Software Engineer jobs

Senior/Staff Software Engineer, Robotic Applications

Atomic Machinesor Santa Clara, CA +1 placePosted 1 month ago

$170k–$230k/yr listed by the employer

Above the typical $177k a year for mid-level Software Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 469 mid-level Software Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Where
or Santa Clara, CA · Emeryville or Santa Clara
Degree
Bachelor's degree or equivalent

Strong: looks real and checked open today.

On Atomic Machines’ own careers site (Greenhouse).

  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Design and implement machine behavior, including automation sequences, state machines, failure detection and recovery, and node APIs.
  • Build simulators, mocks, and conformance tests to validate sequencing, timing, and recovery in CI.
  • Optimize manufacturing cycle time by instrumenting and restructuring motion, vision, and process steps.
  • Bring up hardware and develop calibration, verification, and diagnostic tools; debug failures across software and hardware.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3+ years developing software for systems that interact with hardware or the physical world
  • Depth on at least one system you built, including what you wrote, why you chose the design, what broke, and how you found it
  • Experience bringing up and integrating electromechanical systems (sensors, actuators, motion axes) in production environments (preferred)
  • Robotics depth in kinematics, motion planning, vision-based alignment, or calibration (hand-eye, kinematic, galvo scan-field), with a track record of landing it in shipped systems (preferred)
  • Experience with hardware-in-the-loop test design, observability, or simulation and digital-twin validation beyond unit-level mocks (preferred)
  • Real-time or embedded experience (preferred)

Education

  • BS in CS, Computer Engineering, EE, or Robotics, or equivalent experience

Skills

  • Strong programming fundamentals and fluent Python
  • Practical understanding of state machines, sequencing, and failure modes in systems where software drives physical hardware
  • Systematic debugging habits, starting from the symptom and reaching the mechanism
  • Working fluency in a systems language such as C++, Rust, or Go (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Equity
Equity compensation

Full job description

From Atomic Machines’ careers site

Atomic Machines is building the Matter Compiler™, the first in a new class of AI-native, all-digital manufacturing systems that build working machines directly from code. The Matter Compiler (MC) is aimed at micro-machines: motors and gears the size of a grain of sand, robots small enough to work inside the body, cooling built directly into the chips that run AI, and the many devices like them that have been waiting on a way to build them. Its first product is PrimeSwitch™, an electromechanical power relay the size of a button battery that carries 150 amps continuous current and opens in 50 microseconds, about a thousand times faster than a conventional contactor. Founded by Jeff Holden — serial entrepreneur, ex-Amazon SVP and Uber’s first Chief Product Officer — the company has raised $250 million to date.

Show full descriptionShow less

Atomic Machines is based in the San Francisco Bay Area, with offices in Emeryville and Santa Clara.

About The Role:

Our manufacturing system is composed of nodes; each delivers a unit of manufacturing capacity for a process, and there are a dozen or more node types. As a Software Engineer, Robotic Applications, you will bring nodes to life: designing the automation sequences, state machines, and APIs that turn integrated hardware into reliable, repeatable manufacturing capacity. Your deliverable is software, mainly Python, in the application layers of our stack: the APIs that wrap a node to automate manufacturing processes, the orchestration that sequences motion, vision, and process steps for throughput, and the calibration and diagnostic tooling that lets us replicate nodes and keep them healthy.

You will work shoulder to shoulder with mechanical, electrical, and process engineers through bring-up: one week defining machine behavior with a mechanical designer, the next chasing cycle time out of a motion sequence or root-causing a failure that crosses the software/hardware boundary. You can try code on the machine in the morning and land it as a tested, typed package through CI in the afternoon.

What You’ll Do:

  • Design and implement machine behavior: automation sequencing, state machines, failure detection and recovery, and the APIs that expose it all.
  • Write code that makes unsafe commands impossible rather than merely discouraged: enforce invariants, validate before touching hardware, and leave the machine in a known state on every exit path.
  • Ship a simulator or mock with every device, test sequencing, timing, and recovery without the machine, and extend the conformance suite every machine runs in CI.
  • Optimize cycle time: instrument sequences, find where time goes, and overlap or restructure motion/vision/process steps to get it back.
  • Bring up new hardware with cross-functional teams, and build the calibration, verification, and diagnostic tools that make the next copy of a machine faster to stand up.
  • Debug across the stack: from a misbehaving sensor or homing failure up through orchestration logic, using logs, telemetry, and the machine itself.
  • Contribute to system reliability through observability that shows a machine degrading before it stops, fault handling, and graceful recovery, so machines run without babysitting.
  • Take a turn on the on-call rotation: periodically a one-week shift that includes the weekend (about once every 10 weeks; less frequently as the company grows and eventually transitioning to dedicated support teams).
  • Current coverage slots are 6am–2pm or 2pm–10pm, and you will not be expected to work beyond the shift for those days.

What You’ll Need:

  • 3+ years developing software for systems that interact with hardware or the physical world (level set by experience and interview performance
  • Depth on something you built: at least one system you can take us two layers down into, what you wrote, why that design, what broke, and how you found it.
  • Strong programming fundamentals and fluent Python: you will write and debug Python every day, and every coding exercise in our interview is in Python. If your strongest language is something else, you are welcome if you can work in Python live; it does not need to be polished.
  • A first-principles mindset: you reason about why a design works, not just how you've seen it done.
  • Practical understanding of state machines, sequencing, and failure modes in systems where software drives physical hardware: what is legal from the current state, what must still hold when a step fails halfway, and why an operation that may be retried must be safe to repeat.
  • Systematic debugging habits, starting from the symptom and reaching the mechanism, and the collaboration skills to chase problems across the software/electrical/mechanical boundary.
  • BS in CS, Computer Engineering, EE, Robotics, or equivalent experience.

Bonus Points For:

  • Experience bringing up and integrating electromechanical systems (sensors, actuators, motion axes) in production environments.
  • Working fluency in a systems language (C++, Rust, Go); our motion stack is C++, and it helps to read it.
  • Robotics depth where this job uses it: kinematics, motion planning, vision-based alignment, calibration (hand-eye, kinematic, galvo scan-field), and a track record of landing it in shipped systems.
  • Experience with hardware-in-the-loop test design, observability, or simulation and digital-twin validation beyond unit-level mocks.
  • Real-time or embedded experience (valuable on adjacent teams; not required here).

The compensation for this position also includes equity and benefits.

Salary Range

$170,000—$230,000 USD

Atomic Machines is an equal opportunity employer that values diversity and does not discriminate based on characteristics protected by applicable law. We are committed to an inclusive interview experience, including for individuals with disabilities. To request an accommodation, contact rc@atomicmachines.com. To help our recruiting team manage application volume and respond to candidates more efficiently, Atomic Machines may use AI-assisted tools.

Something wrong with this job? Report it

Similar jobs in California

Staff Software Engineer

LinkedIn · Mountain View, CA

$156k–$255k/yrFull-timeHybrid

StrongChecked open todayPosted 5 days ago

Software Engineer

talentpluto · San Francisco, CA

$165k–$250k/yrFull-timeOn-site

StrongChecked open todayPosted yesterday

See more like this