Mechanical Engineer jobs

Mechanical Engineer, Production Test

ZiplineSouth San Francisco, CAOn-siteBachelor's degree or equivalentPosted 22 days ago

$125k–$145k/yr listed by the employer

About the typical $135k a year for mid-level Mechanical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 126 mid-level Mechanical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Strong: looks real and checked open today.

On Zipline’s own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Design, build, validate, and maintain mechanical fixtures and interfaces for production testers and calibration stations.
  • Integrate fixtures with instrumentation, sensors, actuators, harnesses, safety systems, and electrical and software test equipment.
  • Define and validate test acceptance criteria, fixture repeatability, and production release evidence with engineering, quality, and operations teams.
  • Troubleshoot production-floor fixture and tester issues, and improve yield, false-fail rates, uptime, and cycle time.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 2+ years building production test systems, automated test equipment, or end-of-line testers for electro-mechanical or mechatronic products
  • Demonstrated ownership of multiple shipped tester programs
  • Hands-on shop-floor experience
  • Strong test automation experience, including experience with LabVIEW, TestStand, embedded test frameworks, or equivalent
  • Experience integrating DAQ, scopes, DMMs, power supplies, and electronic loads
  • Track record of delivering measurable production improvements and owning metrics reporting
  • Experience working directly on manufacturing floors during launches and escalations, including significant onsite support for shifts, debugging, and equipment qualification
  • Experience coordinating vendor builds, FAT/SAT, and production qualification activities
  • 5–7 years of relevant experience (preferred)

Education

  • BS in Electrical, Mechatronics, Mechanical, or Computer Engineering, or equivalent experience

Skills

  • Practical skills in instrumentation, signal measurement, power delivery, harnessing, connectorization, sensor/actuator interfaces, and PCBA debug
  • Proficiency with embedded/product interfaces (CAN, UART, Ethernet, I2C, SPI, USB) and strategies for validating communications and firmware-hardware interactions
  • Practical hands-on test and debug capability
  • Python (preferred)

Other requirements

  • Rigorous attention to safety and traceability
  • Role based onsite-first at the South San Francisco manufacturing site, with regular floor presence; travel to other sites or vendor locations may be required

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance.
Dental & vision
Dental and vision insurance.
Paid time off
Paid time off.
Equity
Equity compensation may be included in the total compensation package.
Bonus
Discretionary annual or performance bonuses may be included.

Full job description

From Zipline’s careers site

About Zipline

Zipline is the world’s largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world’s largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products.

Show full descriptionShow less

Our customers include the world’s largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we’ve built to enable seamless, reliable, global operations.

Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe.

We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people’s lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds.

About You & the Role

We are hiring a Mechanical Engineer, Production Test to own the mechanical fixtures and test interfaces that enable repeatable production testing of Zipline aircraft, docks, delivery pods, and subassembly hardware. You will design how products are located, loaded, supported, and connected to production testers and calibration stations, integrating sensors, actuators, instrumentation, and safety interfaces with electrical and software partners. Your work will make fixtures repeatable, maintainable, and practical to operate at production rates.

Zipline operates safety-critical autonomous aircraft and logistics systems that deliver medicine and essentials across varied field conditions; production test directly affects fleet uptime, field reliability, and customer deliveries. In this hands-on individual-contributor role you will own your discipline’s contribution to end-to-end test system delivery for factory floors that support high-throughput manufacturing and rapid product iterations. You will be expected to prioritize safety, traceability, and measurable improvements in yield and time-to-deploy while working in a fast-scaling production environment with direct consequences for aircraft reliability and delivery network performance.

