
Electrical Hardware Design Engineer
RalliantSpartanburg, SCOn-site5+ years experiencePosted 9 days ago
Pay not listed
Looks real. 1 thing to check before you apply.
On Ralliant’s own careers site (Oracle Recruiting), checked open today.
- To check: No pay range listedAsk for the pay range before you interview.
- Checked: On the company's own careers siteOracle Recruiting board
- Checked: Checked open todayOracle Recruiting board
- Checked: No reposts foundOracle Recruiting board
- Trust score 89 / 100 · Looks good
See all 5 checksShow fewer
What you’ll do
- Own new product electronics from requirements and architecture through schematics, PCB design, prototypes, and production release.
- Design and route multilayer boards, and coordinate with fabricators and contract manufacturers on builds and production ramp-up.
- Design for safety and EMC compliance, run pre-compliance tests, and work with certification labs through certification.
- Bring up and validate boards, execute design verification and environmental testing, and troubleshoot manufacturing and field issues.
Summarised from the posting by AI and can be wrong. The full description is the source.
Requirements
Experience
- 5+ years of hands-on hardware design on industrial or similarly regulated products
- Ownership of at least two electronic products from concept through production, designed from scratch
- Direct experience taking a product through UL, CSA, and/or CE certification, including resolving safety and EMC findings with test labs
- Experience with board bring-up, debugging, lab instrumentation, and PCB/contract manufacturers
- Industrial instrumentation or sensor experience in temperature, pressure, level, flow, or weighing (preferred)
- Experience with hygienic processing environments, 3-A, EHEDG, or harsh-environment design such as washdown and IP67/IP69K (preferred)
- Experience with ATEX/IECEx, Class I Div 2, IEC 61508, or MID/NTEP (preferred)
- RF, wireless, or IoT connectivity experience with FCC/RED compliance (preferred)
- Experience leading design reviews or mentoring engineers (preferred)
Education
- BS in Electrical Engineering
- MS in Electrical Engineering (preferred)
Skills
- Personally routed multilayer PCB boards that went into production using Altium, KiCad, or similar
- Working knowledge of UL/IEC 61010-1, UL 508, IEC 62368-1, IEC 61326-1, IEC 61000-4-x, and CISPR 11
- Strong grasp of analog and mixed-signal design, microcontroller systems, power supplies and isolation, signal conditioning, and circuit protection
- Experience with 4–20 mA/HART, IO-Link, Modbus, PROFINET, or EtherNet/IP (preferred)
Other requirements
- Be ready to walk through a product designed, layouts routed, and certifications earned
Your match
Sign in and add your resume to see which of this job's requirements it shows.
Sign in to check your matchSaved to your account, encrypted. The AI that reads it doesn't keep it or train on it.
Full job description
From Ralliant’s careers site
Anderson-Negele is seeking a hands-on Electrical Hardware Design Engineer in Spartanburg, SC who has taken electronic products from a blank schematic to a certified, shipping industrial product. You will own the hardware for new hygienic sensors and measurement systems end to end: architecture, schematics, PCB layout and routing (done yourself), board bring-up, and UL, CSA, CE and EMC certification. Our products run 24/7 in food, beverage and pharmaceutical plants, so we need someone who designs for compliance from day one.
Key Responsibilities
New product design, concept to production
Show full descriptionShow less
- Own new product electronics from a clean sheet: requirements, architecture, component selection, schematics, prototypes and production release
- Design analog, mixed-signal, power and microcontroller circuits for industrial sensing (RTD/NTC, 4–20 mA, HART, industrial I/O), with simulation, worst-case analysis and derating
- Lead and participate in schematic and PCB design reviews
PCB layout and routing (hands-on ownership)
- Personally lay out and route your boards; layout is not handed off to another group or service bureau
- Own the PCB end to end: placement, stack-up, multilayer routing (mixed-signal, power, high-voltage, controlled impedance), libraries, design rules and fab/assembly outputs
- Work with fabricators and contract manufacturers on DFM, DFT, Gerber/BOM reviews, prototype builds and production ramp-up
Design for compliance and certification
- Design to UL, CSA and CE (LVD, EMC, RoHS) from the first schematic, applying UL/IEC 61010-1 safety rules (creepage, clearance, isolation, fault conditions) and IEC 61326-1 / IEC 61000-4-x immunity
- Run pre-compliance testing, work with third-party labs (UL, CSA, TÜV, Intertek) through certification, and maintain technical files and critical component lists
Validation, sustaining and collaboration
- Bring up and validate new boards using oscilloscopes, spectrum, logic and power analyzers; write and execute DVT plans, including environmental testing
- Support the manufacturing production floor as part of sustainment: be on hand to resolve build and test issues, assist with troubleshooting, and lead root cause analysis of hardware, manufacturing and field failures
- Drive reliability, cost and obsolescence redesigns while protecting existing UL/CSA/CE listings
- Work closely with mechanical, firmware, manufacturing, quality and product management, and communicate design intent to vendors and certification bodies
Required Qualifications
- BS in Electrical Engineering (MS preferred) and 5+ years of hands-on hardware design on industrial or similarly regulated products
- Proven ownership of at least two electronic products from concept through production, designed from scratch rather than modified
- Hands-on PCB layout and routing: you have personally routed multilayer boards that went into production (Altium, KiCad or similar)
- Direct experience taking a product through UL, CSA and/or CE certification, including resolving safety and EMC findings with test labs
- Working knowledge of safety (UL/IEC 61010-1, UL 508, IEC 62368-1) and EMC (IEC 61326-1, IEC 61000-4-x, CISPR 11) standards
- Strong grasp of analog and mixed-signal design, microcontroller systems, power supplies and isolation, signal conditioning, and circuit protection (ESD, surge, transients)
- Experience with board bring-up, debugging, lab instrumentation, and PCB/contract manufacturers
- Be ready to walk us through a product you designed, layouts you routed, and the certifications it earned
Preferred Qualifications
- Industrial instrumentation or sensor experience (temperature, pressure, level, flow, weighing)
- Industrial protocols: 4–20 mA/HART, IO-Link, Modbus, PROFINET or EtherNet/IP
- Hygienic processing environments (food, beverage, pharma; 3-A, EHEDG) and harsh[1]environment design (washdown, IP67/IP69K)
- Hazardous location (ATEX/IECEx, Class I Div 2), functional safety (IEC 61508), or MID/NTEP experience
- RF, wireless or IoT connectivity with FCC/RED compliance
- Experience leading design reviews or mentoring engineers
#LI-MW1
Something wrong with this job? Report it · This flag looks wrong