Supply Chain Manager jobs

Global Supply Manager (EPC)

SpaceXStarbase, TX +1 placeOn-sitePosted 2 days ago

Pay not listed

Key facts

Where
Starbase, TX · Brownsville, TX · on-site
Experience
10+ years
Degree
Bachelor's degree

Looks real and checked open today.

On SpaceX’s own careers site (Greenhouse).

Trust score ready Nov 27

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 27
See all 4 checksShow fewer
How we check

What you’ll do

  • Develop category sourcing strategies and lead procurement for power-generation and electrical equipment, EPC scopes, and related services.
  • Align equipment sourcing, contract scope, interfaces, and schedules with engineering, construction, installation, and commissioning requirements.
  • Negotiate and manage supplier contracts, costs, warranties, performance obligations, and supply-risk plans.
  • Coordinate procurement through bid evaluation, delivery, installation, commissioning, performance testing, and project handover.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Advanced degree and 4+ years of experience in engineering, purchasing, contract negotiation, material or production planning, operations or supply chain management, or material cost control
  • Bachelor’s degree and 6+ years of experience in engineering, purchasing, contract negotiation, material or production planning, operations or supply chain management, or material cost control
  • 10+ years of experience in engineering, purchasing, contract negotiation, material or production planning, operations or supply chain management, or material cost control
  • Hands-on EPC delivery experience with power plants or large generation projects, from design development and major-equipment procurement through construction, commissioning, and commercial operation或手 (preferred)
  • Experience explaining power-plant equipment, balance of plant, electrical interconnection, emissions controls, construction sequence, and startup logic and translating these into sourcing and contract (preferred)
  • Experience sourcing gas turbines, turbine-generator packages, balance-of-plant equipment, and/or SCR systems (preferred)
  • Experience procuring generators, switchgear, transformers, UPS, and related electrical balance-of-plant for large facilities (preferred)
  • Capital-project procurement experience, including RFPs, bid tabs, terms and conditions, FAT/SAT, installation coordination, commissioning support, and stakeholder coordination (preferred)
  • Strong TCO analysis, supply-risk mitigation, dual sourcing, and continuity-of-supply experience for critical production or power assets (preferred)
  • Supplier scorecards, quality and compliance programs, and logistics optimization involving lead time, inventory, and safety stock, with measurable cost and service results (preferred)
  • Experience negotiating complex commercial agreements covering pricing, escalation, liquidated damages, warranties, IP, export control, and long-term supply (preferred)
  • Technical procurement, manufacturing, or design background on production or power equipment (preferred)

Skills

  • Working knowledge of gas-turbine OEMs, long-lead capital equipment, spare parts, aftermarket, and LTSA, O&M, overhaul, and field-service agreements (preferred)
  • Understanding of gas-turbine and SCR technical drivers, including output, heat rate, availability, NOx/CO, catalyst life, and reagent consumption (preferred)
  • Ability to read technical drawings, specifications, P&IDs, and quality documentation and align sourcing with engineering intent and construction requirements (preferred)
  • Knowledge of ASME, API, ISO, environmental and air-permit constraints, and ITAR/EAR as applicable (preferred)
  • Experience using MS Office, SQL, and Power BI (preferred)

Other requirements

  • Must be able to travel for business needs, including supplier, fabrication, and site visits; up to 50% travel may be required, including international travel
  • Must be able to work extended hours and/or weekends as needed
  • Must be based in Starbase, TX; onsite work is required and remote work is not considered
  • Must be a U.S. citizen or national, U.S. lawful permanent resident, refugee, or asylee, or be eligible to obtain required U.S. Department of State authorizations

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From SpaceX’s careers site

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

GLOBAL SUPPLY MANAGER (EPC)

Show full descriptionShow less

The SpaceX supply chain department enables the company’s mission by building an agile, robust supply chain that supports aggressive growth. Functions include procurement, planning and fulfillment, supplier development and quality, logistics, and inventory. This role supports fuel and gas supply, capital purchases, and projects for production, test, and launch organizations, with a focus on power-generation and electrical capital equipment for large facilities.

This manager owns category strategy for power plants delivered through an engineering, procurement, and construction (EPC) model: design, equipment supply, installation, and commissioning of generation assets that can actually be built, started up, and operated. The person must understand how a power plant is put together — from concept and specification through mechanical completion, commissioning, and handover — and translate that into sourcing, contracts, cost, schedule, and supply risk.

