Manufacturing & Process Engineer jobs

Senior Manufacturing Engineer

Davis MachineEuless, TXFull-timeOn-sitePosted 1 month ago

$80k–$120k/yr listed by the employer

Key facts

Schedule
1st shift
Experience
5+ years
Degree
Associate degree or equivalent

Strong: looks real and checked open today.

On Davis Machine’s own careers site (Workable).

  • Checked: On the company's own careers siteWorkable board
  • Checked: Checked open todayWorkable board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundWorkable board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Review drawings, models, specifications, and flowdowns; identify processes, critical features, risks, and post-processing needs, and document the manufacturing plan.
  • Review setup documentation and job packets, then verify revision, programs, tooling, and documentation at the release gate before production starts.
  • Resolve technical issues raised by Operations on running jobs by routing them to the appropriate engineering contact and closing the issue back with Operations.
  • Prepare proposed process, tooling, and software changes for Engineering Manager approval.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Five or more years in aerospace manufacturing engineering, with direct experience of machined structural or hard-material components
  • Demonstrated record of running customer engineering meetings and technical correspondence with prime or tier-1 engineering
  • Experience with nonconformance disposition in an AS9100 environment
  • Familiar with process documentation, travelers, and job release in a job-shop ERP
  • Prime or tier-1 experience (Lockheed, Bell, Parker, etc.) (preferred)
  • CAM exposure (Mastercam, CATIA, Esprit) or machinist/setup background (preferred)

Education

  • Bachelor's degree in Mechanical, Manufacturing, Aerospace, or Industrial Engineering, or a closely related engineering or engineering technology discipline; equivalent technical associate's degree and

Skills

  • Fluent in engineering drawings, 3D models, GD&T, and PMI/MBD; able to identify critical features and process requirements from the drawing without a programmer's help
  • Working knowledge of multi-axis machining, workholding, and cutting tools sufficient to build a plan with programmers and challenge it
  • Tool library systems (Wintool or similar) (preferred)

Other requirements

  • US person as defined under ITAR/EAR
  • Background check and drug screen required
  • Interest in progression to Engineering Manager (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance
Dental & vision
Dental and vision insurance
Retirement plan
401(k) retirement plan
Paid time off
Paid Time Off (PTO), Eight paid holidays

Full job description

From Davis Machine’s careers site

Senior Manufacturing Engineer

Davis Machine & Manufacturing · Euless, TX · On-site · Full-time, salaried exempt

$80,000–$120,000

Company Davis Machine is an AS9100-certified precision machining company serving the aerospace industry from a 75,000 sq ft campus in Euless, Texas. The business is built on two complementary lines of work: high-volume, low-mix production of stainless steel, Inconel, and other hard-material components, and low-volume, high-mix machining of complex aluminum and titanium structural parts. Davis is affiliated with sister companies in surface finishing and engineering, giving customers a single group for machined, finished, and engineered components.

Show full descriptionShow less

Position summary The Senior Manufacturing Engineer leads manufacturing planning from quoting through production release. This role uses hands-on machine shop experience and knowledge of equipment capabilities to estimate machining requirements, develop efficient production plans, and identify potential challenges before work reaches the shop floor.

Responsibilities include reviewing drawings and specifications, resolving technical issues during pre-production, and coordinating with internal teams and customers to ensure requirements are understood and projects stay on track. Strong organization, attention to detail, and clear communication are essential to managing multiple projects and supporting a smooth transition to production.

After production release, Operations takes responsibility for the job, while the Senior Manufacturing Engineer continues to provide engineering support and help resolve technical questions. This position focuses primarily on planning and pre-production engineering, drawing on practical machining knowledge to support successful shop-floor execution.

Reports to the Engineering Manager.

Accountabilities

  • Drawing review and investigation. Reads model, drawing, specifications, and flowdowns on every new and rerun part; identifies required processes, critical features, and risks; identifies post-processing, assembly, and CMM operations; writes the OSP and process notes that carry into the quote and the plan. Brings the findings to the programmers; the plan for manufacture is built as a team, then documented and established. Fixtures are conceptualized as a team.​
  • Setup documentation review. Reviews setup documentation for floor consideration, adjusts notes, and confirms they match the established plan.​
  • Plan and traveler review. Reviews the (planner built) job packet for completeness and accuracy against the drawing, flowdowns, and setup documents.​
  • Release gate. Confirms revision matched to the last build, drawing/model/flowdown current, program at revision, tooling on hand, reviews above passed. The floor does not start a job that has not cleared this gate.​
  • First call for Operations. When the Operations Manager has a problem that engineering needs to resolve on a running job, the Manufacturing Engineer is the point of contact: takes it, routes it to the programmer or the EM, and closes it back to Operations. Requests come through the Operations Manager or Supervisor, not walk-ups. Does not run the job.​
  • Change control. Writes proposed process, tooling, and software changes to the standard template (problem, intended outcome, scope, customer-requirement check) for Engineering Manager approval, including changes that come back from prove-out or the floor.​
  • Customer engineering communication. Prepares and runs the regular customer engineering meetings and the technical correspondence between them; keeps discussions organized and moving; closes actions. Engineering Manager attends as needed for authority, escalation, and broader direction.​
  • Nonconformance. Drafts the technical disposition with Quality and carries it to the customer, with the Engineering Manager as escalation.​

Requirements

  • Bachelor's degree in Mechanical, Manufacturing, Aerospace, or Industrial Engineering, or a closely related engineering or engineering technology discipline. An equivalent combination of a technical associate's degree and additional directly related aerospace manufacturing engineering experience will be considered.​
  • Five or more years in aerospace manufacturing engineering, with direct experience of machined structural or hard-material components​
  • Fluent in engineering drawings, 3D models, GD&T, and PMI/MBD; able to identify critical features and process requirements from the drawing without a programmer's help​
  • Working knowledge of multi-axis machining, workholding, and cutting tools sufficient to build a plan with programmers and challenge it​
  • Demonstrated record of running customer engineering meetings and technical correspondence with prime or tier-1 engineering
  • Experience with nonconformance disposition in an AS9100 environment​
  • Familiar with process documentation, travelers, and job release in a job-shop ERP​
  • US person as defined under ITAR/EAR

Preferred

  • Prime or tier-1 experience (Lockheed, Bell, Parker, etc.)​
  • CAM exposure (Mastercam, CATIA, Esprit) or machinist/setup background​
  • Tool library systems (Wintool or similar)​
  • Interest in progression to Engineering Manager​

Schedule and requirements First shift Monday through Friday, with extended hours during prove-out and customer deadlines. US person as defined under ITAR/EAR. Background check and drug screen required.

Benefits

$80,000–$120,000 base salary, determined by prime/tier-1 experience, aerospace program depth, and deviation/MRB record.

  • Medical, Dental & Vision Insurance
  • 401(k) Retirement Plan
  • Paid Time Off (PTO)
  • Eight Paid Holidays

Something wrong with this job? Report it

Similar jobs nearby

Process Engineer

Onyx Specialty Processing · Decatur, TX

Full-timeOn-site

StrongPay not listedLast seen open yesterdayPosted 1 month ago

See more like this