Manufacturing & Production jobs

FEC Termination Tech

TrexonMA - Braintree | First Electronics Corp +1 placeOn-site

$15.69–$25.00/hr listed by the employer

Key facts

Pay per year
≈ $33k–$52kEstimate for full-time hours.
Where
MA - Braintree | First Electronics Corp · Braintree, MA · on-site

Looks real. 1 thing to check before you apply.

On Trexon’s own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 23 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 75 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Measure wire, remove insulation, and prepare conductors and shield braid for termination.
  • Use heat guns, crimp tools, and soldering techniques to prepare wires, contacts, and connectors.
  • Insert wires into connectors and check electrical continuity with a low-voltage wire buzzer.
  • Follow work instructions and wiring diagrams while meeting cable manufacturing workmanship standards.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Complete wire termination duties after training, including wire preparation, crimping, and connector insertion
  • Prior IPC-620 cable manufacturing experience and proficiency with the listed termination tasks (preferred)

Skills

  • Develop proficiency in wire tinning, solder application, reading wiring diagrams, and IPC-620 cable manufacturing upon completion of training
  • Ability to communicate in English (preferred)

On the job

  • Close vision, color vision, depth perception, and ability to adjust focus
  • Ability to meet the position’s minimum vision requirements, with magnification if needed
  • Occasionally lift or move up to 25 pounds
Show 1 moreShow less
  • Occasionally crouch, stoop, or reach; regularly stand, walk, sit, and talk or hear

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Trexon’s careers site

Job Description

Termination Technician

Pay Range: $15.69 - $25.00

Summary

The First Electronics Corporation (FEC) specializes in the manufacture of over-molded, extra flexible, multi-conductor, fully EMI-shielded cable assemblies, harnesses and electro-mechanical assemblies custom built for military applications and harsh environments. FEC also produces electro-mechanical assemblies and systems for custom applications, all with no minimum quantity requirements. FEC is AS9100D and IPC/WHMA-A-620 Certified.

Show full descriptionShow less

The First Electronics Corporation (FEC)’s wire and cable termination team is responsible for ensuring wire signals and the electrical integrity of wire performance meet the requirements of the customers’ designs and expectations. This position is responsible for wire preparation, insulation removal, pin crimping onto the end of an electrical wire conductor that will be inserted or soldered into a connector. Minimum vision (aided with magnification) requirements and an ability to understand and carry out work instructions and take supervisor instruction are also important in this role.

Minimum Qualifications

Experience: Prior experience with IPC-620 cable manufacturing and proficiency with any of the tasks detailed below is strongly desired and a major advantage, as well as being able to communicate and share in the English language; however, is not required. The company will train in all duties required to perform the essential functions of the job

Knowledge: Training will be provided on internal FEC/Trexon processes and systems, as required for this position. Training for the role will include removing wire, insulation, tinning the wire, using a crimp tool to crimp a contact onto the wire, and using proper insertion tools to insert wires into connectors.

Skills: We look for team members who demonstrate attention to detail, patience, and manual dexterity, pride of workmanship and an ability to understand training principles for proper cable and wire manufacturing techniques.

Physical Requirements

Specific Position Duties

Essential functions of the job:

  • Wire measurement (SAE Standards)
  • Wire insulation removal
  • Use of a heat gun to flow solder, solder sleeves, and shrink heat shrink insulation
  • Use of crimp tools to properly crimp pins on wire
  • Checking for electrical conductivity with a low-voltage wire buzzer to make sure the prepared wire and contact show electrical continuity
  • Removal or separation of metal shield bread on wire with a razor blade and a small pick to terminate the shield braid and expose the wire conductors underneath the shielding

Advanced skills required upon completion of training includes:

  • Tinning of wire
  • Solder application to wire, contact pins and sockets, and terminal lugs
  • Ability to understand numbers and letter symbols on a wiring diagram
  • Good workmanship in accordance with IPC- 620 cable manufacturing

Other responsibilities, initiatives and ad-hoc projects as required.

The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, sit, and talk or hear. The employee must occasionally lift and/or move up to twenty-five (25) pounds. The employee must occasionally crouch, stoop, or reach. Specific vision abilities required by this job include close vision, color vision, depth perception and ability to adjust focus. The noise level in the work environment is usually moderate.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Testing Technician

Trexon · Braintree, MA

$18–$22/hrFull-timeOn-site

StrongChecked open todayPosted 18 days ago

Molding Technician

Trexon · Chelsea, MA

$18–$25/hrOn-site

Looks goodOpen 7 monthsChecked open todayPosted 7 months ago

Receiving Inspector

Trexon · Longmont, CO

$18–$25/hrOn-site

StrongChecked open todayPosted 15 days ago

Manufacturing Estimator

Trexon · Hudson, NH

Pay not listedOn-site

Looks good2 to checkChecked open todayPosted 3 months ago

See more like this