Production Worker & Machine Operator jobs

Tube Machine Operator

WabtecHibbing, MNFull-timeOn-site

$21.00–$30.50/hr listed by the employer

Key facts

Pay per year
≈ $44k–$63k
Above the typical $47k a year for entry-level Production Worker & Machine Operator jobs in MinnesotaHow we compare

How we compare. ≈ $44k–$63k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 42 entry-level Production Worker & Machine Operator jobs in Minnesota that list pay, from the employers' own postings. About means within 5%.

Schedule
Rotating shifts
Experience
1+ years
US visa
No US visa sponsorship

Looks real. 1 thing to check before you apply.

On Wabtec’s own careers site (SmartRecruiters), checked open today.

  • To check: Posted by the employer 5 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteSmartRecruiters board
  • Checked: Checked open todaySmartRecruiters board
  • Checked: Pay range listedJob posting
  • Checked: No reposts foundSmartRecruiters board
  • Trust score 90 / 100 · Strong
See all 6 checksShow fewer
How we check

What you’ll do

  • Set up and operate tube machines to produce completed tubes, including RTTS and aluminum tube machines.
  • Assemble tubes with gilling, run them through the strip solder machine, and inspect parts from solder lines.
  • Perform light machine maintenance and complete production forms.
  • Assist with training other operators and support other production areas as qualified.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 1 year of work experience
  • 1 year of experience in manufacturing or a similar field (preferred)
  • Experience in Lean Manufacturing (preferred)

Education

  • High school diploma or GED

Skills

  • Basic math skills
  • Ability to learn to use calipers, a tape measure, and micrometers
  • General computer skills for looking up specifications and job orders and clocking in
  • Understand how mechanical components work and fit together
  • Ability to communicate effectively and clearly in English, in writing and verbally
  • Knowledge of Epicor or a similar ERP system (preferred)

On the job

  • Lift a minimum of 50 lbs
  • Stand on concrete for 8–10 hours
  • Work in high-heat conditions
Show 2 moreShow less
  • Wear required PPE, including earplugs, protective eyewear, steel-toed boots, and a work-provided uniform
  • Manual dexterity

Other requirements

  • 18 years or older
  • Willingness to learn new tasks

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Health benefits are offered; details are available at mywabtecbenefits.com.
Retirement plan
Retirement benefits are offered; details are available at mywabtecbenefits.com.
Bonus
Performance bonus; eligibility may apply.
Other
Welfare benefits are offered; details are available at mywabtecbenefits.com.

Full job description

From Wabtec’s careers site

Job Description

Who will you be working with?

L&M Radiator, Inc. is a global designer, manufacturer, and distributor of MESABI cooling and heat transfer solutions that are custom-made for heavy equipment in the mining, oil, gas, construction and heavy industrial industries. We are looking for an individual to join our Tubing team. As a Tube Machine Operator, you will work directly with other tubers and tubing supervisors on a daily basis to ensure production goals are met. This position works directly with other tubers, the tubing supervisors, Assembly, Research & Development, and the Production Manager when necessary.

How will you make a difference?

Show full descriptionShow less

As a member of the Tubing team, you will be responsible for manufacturing, producing, assembling, and inspecting tubes on the solder line. You will also be responsible for filling out and maintaining appropriate forms to support production. This role is unique as it is part of what makes our product unique and stand out in the Heat Transfer market. In this role, you may also observe, guide, and assist with training. We are looking for individuals of all skill levels. We will train you! This position reports directly to the Tubing Supervisor.

This position rotates shifts every other week on days and afternoons. Day shift operates Monday through Friday 6:00am - 2:00pm. Afternoon operates Monday through Friday 2:00pm - 10:00pm. OT is possible depending on production needs.

What do we want to know about you?

  • 18 years or older.
  • High school diploma or GED with 1 year of work experience.

What will your typical day look like?

  • Set-up and operate the tube machine to produce a completed tube.
  • Assemble tube with gilling and place in the strip solder machine.
  • Inspect and remove parts from solder lines and listen for loose gilling.
  • Perform light maintenance on the machines.
  • Assist in training others on the tube machine.
  • Follow all appropriate work instructions.
  • Set-up and operate RTTS and aluminum tube machine.
  • Assist in other areas of production as needed and qualified.
  • Perform work in a safe manner and follow all safety guidelines and procedures.
  • Domestic and international travel possible travel depending on the project.
  • Perform related work and other duties as required by supervisor.

