Electrical Engineer jobs

Associate Engineer, Electrical Failure Analysis

EurofinsSunnyvale, CAFull-timeOn-siteBachelor's degreePosted 4 days ago

Pay not listed

This job is closed.

The employer took it down yesterday, after 2 days open. Here are similar open jobs.

  • To check: No pay range listed, though one is likely required in CAAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteSmartRecruiters board
  • Note: Last seen open 2 days agoLive check
  • Trust score 89 / 100 · Looks good
See all 4 checksShow fewer
How we check

Similar open jobs

ENGINEER IV

O2EPCM, Inc. dba O2 Engineering, Projects & Construction Management · Los Angeles, CA

$239k–$249k/yrFull-timeHybrid

StrongChecked open todayPosted 8 days ago

Power Grid Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

See more like this

What you’ll do

  • Perform bench testing and characterization of semiconductor devices, components, and assemblies; assist with electrical measurements and failure reproduction.
  • Read schematics, compare expected and measured behavior, and troubleshoot to isolate potential failure locations.
  • Collect, analyze, and document test data while maintaining sample integrity and traceable records.
  • Work with engineers to determine whether additional analysis is needed and communicate findings.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Hands-on academic, research, internship, or project experience with common test equipment: digital multimeter, oscilloscope, DC power supply, and signal/function generator
  • Internship, research, capstone, or project experience in electronics, semiconductor devices, electrical testing, troubleshooting, or reliability (preferred)
  • Exposure to curve tracing, SMUs, semiconductor parameter analyzers, optical microscopy, or component-level testing (preferred)
  • Experience with Cadence, SPICE, MATLAB, Python, or LabVIEW, and with data analysis and technical reports (preferred)

Education

  • Bachelor of Science in Electrical Engineering (BSEE)

Skills

  • Strong foundation in circuit analysis, analog and digital electronics, and semiconductor fundamentals
  • Basic understanding of electrical measurements, I-V characteristics, schematics, and structured troubleshooting
  • Understanding of safe lab practices, including ESD controls and safe electrical test setup
  • Familiarity with EMMI, IR thermography/LIT, microprobing, TDR, ATE, SEM/EDS, X-ray, or FIB fault-isolation techniques (preferred)

On the job

  • Able to continuously operate a computer or lab equipment for 4+ hours and remain stationary 80% of the time
  • Able to handle small, fragile devices and meet close-distance visual acuity requirements, with or without correction
  • Willing and able to wear required PPE, including respirator, hard hat, steel-toed shoes, safety glasses, and laboratory coat
Show 1 moreShow less
  • Able to move equipment or items up to 50 lbs

Other requirements

  • Must meet ITAR U.S. Person status: U.S. Citizen, U.S. Permanent Resident, or Protected Individual (asylee or refugee)
  • Work fully onsite in Sunnyvale, CA
  • Able to communicate clearly, learn and remember processes, maintain focus, complete tasks independently, and make timely workflow decisions

Benefits

Health insurance
Medical coverage
Dental & vision
Dental and vision coverage
Retirement plan
401(k) company matching
Learning & tuition
Education assistance and career development programs
Wellness & mental health
Wellness program

Also: paid time off

Full job description

From Eurofins’ careers site

Company Description

Eurofins EAG Laboratories is a global leader in electrical and materials analytical testing. Our engineers help companies developing advanced technologies investigate failures, understand materials, and improve product performance. At EAG, you will apply your engineering education to real-world problems in a hands-on laboratory while learning from experienced scientists and engineers.

Job Description

Show full descriptionShow less

We are looking for an early-career Electrical Engineer, such as a recent BSEE graduate, interested in developing expertise in Electrical Failure Analysis (EFA). You will apply electrical engineering fundamentals to investigate failures in semiconductor devices, electronic components, and assemblies: performing electrical testing, reproducing failures, analyzing results, and working with experienced engineers to determine what happened and why.

What You’ll Do

  • Perform electrical bench testing and characterization of semiconductor devices, components, and assemblies using multimeters, oscilloscopes, DC power supplies, signal generators, and other test instruments.
  • Assist with I-V characterization, continuity testing, open/short analysis, leakage measurements, and failure reproduction.
  • Read schematics, compare expected versus measured behavior, and apply structured troubleshooting to isolate potential failure locations.
  • Collect, analyze, and document test data and results, protecting sample integrity and keeping accurate, traceable records.
  • Work with EAG engineers to determine when additional analysis is needed, and communicate findings clearly.
  • Build specialized EFA skills through training, mentorship, and cross-training.
  • Follow EAG safety, quality, confidentiality, ESD, and laboratory procedures.

What Success Looks Like at EAG

You do not need to arrive knowing how to operate specialized failure analysis equipment. We are looking for strong electrical engineering fundamentals, hands-on curiosity, good laboratory discipline, and the ability to learn.

Early success means learning EAG’s lab, safety, quality, and documentation practices while building proficiency in bench testing and failure reproduction. Over time, you will take on more independent work and more advanced fault-isolation techniques.

