Mechanical Engineer jobs

Mechanical Engineer, Ground Systems

ZiplineSouth San Francisco, CA

$125k–$240k/yr listed by the employer

Above the typical $165k a year for senior Mechanical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 309 senior Mechanical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
5+ years
Degree
Bachelor's degree

Looks real. 1 thing to check before you apply.

On Zipline’s own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 3 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 90 / 100 · Strong
See all 6 checksShow fewer
How we check

What you’ll do

  • Own mechanical and electromechanical subsystems from requirements and concept development through verification, release, production ramp, and sustaining engineering.
  • Develop system-level trade studies, CAD assemblies, drawings, manufacturing documentation, and design-review materials.
  • Plan and run verification testing, analyze results, and drive corrective actions and reliability improvements.
  • Qualify and support suppliers, partner with cross-functional teams, and resolve production or field issues.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5–10+ years of mechanical/electromechanical design engineering experience delivering complex subsystems or products through NPI into production
  • Track record owning complex subassemblies or full systems over at least 2 product programs (concept, prototype, validation, production)
  • Experience designing mechanisms and actuator systems, including selecting and integrating motors, gearboxes, bearings, linear actuators, springs, linkages, sensors, and other motion-control components
  • Experience evaluating mechanism kinematics, actuator loads, friction, efficiency, backlash, compliance, duty cycle, wear, fatigue, and life
  • Experience partnering with contract manufacturers to ramp up production of high-volume lines
  • Disciplined release and build processes, including released parts, maintained BOMs, created build SOPs, and up-to-date timelines
  • Experience designing autonomous machinery, robotics, industrial automation, aerospace ground equipment, material-handling systems, or other electromechanical products (preferred)
  • Experience developing custom actuators, drivetrains, latching systems, or compliant mechanisms (preferred)

Education

  • Bachelor’s degree in Mechanical Engineering or a related discipline

Skills

  • Mechanical engineering fundamentals including load estimation, structural hand calcs, FEA, material selection, clean CAD designs, and design-for-assembly/field-service practices
  • Practical knowledge of manufacturing methods such as welding, sheetmetal forming, extrusion, CNC machining, and injection molding
  • Strong CAD and documentation skills, including owning 3D assemblies and 2D detail drawings for 20–100 part systems; experience with NX, SolidWorks, or equivalent
  • NX as the primary CAD tool (preferred)

Other requirements

  • Ability to periodically travel (<10%) to visit customers and suppliers

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance.
Dental & vision
Dental and vision insurance.
Paid time off
Paid time off.
Equity
Equity compensation may be included in the total compensation package.
Bonus
May include discretionary annual or performance bonuses and sales incentives.

Full job description

From Zipline’s careers site

About Zipline

Zipline is the world’s largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world’s largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products.

Show full descriptionShow less

Our customers include the world’s largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we’ve built to enable seamless, reliable, global operations.

Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe.

We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people’s lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds.

About You and The Role

Zipline builds autonomous delivery aircraft and ground systems that operate daily in various field conditions. You will own hardware that directly affects flight safety, fleet reliability, manufacturability, and the speed at which we scale service to new regions. The Ground Systems team is responsible for all of the infrastructure that enables our Zips to take off, fly, land, charge and prepare for their next mission. Our goal is to develop elegant integration solutions that are modular, cost effective, and adaptable to both new and existing building structures and sites worldwide for a variety of customers making drone deliveries.

What You'll Do

We are looking for an experienced mechanical engineer to own the design of entire systems and subassemblies for next generation products that are unlike anything that exists today. This will include design of structural components, mechanisms, and electronics integration. As a member of our core design team, you will make important decisions about the product architecture and create designs that will enable practical scale on a short timeline that will meet high product reliability targets. You will quickly iterate and downselect based on data from your analysis and test results from your prototypes. Collaboration cross functionally will be key with electrical, software, civil, NPI and supply chain teams to bring your designs to production and into the field.