RESPONSIBILITIES

  • Create sourcing strategies for assigned categories that reduce risk and hit purchasing targets for payment terms, cash, and cost savings, including multi-year EPC and equipment packages.
  • Develop and maintain key internal relationships (engineering, facilities, construction, test, launch, and operations) so sourcing models match how the plant will be designed, built, installed, and commissioned.
  • Lead procurement for power-generation and electrical capital equipment and related balance-of-plant: generators, gas turbines and turbine-generator packages, switchgear, transformers, UPS, SCR and reagent systems, and supporting infrastructure. Run RFP/RFQ, total cost of ownership, and competitive bidding on multi-million-dollar CAPEX and EPC scopes.
  • Structure buys the way a plant is built: engineering deliverables, long-lead equipment, construction and installation packages, and commissioning/startup support. Align scope splits, interfaces, and responsibilities across OEM, EPC contractor, fabricators, and specialty suppliers.
  • Drive design-to-procure alignment. Read and apply specifications, drawings, P&IDs, one-lines, and quality documents so purchased equipment matches engineering intent, site constraints, and permit limits (output, heat rate, availability, NOx/CO, catalyst life, reagent use).
  • Support the full project sequence: bid evaluation, terms and conditions, FAT/SAT, logistics and site delivery, installation interfaces, mechanical completion, pre-commissioning, commissioning, and performance testing. Coordinate with engineering, construction, and operations through handover.
  • Create contract documents with Legal and manage them so suppliers meet scope, schedule, quality, warranty, and performance obligations. Understand how contracts interact (supply, installation, LTSA/O&M, liquidated damages, escalation, IP, export control) and apply them to real project needs.
  • Negotiate to maximize value and lower risk: pricing, escalation, warranties, liquidated damages, delay consequences, spares, and long-term service, while protecting continuity of supply for critical operations.
  • Present clearly to decision makers on launch-critical and project-critical issues, including cost, lead time, technical risk, and recovery plans.
  • Communicate and drive compliance to category strategies. Establish preferred suppliers and dual-source or alternate paths where single-source risk is unacceptable.
  • Identify and execute cost-reduction work: plan it, coordinate stakeholders, estimate completion, and report status. Drive year-over-year cost optimization by cutting usage and eliminating waste, not only by unit-price pressure.
  • Perform quantitative and process analysis of financial impact, TCO, and category performance (equipment, installation, commissioning, spares, and lifecycle service).
  • Define SLAs and KPIs with stakeholders and measure delivery of business results, cost, quality, schedule, and commissioning readiness. Run supplier scorecards and continuous-improvement programs.
  • Research, benchmark, and analyze markets for gas turbines, electrical BOP, SCR, and EPC capacity, including OEM landscape, long-lead equipment, aftermarket, and service agreements (LTSA, O&M, overhaul, field service).
  • Place purchase orders, clear blocked invoices, and reduce transaction count for assigned categories.
  • Manage supply risk, lead time, inventory, and safety stock for turbine, electrical, and SCR products so construction and commissioning are not stopped by missing equipment or spares.

BASIC QUALIFICATIONS

Advanced degree and 4+ years in one or more of the following; or bachelor’s degree and 6+ years; or 10+ years in one or more of the following:

  • Engineering
  • Purchasing
  • Contract negotiation
  • Material or production planning
  • Operations or supply chain management
  • Material cost control

PREFERRED SKILLS AND EXPEREINCE

  • Hands-on experience with EPC delivery of power plants or large generation projects: design development, procurement of major equipment, construction/installation, and commissioning through commercial operation or handover.
  • Proven ability to explain and manage how a power plant is built up: major equipment, BOP, electrical interconnection, emissions controls, construction sequence, and startup logic — and to turn that into a sourcing and contracting plan.
  • Experience sourcing gas turbines, turbine-generator packages, BOP, and/or SCR systems (catalyst, ammonia/urea reagent systems, injection skids, and related emissions equipment).
  • Experience procuring generators, switchgear, transformers, UPS, and related electrical BOP for large facilities, ideally in energy, industrial, or heavy manufacturing.
  • Working knowledge of the gas-turbine OEM landscape, long-lead capital equipment, spare parts and aftermarket, and service agreements (LTSA, O&M, overhaul, field service).
  • Understanding of gas-turbine and SCR technical drivers (output, heat rate, availability, NOx/CO, catalyst life, reagent consumption) and how they change total cost of ownership and plant performance guarantees.
  • Capital-project procurement: RFPs, bid tabs, T&Cs, FAT/SAT, installation coordination, commissioning support, and work with engineering, facilities, construction, test, and launch stakeholders.
  • Strong TCO analysis, supply-risk mitigation, dual sourcing, and continuity of supply for critical production or power assets.
  • Supplier scorecards, quality and compliance programs, and logistics optimization (lead time, inventory, safety stock) with measurable cost and service results.
  • Negotiation of complex commercial agreements (pricing, escalation, liquidated damages, warranties, IP, export control, long-term supply) with OEMs, EPC contractors, fabricators, and specialty suppliers.
  • Ability to read technical drawings, specifications, P&IDs, and quality documentation and align sourcing to engineering intent and construction reality.
  • Knowledge of relevant codes, quality systems, and compliance (ASME, API, ISO, environmental and air-permit constraints, ITAR/EAR as applicable).
  • Technical procurement, manufacturing, or design background on production or power equipment.
  • Track record of leadership and team building; bias for speed and impact; fast learner who can prioritize.
  • Strong analytical, organizational, written, verbal, and presentation skills. Tools such as MS Office, SQL, and Power BI.
  • Detail-oriented in a fast-changing environment. Highest ethical standards.

ADDITIONAL REQUIREMENTS

  • Must be able to travel for business needs, including supplier, fabrication, and site visits tied to installation and commissioning.
  • Must be able to travel - up to 50% work week travel may be required, including international travel
  • Must be able to work extended hours and/or weekends as needed.
  • Based in Starbase, TX. Onsite required; remote work is not considered.

ITAR REQUIREMENTS:

  • To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to EEOCompliance@spacex.com.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs in Texas

Supply Chain Manager

Efficient Computer · Bay Area, CA +3 places

$110k–$160k/yr

StrongChecked open todayPosted 1 month ago

Supply Chain Manager

Foxconn Industrial Internet · Houston, TX

Full-timeOn-site

StrongPay not listedChecked open todayPosted 21 days ago

Transcon Manager

Expeditors · Laredo, TX

Full-timeOn-site

StrongPay not listedChecked open todayPosted 18 days ago

Procurement Manager

Panelmatic · Conroe, TX

Full-timeOn-site

StrongPay not listedChecked open todayPosted 24 days ago

See more like this