Engineering jobs

Senior Laser Engineer

Xcimer EnergyDenver, COFull-timeOn-sitePosted 4 days ago

$155k–$200k/yr listed by the employer

Key facts

Experience
8+ years
Degree
Master's degree or equivalent
US visa
No US visa sponsorship

Looks real and checked open today.

On Xcimer Energy’s own careers site (Lever).

Trust score ready Nov 25

  • Checked: On the company's own careers siteLever board
  • Checked: Checked open todayLever board
  • Checked: Pay listedJob posting
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 25
See all 4 checksShow fewer
How we check

What you’ll do

  • Design laser subsystems and model performance, beam propagation, tolerances, and sensitivities to refine hardware requirements.
  • Translate laboratory laser prototypes into production-ready systems, addressing reliability, scalability, manufacturability, alignment, maintenance, and diagnostics.
  • Lead design reviews, integration, alignment, commissioning, and characterization; define test plans and acceptance criteria.
  • Drive engineering changes, nonconformance resolution, and root-cause investigations with design, supplier, and manufacturing teams.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 8+ years designing, building, and testing laser systems, or equivalent combination of education and experience
  • Hands-on experience with pulsed diode-pumped solid-state lasers, including amplifiers, pulse building resonators, laser-induced damage, gain dynamics, and thermal lensing
  • Experience modeling and simulating laser and optical systems using commercial tools such as Zemax, FRED, or COMSOL, and computational tools such as Python or MATLAB
  • Demonstrated experience productizing laser systems, focused on reliability, scalability, supply chains, repeatability, manufacturability, and operability
  • Demonstrated knowledge of auxiliary systems design, such as cooling, timing, triggering, or vacuum
  • Experience in nonlinear optical conversion, such as SHG or THG
  • Experience in an industry setting within a matrixed organization, and experience leading or participating in formal system design review processes (preferred)
  • Working knowledge of quality and configuration-control processes, including RCCAs, NCRs, and ECOs (preferred)
  • Experience with high-energy or high-average-power laser systems, deep-UV optics, or nonlinear optical systems (preferred)
  • Experience with STOP (structural, thermal, optical performance) analysis for laser components and optics (preferred)
  • Familiarity with pulsed power, gas handling, vacuum, or active beam control subsystems, including adaptive optics, pointing, and alignment (preferred)
  • Experience with CAD software, laser safety practices, and test automation or data acquisition (preferred)
  • Experience taking a laser product through scale-up with a contract manufacturer or internal manufacturing team, including requirements generation, SCD development, and cost/resource estimation (preferred)

Education

  • M.S. degree in physics, optics, electrical engineering, or a related field
  • Ph.D. in physics, optics, electrical engineering, or a related field (preferred)

Other requirements

  • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Xcimer Energy’s careers site

Responsibilities

Show full descriptionShow less
  • Own subsystem design, performance, and productization, applying first-principles system calculations (gain, extraction, energy and power scaling, thermal loading, damage thresholds, beam quality) from detailed design through build and test. - Develop and maintain models of laser performance and beam propagation using tools such as Zemax, FRED, COMSOL, Python, and MATLAB; use them to run trade studies, tolerance and sensitivity analyses, and to set and refine hardware requirements. - Lead and contribute to system design reviews (concept, preliminary, critical, test readiness, etc.), driving clear requirements, interface definitions, and risk and design-margin assessments across a matrixed team. - Translate prototype and laboratory laser designs into production-ready systems that meet targets for reliability, scalability, repeatability, manufacturability, and operability, including design for assembly, alignment, maintenance, and diagnostics. - Drive engineering change and quality processes: author and disposition Engineering Change Orders (ECOs), Nonconformance Reports (NCRs), and Root Cause and Corrective Action (RCCA) investigations, and close the loop with design, supplier, and manufacturing teams. - Plan and lead integration, alignment, commissioning, and characterization campaigns; define test plans, acceptance criteria, and data analysis methods, and capture lessons learned in procedures and best practices. - Work with Laser Science, Theory/Computation, Optical Engineering, Mechanical Engineering, Pulsed Power, Controls, Software, and Manufacturing to ensure the laser architecture and its models stay consistent with the hardware as it is built. - Source and qualify laser components and subsystems and build and maintain strategic supplier relationships that support the program roadmap. - Mentor junior engineers and scientists, and help establish documentation, design, and review practices that scale as the team grows.

Qualifications

  • Education: M.S. degree in physics, optics, electrical engineering, or a related field. - Experience: 8+ years of experience designing, building, and testing laser systems (or equivalent combination of education and experience). - Hands-on experience with pulsed diode-pumped solid-state lasers (e.g. Nd:YAG, Nd:YLF, Nd:YVO4, Yb:YLF, Ti:Sa, etc.) including work with amplifiers, pulse building resonators, laser induced damage, gain dynamics, and thermal lensing - Experience with modeling and simulation of laser and optical systems using commercial tools (e.g., Zemax, FRED, COMSOL, etc.) and computational tools (Python or MATLAB). - Demonstrated experience productizing laser systems, with a focus on reliability, scalability, supply chains, repeatability, and manufacturability/operability. - Demonstrated knowledge of relevant auxiliary systems design (e.g. cooling, timing, triggering, vacuum, etc.) - Strong communication skills, including documentation of technical results and presenting at design reviews. - Experience in non-linear optical conversion (SHG, THG, etc.) - Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Desired

  • Ph.D. in physics, optics, electrical engineering, or a related field. - Experience in an industry setting within a matrixed organization, and experience leading or participating in formal system design review processes. - Working knowledge of quality and configuration-control processes, including RCCAs, NCRs, and ECOs. - Experience with high-energy or high-average-power laser systems, deep-UV optics, or nonlinear optical systems. - Experience with STOP (structural, thermal, optical performance) analysis for laser components and optics. - Familiarity with pulsed power, gas handling, vacuum, or active beam control (adaptive optics, pointing, and alignment) subsystems. - Experience with CAD software, laser safety practices, and test automation or data acquisition. - Experience taking a laser product through scale-up with a contract manufacturer or internal manufacturing team, including requirements generation, SCD development, and cost/resource estimation.

Something wrong with this job? Report it

Similar jobs

Senior Bridge Engineer

Michael Baker International · Denver, CO

$111k–$190k/yrHybrid

StrongChecked open todayPosted 11 days ago

Commissioning Engineer II

BEUMER Group · Denver, CO

$105k–$115k/yrFull-timeHybrid

StrongChecked open todayPosted 8 days ago

See more like this