The goal is to build your ability to follow the evidence, ask the right questions, and turn test results into sound conclusions for our clients.

Why EAG?

At EAG, you will have the opportunity to:

  • Apply your BSEE to challenging, real-world semiconductor and electronics problems.
  • Learn from experienced engineers and scientists across multiple technical disciplines.
  • Gain hands-on experience with advanced analytical and failure analysis technologies.
  • Work on a variety of client problems while growing through cross-training and increasing responsibility.

Qualifications

Compliance Requirement (ITAR): This position supports work subject to U.S. export control regulations. Applicants must meet U.S. Person status as defined by ITAR: U.S. Citizen, U.S. Permanent Resident (Green Card) or Protected Individual (asylee or refugee)

Must Have:

  • Bachelor of Science in Electrical Engineering (BSEE).
  • Strong foundation in circuit analysis, analog and digital electronics, and semiconductor fundamentals.
  • Hands-on academic, research, internship, or project experience with common test equipment (digital multimeter, oscilloscope, DC power supply, signal/function generator).
  • Basic understanding of electrical measurements, I-V characteristics, schematics, and structured troubleshooting, with the ability to distinguish observations from conclusions.
  • Understanding of safe lab practices, including ESD controls and safe electrical test setup.
  • Attention to detail, clear technical documentation, and interest in developing Electrical Failure Analysis expertise.

Preferred Experience

  • Internship, research, capstone, or project experience in electronics, semiconductor devices, electrical testing, troubleshooting, or reliability.
  • Exposure to curve tracing, SMUs, semiconductor parameter analyzers, optical microscopy, or component-level testing.
  • Familiarity with fault-isolation techniques such as EMMI, IR thermography/LIT, microprobing, TDR, ATE, SEM/EDS, X-ray, or FIB.
  • Experience with Cadence, SPICE, MATLAB, Python, or LabVIEW, and with analyzing data and preparing technical reports.

Work Environment & Expectations

  • This is a fully onsite lab role in Sunnyvale, CA
  • Work involves operating lab equipment, handling chemicals/materials, and following safety protocols
  • Schedule may adjust based on priority turnaround times and customer commitments
  • Must be able to coordinate with team members to manage workload and meet deadlines

We encourage you to apply even if your experience is not a 100% match with the position. We are looking for someone with relevant skills and experience, not a checklist that exactly matches the job description. We want to help you grow and in return, you help us grow into a stronger, more inclusive organization.

Physical Requirements

  • Ability to continuously operate a personal computer or lab equipment for extended periods (4+ hours).
  • Ability to operate a keyboard and other lab equipment, use a telephone, access file cabinets and other items stored at various levels, including overhead.
  • Must be able to remain in a stationary position 80% of the time.
  • Ability to communicate clearly and understandably in normal conversational distance, over the telephone, and in group settings.
  • Ability to handle small and fragile devices with tweezers and/or fingers.
  • Require close-distance visual acuity with or without correction (glasses, contacts, etc.).
  • Must be willing and able to wear PPE such as respirator, hard-hat, steel-toed shoes, safety glasses, laboratory coat, and other required devices or equipment.
  • Ability to learn new tasks, remember processes, maintain focus, complete tasks independently, and make timely decisions in workflow contexts.
  • Ability to move equipment or items up to 50 lbs.

Additional Information

What It’s Like to Work Here:

  • Teamwork: experience what being a part of the Eurofins-EAG community feels like. Be inspired by your leaders, be encouraged by your teammates and be supported in all parts of your journey while you work with us.
  • Learning & Development: take on career development programs and goal setting to create big possibilities for your career and life. Develop within the company; be mentored and grown as a leader.
  • Diversity & Authenticity: we work hard to embrace diversity and inclusion and encourage everyone to bring their authentic selves to work every day.

Benefits & Perks to Foster Work/Life Balance:

✓ Medical, Dental and Vision Coverage

✓ 401k Company Matching

✓ Paid Time Off

✓ Wellness Program

✓ Education Assistance

✓ …and more!

If you enjoy being immersed in technology, tackling problems head-on, finding solutions through teamwork, and taking pride in accomplishments, join us today!

Check out our other opportunities: www.eag.com/about/careers/

Eurofins EAG Laboratories is an equal opportunity employer and prohibits discrimination, harassment, and retaliation in all of our employment practices. Eurofins EAG Laboratories recruits, hires, trains, promotes and administers all employment-related matters based on an individual's qualifications, abilities, and efforts.  Applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, citizenship status, sexual orientation, gender identity and/or expression, pregnancy, genetic information, disability, military and/or protected veteran status, and/or any other category protected by applicable federal, state, or local law.

Eurofins EAG Laboratories is a Disabled, and Veteran Equal Employment Opportunity and Affirmative Action employer

Eurofins USA Material Sciences is a Disabled and Veteran Equal Employment Opportunity employer.

Something wrong with this job? Report it · This flag looks wrong