Electrical Engineer jobs

Principal RF Hardware Engineer

AnySignalLos Angeles, CAFull-timeOn-site

$210k–$260k/yr listed by the employer

Above the typical $219k a year for principal-level Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 94 principal-level Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Looks real. 1 thing to check before you apply.

On AnySignal’s own careers site (Ashby), checked open today.

  • To check: Posted by the employer 2 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteAshby board
  • Checked: Checked open todayAshby board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundAshby board
  • Trust score 89 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Own space-radio RF hardware designs from architecture and cascade budgets through schematic, layout direction, bring-up, characterization, qualification, and flight support.
  • Design and analyze transmit and receive chains and verify cascade performance against bench data.
  • Drive PCB stackup, controlled-impedance routing, RF layout, grounding, shielding, and board-level thermal considerations.
  • Select and qualify space-grade EEE parts, support environmental qualification, and lead failure analysis and anomaly resolution.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 10+ years designing RF and microwave hardware
  • Multiple programs with personally designed hardware that has flown and operated on orbit
  • End-to-end ownership of architecture and budgets, schematic, layout direction, bring-up, and bench characterization on the same designs
  • Working practice in space-grade parts selection, derating, and reliability
  • Integration experience with Xilinx MPSoC or RFSoC devices (preferred)
  • Phased array, beamforming, or multi-channel coherent system experience (preferred)
  • Track record as the named technical authority on a program, holding a design position under schedule and customer pressure (preferred)

Skills

  • Expert-level ECAD
  • RF/EM simulation tools such as ADS, Microwave Office, HFSS, or CST
  • Expert command of RF fundamentals, with the ability to derive rather than look up
  • Strong bench skills, including soldering, rework, and methodical board debug
  • Altium (preferred)
  • Software-defined radio architectures, direct RF sampling, and wideband data converters (preferred)
  • DSP and communications theory fluency (preferred)
  • Python or equivalent scripting for automated test and data analysis (preferred)

Other requirements

  • U.S. citizenship, lawful U.S. permanent residence, protected-individual status, or eligibility to secure required U.S. Department of State authorizations

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical coverage, HSA
Dental & vision
Dental and vision coverage
Retirement plan
401K program
Equity
Equity grant

Full job description

From AnySignal’s careers site

COMPANY

AnySignal is developing the next generation of RF products and services for some of the most demanding space and defense missions. We’re building a flexible, high-performance platform that’s easy to deploy, monitor, and scale, enabling customers to bring advanced radio technologies to life faster than ever before.

THE ROLE

We're hiring a Principal RF Hardware Engineer to own the design of the RF hardware at the core of our space radios. This is the most senior individual contributor role on the RF hardware team, and it is a permanent IC role rather than a path into management.

Show full descriptionShow less

You will own designs end to end — architecture and cascade budgets, schematic, layout direction, bring-up, characterization, and support through qualification and flight. You will also set the technical standard for RF hardware here: how designs are reviewed, what verification is expected before a board is released, and what documentation has to exist after.

Our radios fly, so the work is judged on what survives launch and performs on orbit.

WHAT YOU'LL DO

  • Own space radio RF hardware designs end to end: architecture and cascade budgets, schematic capture, layout direction, board bring-up, characterization, and support through qualification and flight.
  • Design and analyze receive and transmit chains — LNAs, mixers, filters, amplifiers, frequency synthesis and PLLs, data converters, and the high-speed interfaces into the digital section.
  • Own cascade performance: noise figure, gain and flatness, linearity and IM3, spurious, phase noise, EVM, and end-to-end sensitivity, with analysis you can defend against bench data.
  • Drive PCB stackup, controlled-impedance routing, RF layout, grounding and shielding strategy, and thermal considerations at the board level — working through layout rather than handing off a schematic and walking away.
  • Run bring-up and characterization on the bench: VNA, spectrum and signal analyzers, signal generators, noise figure meters, high-speed scopes, TDR.
  • Select and qualify EEE parts for the space environment: derating, radiation tolerance and single-event effects mitigation, screening, upscreening, and reliability analysis.
  • Support environmental qualification, and lead failure analysis and anomaly resolution when hardware misbehaves — on the bench or on orbit.
  • Set the technical standard for RF hardware: simulation and verification expectations, design review rigor, and documentation that outlives the designer.
  • Raise the bar around you through design reviews, mentorship, and technical interviewing — influence through demonstrated judgment rather than reporting lines.

REQUIRED SKILLS

  • 10+ years designing RF and microwave hardware, with genuine depth rather than adjacency.
  • Multiple programs with hardware you personally designed that has flown and operated on orbit.
  • Demonstrated end-to-end ownership: architecture and budgets, schematic, layout direction, bring-up, and bench characterization on the same designs.
  • Expert-level ECAD (Altium preferred) and RF/EM simulation tools such as ADS, Microwave Office, HFSS, or CST.
  • Excellent first-principles command of RF fundamentals, and the ability to derive rather than look up.
  • Strong bench skills, including soldering, rework, and methodical debug of boards that don't work yet.
  • Working practice in space-grade parts selection, derating, and reliability — you know why a part that works on the bench still doesn't fly.

DESIRED SKILLS

  • Software-defined radio architectures, direct RF sampling, and wideband data converters.
  • Integration experience with Xilinx MPSoC or RFSoC devices.
  • Phased array, beamforming, or multi-channel coherent system experience.
  • Enough DSP and communications theory fluency to argue productively with the FPGA and waveform teams.
  • Python or equivalent scripting for automated test and data analysis.
  • Track record as the named technical authority on a program, holding a design position under schedule and customer pressure.

COMPENSATION

The estimated base salary range for this role is $210,000 – $260,000 per year, plus equity. This range reflects our good-faith estimate for this position at the time of posting. The final base salary offered will depend on a variety of factors, including the candidate's qualifications, relevant experience, skills, and market considerations. In addition to base salary, total compensation includes an equity grant and our full benefits package (Medical, Dental, Vision), HSA's and 401K program.

ADDITIONAL INFORMATION

In order to comply with the space technology export rules of the U.S. Government, such as the International Traffic in Arms Regulations (ITAR), it is necessary to be a U.S. citizen, a lawful U.S. permanent resident, a protected individual as specified by 8 U.S.C. 1324b(a)(3), or possess eligibility to secure the necessary authorizations from the U.S. Department of State. For additional information on ITAR, please seek further details.

AnySignal is committed to building an inclusive and accessible workplace where all employees feel respected, supported, and able to contribute fully. We welcome applicants from all backgrounds, including women, veterans, individuals with disabilities, and members of underrepresented communities.

Should you have a need for accommodation, AnySignal will endeavor to meet your accommodation needs. At any stage of the recruitment and selection process you may make your needs for accommodation known through contacting our team, in confidence, by email to: careers@anysignal.com

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 8 days ago

Engineer IV

Hill Minimal 112022 · Los Angeles, CA

$215k–$245k/yr

StrongChecked open todayPosted 10 days ago

Electrical Engineer IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$130k–$135k/yrFull-timeOn-site

StrongChecked open todayPosted 19 days ago

HW Design Engineer

ALTEN Technology USA · Palo Alto, CA +1 place

$130k–$150k/yrOn-site

StrongChecked open todayPosted 11 days ago

See more like this