Welder & Fabricator jobs

Welder 1st Shift

Cornerstone Building BrandsCity of Atwater, CAFull-timeOn-sitePosted 15 days ago

$23/hr listed by the employer

Key facts

Pay per year
≈ $48k
Below the typical $68k a year for Welder & Fabricator jobs in California (all levels)How we compare

How we compare. ≈ $48k assumes full-time hours, 2,080 a year. Typical is the median yearly pay of 43 Welder & Fabricator jobs in California (all levels) that list pay, from the employers' own postings. About means within 5%.

Schedule
1st shift, 30+ hours a week
Experience
1+ years

This job is closed.

The employer took it down 8 days ago, after 12 days open. Here are similar open jobs.

  • To check: Reposted 2 times since October 2026Reposted jobs are sometimes not being filled right now. Ask how long it has been open.
  • Checked: On the company's own careers siteSmartRecruiters board
  • Checked: Pay listedJob posting
  • Note: Last seen open 13 days agoLive check
  • Trust score 70 / 100 · Looks good
Posting history
  1. Posted Oct 31, 2026 · taken down Nov 5, 2026
  2. Reposted #1 Oct 31, 2026 · taken down Nov 5, 2026
  3. Reposted #2 Nov 5, 2026 · taken down Nov 13, 2026
See all 5 checksShow fewer
How we check

Similar open jobs

Orbital Welder

ICHOR · Fremont, CA

$24.09–$40.96/hrOn-site

StrongChecked open todayPosted 1 month ago

Welder

Anduril · Santa Ana, CA +1 place

$68k–$90k/yrOn-site

StrongOpen 4 monthsChecked open todayPosted 4 months ago

Welder I

StandardAero · Stockton, CA

$33–$40/hrOn-site

StrongOpen 5 monthsChecked open todayPosted 5 months ago

TIG Welder

ICHOR · Fremont, CA

$24.09–$40.96/hrOn-site

StrongChecked open todayPosted 1 month ago

Senior Welder

Valar Atomics · Torrance, CA

$35–$50/hrOn-site

StrongOpen 2 monthsChecked open todayPosted 2 months ago

TIG Welder (Starship)

SpaceX · Hawthorne, CA

$23–$27/hrOn-site

StrongOpen 4 monthsChecked open todayPosted 4 months ago

See more like this

What you’ll do

  • Perform MIG welding on structural steel parts and assemblies, including thin-gauge, painted, or galvanized material.
  • Adjust welder settings, gun speed and travel, and gas flow based on weld bead condition; maintain specified bead shape, size, and penetration.
  • Inspect welds and determine adjustments or repairs needed for pinholes and burn-through.
  • Read blueprints and measurements, maintain correct part sequences, and operate lifting equipment.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Ability to obtain and maintain CWB and AWS welding certification in accordance with company welding procedures

Experience

  • A minimum of one year of experience welding in a production environment or a valid welding certification
  • Experience with forklift and/or overhead crane operation (preferred)

Skills

  • Ability to read blueprints and drawings
  • Comfort and familiarity with power hand tools
  • Willingness to train, certify, and operate a forklift and overhead crane
  • General mathematical knowledge and proficiency with basic measuring instruments

Other requirements

  • Ability to work effectively to meet deadlines
  • Must be at least 18 years of age

Benefits

Health insurance
Medical benefits starting day 1 for full-time team members, Flexible spending account (FSA)
Dental & vision
Dental and vision benefits starting day 1 for full-time team members
Retirement plan
401(k)
Paid time off
PTO and paid holidays
Learning & tuition
Tuition reimbursement, training, and professional development
Wellness & mental health
Employee assistance program (EAP) and discount programs
Life & disability insurance
Life insurance, long-term disability (LTD), and short-term disability (STD)

Full job description

From Cornerstone Building Brands’ careers site

Company Description

Show full descriptionShow less

Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at http://cornerstonebuildingbrands.com.

Job Description

JOB DETAILS

Pay: $23.00 per hour

Shift: Monday - Friday - 6:00 AM - 2:30 PM, hours may vary depending on operations

This position sits within our Fortify Building Solutions business, which serves the pre-engineered metal buildings, metal roof and wall systems, and steel building components industry.

Duties and Responsibilities

This position engages in the full scope of MIG weld processes on a variety of structural steel including (but not limited to) rigid frame columns, rafters, pipe, beam canopy rafters, small parts, clips, and special assemblies. Welded parts may include thin gauge, painted, or galvanized material. The ideal candidate will have a thorough knowledge of welding techniques and have a high attention to detail in a fast-paced production environment.

  • Knows and understands all safety rules and precautions necessary for working in and about a manufacturing environment
  • Responsible for coordination of welder settings, gun speed/travel and gas flow with observed condition of bead
  • Ability to read a tape measure and blue prints to shop standard
  • Ability to decide when adjustment or gun manipulation needs to be altered
  • Ability to decide how much and what repairs to make for pin holes and burn through caused by auto welder
  • Ability to train and teach proper welding procedures in accordance with manufacturing job procedures
  • Ability to operate overhead crane and other lifting equipment
  • Responsible for holding bead to specified shape, size and penetrations while maintain the quality of the product
  • Responsible for keeping numerical and alphabetical sequences correct
  • Maintains continuous improvement practices in work area
  • While performing the duties of the job, the employee is regularly required to talk or hear

Qualifications

  • A minimum of one (1) year experience welding in a production environment or valid welding certification
  • Ability to read blueprints and drawings
  • Ability to obtain and maintain CWB and AWS welding certification in accordance with Cornerstone Building Brands welding procedures
  • Experience with forklift and/or overhead crane operation a plus
  • Comfort and familiarity with power hand tools
  • Willingness to train, certify, and operate forklift and overhead crane
  • Ability to work effectively to meet deadlines
  • Ability to work collaboratively within a team environment
  • General mathematical knowledge and proficiency with basic measuring instruments

Additional Information

Site Address: 550 Industry Way, Atwater, CA 95301

Why work for Cornerstone Building Brands?

Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development.

*Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement.

California Consumer Privacy Act (CCPA) of 2018

Must be at least 18 years of age to apply.

Note to External Recruiters

Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized.

Notice of Recruitment Fraud

We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Cornerstone Building Brands is an Equal Opportunity Employer.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response.

All your information will be kept confidential according to EEO guidelines.

Something wrong with this job? Report it · This flag looks wrong