Assembler jobs

Hydraulics Technician

DZ Grinders LLCCaldwell, IDFull-timeOn-sitePosted 22 days ago

Pay not listed

Looks real. 1 thing to check before you apply.

On DZ Grinders LLC’s own careers site (Workable), checked open today.

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteWorkable board
  • Checked: Checked open todayWorkable board
  • Checked: No reposts foundWorkable board
  • Trust score 95 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Inspect tools and equipment for safe operation and report needed repairs or replacements.
  • Crimp hydraulic hose and flare tube fittings, build valves, and cut hoses to print specifications.
  • Install hoses, tubes, valves, pumps, and motors according to prints.
  • Operate equipment to produce parts; inspect finished parts for quality and report non-conformities.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Skills

  • Ability to read and understand parts lists and form the correct number of parts to the required specification
  • Ability to accurately use a tape measure, operate computer software, and read blueprints

On the job

  • Ability to measure, hold, and position materials
  • Ability to reach over and around objects to lift, move, or place materials in designated locations
  • Ability to lift up to 50 pounds frequently
Show 6 moreShow less
  • Ability to occasionally lift objects weighing over 50 pounds with assistance
  • Ability to move under, over, and through tight spaces
  • Ability to safely work on raised platforms, climb stairs or ladders, and climb off equipment or ladders
  • Ability to stand for extended periods of time
  • Ability to bend, squat, kneel, climb, push, pull, and reach above and below shoulder height
  • Ability to handle, place, manipulate, operate, stack, and connect equipment and materials using fine and basic hand skills

Other requirements

  • Ability to accurately read and understand written instructions or plans
  • Ability to accurately understand verbal instructions or plans
  • Ability to verbally communicate with coworkers and supervisors
  • Ability to work extended shifts as needed

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical insurance policies
Dental & vision
Dental and vision insurance policies
Retirement plan
401(k) options with up to 4% company match
Paid time off
Prorated first-year PTO after completion of a 90-day probationary period; PTO schedule increases with seniority at the 1-, 5-, and 10-year anniversaries
Bonus
Gain Sharing Employee Incentive Plan available after a 30-day waiting period
Life & disability insurance
$20,000 employee life insurance policy paid for by the company, Supplemental long- and short-term disability policies available for purchase, Voluntary life insurance for employees, spouses, and children with guaranteed issue, available for purchase
Other
Employee discount on purchased tools and items, Reduced-cost company-branded uniforms

Full job description

From DZ Grinders LLC’s careers site

The Hydraulics technician is responsible for safely and accurately following instructions and blue prints in order to lay out, assemble, install, and maintain hydraulic equipment. The Hydraulics Technician will also handle materials, count parts, and ensure safe and efficient operation of the work area.

Essential Responsibilities

  • Visually inspects tools and equipment for safety and proper operation at the beginning of each shift. Notifies supervisor or maintenance of needed repairs or replacements
  • Crimps fittings onto Hydraulic Hoses and Flair Tubes
  • Builds valves and cuts hose per print specifications
  • Installs hoses, tubes, valves, pumps, and motors per print specifications
Show full descriptionShow less
  • Safely operates equipment to produce parts for the production process
  • Inspects finished parts for quality and accuracy and informs supervisor of any non-conformities
  • Maintain and use all required personal protective equipment as outlined in the Diamond Z Safety Manual
  • Understands and follows all Diamond Z safety policies and procedures
  • Perform other tasks as assigned or needed

Additional Responsibilities

  • Appropriately disposes of scrap material and waste
  • Cleans and organizes work area.
  • Assists with special projects as assigned by supervisor
  • Marks specific parts for identification

Working Conditions

  • Temperature and humidity variances consistent with normal outdoor ranges. Climate control in the facilities is limited. May occasionally require working outdoors
  • Air contaminates such as smoke and dust may be present but are below the recognized TLV
  • The presence of electrical and compressed air sources
  • The presence of bottled gas and oxygen
  • The presence of chemicals
  • The presence of moving equipment, lift trucks, or other vehicles
  • Exposure to flying particles, hot or molten metal
  • Exposure to light radiation from welding or plasma cutting
  • Exposure to sharp edges and points on steel and abrasive tools
  • Exposure to falling or rolling steel

Requirements

  • Ability to accurately read and understand written instructions or plans
  • Ability to accurately understand verbal instructions or plans
  • Ability to measure, hold, and position materials
  • Ability to read and understand parts lists to form correct number of parts to the required specification
  • Ability to reach over and around objects to lift, move, or place objects or materials in designated locations
  • Ability to accurately use a tape measure, operate computer software, and read blue prints
  • Ability to lift up to 50 pounds frequently
  • Ability to occasionally lift objects weighing over 50 pounds with assistance
  • Ability to move under, over, and through some tight spaces
  • Ability to safely work on raised platforms, climb stairs or ladders, and climb off equipment or ladders
  • Ability to stand for extended periods of time
  • Ability to bend, squat, kneel, climb, push, pull, and reach both above and below shoulder height
  • Ability to handle, place, manipulate, operate, stack, and connect equipment and materials through fine and basic hand skills
  • Ability to verbally communicate with coworkers and supervisors in a safe and productive manner
  • Ability to work extended shifts to meet business demands as needed
  • Ability to pass a pre-employment drug screen

Benefits

  • Competitive medical, dental, and vision insurance policies
  • 401(k) options with up to 4% company match
  • $20,000 Life Insurance Policy for the employee paid for by Diamond Z
  • Gain Sharing Employee Incentive Plan available to all employees after 30 day waiting period
  • Prorated PTO amount for the employee's first year of employment after the completion of 90 day probationary period
  • Graduated PTO schedule based on seniority within the company at the 1 year, 5, year, and 10 year anniversaries
  • Supplemental benefit policies available for buy in including Long and Short Term Disability, employee discount on any purchased tools/items, employee reduced cost on company branded uniforms, Voluntary Life Insurance for the employee, spouse, and children with Guaranteed Issue

We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, disability, sexual orientation, or any other legally protected status. DZ Grinders, LLC is an Equal Opportunity Employer.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Assembly Technician

Okie Staffing (agency) · Broken Arrow, OK

$16/hrContract-to-hireOn-site

StrongChecked open todayPosted 9 days ago

Assembler

S&C · Chicago, IL

$20.25/hrOn-site

StrongChecked open todayPosted 2 days ago

Outfitter I

The Copper River Family of Companies · Clackamas, OR

$24.55–$39.98/hrOn-site

StrongChecked open todayPosted 9 days ago

Assembler

Ralliant · Fairport, NY

$23.50/hrFull-timeOn-site

StrongChecked open todayPosted 10 days ago

See more like this