What about the physical demands of the job?

  • Wear correct PPE – earplugs, protective eye wear, steel-toed boots, and work provided uniform (gloves when necessary).
  • Lift a minimum of 50lbs.
  • Stand on concrete for 8-10 hours.
  • Work in high heat conditions.
  • Practice and maintain safe work conditions.

Knowledge, Skills and Abilities Required for Entry Level:

  • Regular and reliable attendance.
  • Basic math skills required, ability to learn how to use calipers, tape measure, and micrometers essential.
  • General computer skills are needed for looking up specs, job orders and clocking in.
  • Understand how mechanical components work and fit together.
  • Ability to communicate, in English, effectively and clearly by both written and verbal means.
  • Willingness to learn new tasks.
  • Manual dexterity based on past experiences.
  • Ability to pass a pre-employment written math test, physical, drug and background test.

Preferred Qualifications:

  • 1 year of experience in manufacturing or similar field.
  • Knowledge of Epicor or similar ERP system.
  • Experience in Lean Manufacturing.

You may also be asked to perform other duties outside of your function or trade, for which adequate training will be provided if necessary.

This role is also eligible for a performance bonus.

More information on offered benefits, which include health, welfare, and retirement, is available at mywabtecbenefits.com.

Wabtec will only employ those who are legally authorized to work in the U.S. for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen and fitness for duty test.

The hourly range for this role is between $21.00 - $30.50. The actual hourly rate offered to a candidate may be influenced by a variety of factors, such as training, transferable skills, work experience, education, business needs, market demands, and work location. The base pay range is subject to change and may be modified in the future.

Additional Information

Our job titles may span more than one career level. The salary rate for this role is currently $21.00 - $30.50. The actual salary offered to a candidate may be influenced by a variety of factors, such as: training, transferable skills, work experience, education, business needs, market demands and work location. The base pay range is subject to change and may be modified in the future. More information on offered benefits, which include health, welfare, and retirement, are available at mywabtecbenefits.com. Other benefit offerings for this role may include annual bonus, if eligible.

What could you accomplish in a place that puts People First?

At Wabtec, it’s not just about a job - it’s about the impact you make. When our people come together, we’re Expanding the Possible by continuously improving what we do and how we do it - for our clients and each other.

If you’re ready to revolutionize how the world moves for future generations, Wabtec is the place for you.

Who are we?

Wabtec is a leading global provider of equipment, systems, digital solutions, and value-added services for the freight and transit rail sectors. Drawing on more than 150 years of experience, we are leading the way in safety, efficiency, reliability, innovation, and productivity. Whether it’s freight, transit, ports, logistics, mining, industrial, or marine, our expertise, technologies, and people together – are accelerating the future of transportation. With roots that date back to George Westinghouse, Thomas Edison, and Louis Faiveley, Wabtec has always built technologies and implemented solutions for a variety of sectors that are critical to meeting the needs of customers and governments alike.

Our global team of about 30,000 employees worldwide delivers performance that moves the world forward. We’re lifelong learners, obsessed with better. Learn more at www.WabtecCorp.com.

Culture powers us and the possibilities.

We believe the best ideas come from a mix of experiences and backgrounds. At Wabtec, we strive every day to create a place where everyone belongs. We’re building a culture where leadership, inclusion and your unique perspective fuel progress.

Need accommodation? Just let us know - we’ve got you.

We’re proud to be an Equal Opportunity Employer. We welcome talent of all backgrounds, experiences, and identities, including race, gender, age, disability, veteran status and more.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs in Minnesota

Machine Operator

Carlisle · Lester Prairie, MN

$18/hrFull-timeOn-site

StrongChecked open todayPosted 9 days ago

Digital Press Operator

Vomela · Saint Paul, MN

$21–$25/hrFull-timeOn-site

StrongLast seen open yesterdayPosted 17 days ago

Light Equipment Operator 2

RR Donnelley · Oakdale, MN

$18.66–$26.65/hrFull-timeOn-site

StrongChecked open todayPosted 29 days ago

See more like this