What You’ll Do

  • Design production test fixture mechanics for repeatable product locating, loading, handling, and connection, with attention to safe operation and maintainability.
  • Integrate instrumentation, sensors, actuators, harnessing, and safety interlocks into mechanical fixtures with electrical and software partners; validate fixture correlation and repeatability.
  • Own mechanical design, delivery, and sustainment for production testers and calibration stations from requirements through internal or vendor build, installation, validation, and continuous improvement for aircraft, dock, pod, and subassembly builds.
  • Partner on tester acceptance criteria and validate fixture contributions to: test coverage, pass/fail limits, golden-unit strategy, GR&R, capability targets, and production release criteria in partnership with Electrical Design, Firmware, Quality, and Operations.
  • Collaborate with electrical and software engineers to integrate electrical and functional testers including harnessing, DAQ, sensors/actuators, power systems, safety interlocks, and mechanical fixtures to meet cycle-time and throughput targets.
  • Partner on test automation and data pipelines (Python, LabVIEW/TestStand or equivalent) and validate fixture interactions to enable reproducible, high-throughput test flows, data logging, MES/MFG integration, and production dashboards.
  • Drive measurable outcomes: increase first-pass yield, reduce false-fail rate, improve tester uptime/utilization, and shorten per-unit cycle time; set targets and report progress monthly.
  • Troubleshoot and resolve production escalations on the floor: resolve fixture issues, tester instability, and product/tester correlation failures, partnering with electrical and software engineers on PCBA-level failures and software bugs under time pressure.
  • Support cross-functional launches: coordinate requirements, validation plans, training, calibration schedules, spares strategy, and change control with Manufacturing Engineering, Quality, Technicians, Operations, and external vendors.
  • Identify and deploy scalable tester architectures and automation that reduce operator steps, minimize touch time, and standardize interfaces across lines.
  • Produce and maintain test documentation: test procedures, maintenance/calibration plans, validation records, and change-control artifacts required for production readiness and traceability.

What You’ll Bring

  • 2+ years building production test systems, automated test equipment, or end-of-line testers for electro-mechanical or mechatronic products; demonstrated ownership of multiple shipped tester programs.
  • BS in Electrical, Mechatronics, Mechanical, Computer Engineering, or equivalent experience.
  • Deep practical skills in instrumentation, signal measurement, power delivery, harnessing, connectorization, sensor/actuator interfaces, and PCBA debug with hands-on shop-floor experience.
  • Strong test automation experience: Python preferred; experience with LabVIEW, TestStand, or embedded test frameworks and integrating DAQ, scopes, DMMs, power supplies, and electronic loads.
  • Proficiency with embedded/product interfaces (CAN, UART, Ethernet, I2C, SPI, USB) and strategies for validating communications and firmware-hardware interactions.
  • Track record of delivering measurable production improvements (first-pass yield, cycle time, false-fail reduction, tester utilization, GR&R) and owning metrics reporting.
  • Experience working directly on manufacturing floors during launches and escalations; willing to spend significant onsite time supporting shifts, debugging, and qualifying equipment.
  • Comfortable with frequent cross-functional coordination and coordinating vendor builds, FAT/SAT, and production qualification activities.
  • Must-have traits: rigorous attention to safety and traceability, decisive technical judgment under production pressure, practical hands-on test/debug capability, and insistence on measurable outcomes.
  • Location & logistics: role is based at Coop, Zipline’s South San Francisco manufacturing site (onsite-first with regular floor presence); travel to other Zipline sites or vendor locations may be required for launches and validations.

First-Year Success

  • Deliver and validate production tester programs with documented acceptance criteria and production-release evidence.
  • Reduce false failures and improve first-pass yield, cycle time, and tester uptime for supported lines.
  • Sustain traceable, repeatable test execution and report progress against agreed production goals.

Nice to Have

  • 5–7 years of relevant experience preferred.

What Else You Need to Know

The starting cash range for this role is $125,000 - $145,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. We are always open to negotiation. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

As set forth in Zipline ’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Something wrong with this job? Report it

Similar jobs nearby

Mechanical Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted yesterday

Mechanical Engineer

The Beauty Tech Group Trading Limited · Livermore, CA

$120k–$160k/yrContractOn-site

StrongChecked open todayPosted 10 days ago

Mechanical Engineer II

Agility Robotics · Fremont, CA

$108k–$140k/yrFull-timeHybrid

StrongChecked open todayPosted 1 month ago

Mechanical Design Engineer

Skild AI · San Mateo, CA

$100k–$250k/yr · see posting

Wide pay rangeChecked open todayPosted 1 month ago

See more like this