago

See more like this