In this role you will:

  • Own the end-to-end delivery of mechanical and electromechanical subsystems, from requirements definition through concept development, design, build, verification, release, production ramp, and sustaining engineering
  • Produce and defend system-level trade studies, tolerance stacks, load paths, failure modes, and hand-calcs that bound designs for safety-critical loads and manufacturability.
  • Create CAD assemblies, detailed drawings, GD&T, and manufacturing documentation for 20–100 part assemblies; own design reviews, DFM, and first-article criteria.
  • Develop and execute verification plans (environmental, fatigue, vibration, thermal, EMI/EMC where applicable), build test rigs/fixtures, run test campaigns, analyze results, and close findings with corrective actions and measurable reliability improvements
  • Lead supplier selection, qualification, and handoff: drive DFM feedback, define inspection criteria, and reduce supplier NPI cycle time and scrap rates. Own escalation and remediation when supplier output risks field operations
  • Partner daily with Systems, Software, Production, Integration & Test, Reliability, and Field Ops to align requirements, manage trade-offs, and eliminate deployment blockers
  • Translate prototypes into designs that meet target cost, cycle time, and inspection rates for medium-volume production; own metrics for manufacturability and in-field reliability and drive them to target.
  • Serve as a technical authority in design reviews and postmortems; lead incident root-cause investigations when field events occur
  • Mentor peers and junior engineers, and raise the quality of mechanical design practices across the team.

What You'll Bring

  • 5–10+ years of mechanical/electromechanical design engineering experience delivering complex subsystems or products through NPI into production
  • Proven track record owning complex subassemblies or full systems over at least 2 product programs (concept, prototype, validation, production)
  • Strong mechanical engineering fundamentals including load estimation, structural hand calcs, FEA, material selection, clean CAD designs and design-for-assembly/field-service practices
  • Demonstrated experience designing mechanisms and actuator systems, including selection and integration of motors, gearboxes, bearings, linear actuators, springs, linkages, sensors, and other motion-control components.
  • Experience evaluating mechanism kinematics, actuator loads, friction, efficiency, backlash, compliance, duty cycle, wear, fatigue, and life.
  • Practical knowledge of manufacturing methods such as welding, sheetmetal forming, extrusion, CNC machining, injection molding, etc
  • Experience partnering with contract manufacturers to ramp up production of high volume lines ● Strong CAD and documentation skills: able to own 3D assemblies and 2D detail drawings for 20–100 part systems; experience with NX, SolidWorks, or equivalent
  • Disciplined processes: Your parts are released, BOMs are maintained, SOPs created for builds, and timelines are up-to-date
  • Excellent written, verbal, and visual communication. You know how to tailor to your audience with the right level of technical depth to be as effective as possible, including using basic tools in place of full CAD when it makes sense
  • Bachelor’s degree in Mechanical Engineering or a related discipline
  • Ability to periodically (<10%) travel to visit customers and suppliers

Nice to Have

  • NX is your primary CAD tool
  • Experience designing autonomous machinery, robotics, industrial automation, aerospace ground equipment, material-handling systems, or other electromechanical products.
  • Experience developing custom actuators, drivetrains, latching systems, or compliant mechanisms

What Else You Need To Know

The starting cash range for this role is $125,000 - $240,000. Please note that this is a target, starting cash range for a candidate who meets the minimum qualifications for this role. The final cash pay for this role will depend on a variety of factors, including a specific candidate's experience, qualifications, skills, working location, and projected impact. The total compensation package for this role may also include: equity compensation; discretionary annual or performance bonuses; sales incentives; benefits such as medical, dental and vision insurance; paid time off; and more.

We value diversity at Zipline and welcome applications from those who are traditionally underrepresented in tech. If you like the sound of this position but are not sure if you are the perfect fit, please apply!

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities.

As set forth in Zipline ’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Mechanical Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

Mechanical Engineer

The Beauty Tech Group Trading Limited · Livermore, CA

$120k–$160k/yrContractOn-site

StrongChecked open todayPosted 11 days ago

Mechanical Engineer II

Agility Robotics · Fremont, CA

$108k–$140k/yrFull-timeHybrid

StrongChecked open todayPosted 1 month ago

Mechanical Design Engineer

Skild AI · San Mateo, CA

$100k–$250k/yr · see posting

Wide pay rangeChecked open todayPosted 1 month ago

See more like this