Manufacturing & Production jobs

Mold Technician

Bosch GroupAlbion, INFull-timeOn-site2nd shiftPosted 2 days ago

Pay not listed

Looks real and checked open today.

On Bosch Group’s own careers site (SmartRecruiters).

Trust score ready Nov 26

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteSmartRecruiters board
  • Checked: Checked open todaySmartRecruiters board
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 26
See all 4 checksShow fewer
How we check

What you’ll do

  • Install, remove, set up, and start or shut down molds, machines, and materials for production.
  • Monitor production metrics and verify setups, process parameters, and part quality; troubleshoot alarms and process or equipment issues.
  • Maintain and inspect molds, auxiliary equipment, material systems, and tooling; document work and production losses.
  • Promote safe, organized work practices, train less experienced technicians, and support maintenance, engineering, quality, and production teams.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Technical certifications or formal training such as RJG Master Molder, Paulson, Routsis, AIM, or equivalent industry-recognized programs (preferred)

Experience

  • Previous experience in plastic injection molding, mold setup, process technician work, or a closely related manufacturing role, or an equivalent combination of education, technical training, and work (preferred)
  • Experience with 500–1,900 ton injection molding machines, such as Nissei, Krauss Maffei, or Engel (preferred)
  • Experience with mold process monitoring systems, including cavity pressure transducers, sensors, and data acquisition equipment (preferred)
  • Experience programming, operating, or troubleshooting six-axis robots, such as Nachi or Fanuc (preferred)
  • Experience using OEE, downtime, scrap, cycle time, and schedule adherence metrics to improve production performance (preferred)
  • Participation in continuous improvement, root cause analysis, or scrap reduction initiatives (preferred)

Education

  • High School Diploma or General Education Diploma (GED)

Skills

  • Ability to safely operate overhead cranes and rigging equipment, or obtain certification as required (preferred)
  • Basic mechanical aptitude and ability to safely use hand tools, measuring devices, and maintenance equipment (preferred)
  • Ability to read and interpret process sheets, setup instructions, safety procedures, technical manuals, and engineering documentation (preferred)
  • Knowledge of Scientific Molding and Decoupled Molding principles (preferred)

On the job

  • Wear required personal protective equipment (PPE), including safety glasses, hi-vis attire, hearing protection, steel-toe footwear, and gloves
  • Safely work around suspended loads, pinch points, and stored energy while following lockout/tagout and machine safety procedures

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Bosch Group’s careers site

Company Description

Do you want beneficial technologies being shaped by your ideas? Whether in the areas of mobility solutions, consumer goods, industrial technology or energy and building technology - with us, you will have the change to improve quality of life all across the globe. Welcome to Bosch!

Job Description

Position Summary:

Show full descriptionShow less

The Mold Technician is responsible for maintaining the safe, reliable, and efficient operation of injection molds and supporting equipment to ensure uninterrupted production. This position plays a key role in producing quality parts by troubleshooting mold-related issues, minimizing downtime, reducing scrap, and supporting production goals. The Mold Technician is expected to demonstrate strong situational safety awareness, promptly escalate safety concerns, and contribute to continuous improvement initiatives that enhances the culture order of Safety, Quality, Delivery and Cost . Success in this role directly impacts operational performance, customer satisfaction, and the company's commitment to manufacturing excellence.

Main Responsibilities:

  • Perform mold installation, removal, machine setup, material setup, and process startup/shutdown to ensure safe and efficient production.
  • Monitor assigned production zone performance by tracking and responding to key performance indicators (KPIs), including OEE, equipment downtime, scrap, schedule adherence, and workplace organization.
  • Verify job setups, process parameters, and production conditions to ensure quality parts are produced and approved processes are maintained.
  • Troubleshoot molding processes, respond to machine alarms, remove stuck parts, and resolve process or equipment issues to minimize downtime and maintain production flow.
  • Document daily activities, process changes, troubleshooting efforts, and production losses with accurate and detailed notes to support communication and continuous improvement.
  • Inspect molds following maintenance, repair, or modification by performing dimensional re-verifications and confirming production readiness before release.
  • Maintain molds, auxiliary equipment, material distribution systems, water lines, and related tooling through cleaning, minor repairs, date wheel changes, and preventative maintenance activities.
  • Promote a safe, clean, and organized work environment by maintaining 5S standards, demonstrating situational safety awareness, and promptly escalating safety concerns.
  • Support the development of team members by training and mentoring less experienced Mold Technicians and sharing technical knowledge and best practices.
  • Participate in continuous improvement initiatives by identifying opportunities to reduce scrap, improve equipment performance, increase process stability, and enhance overall operational efficiency.
  • Assist with mold trials, new product launches, engineering evaluations, and validation activities as needed.
  • Support maintenance, engineering, quality, and production teams by providing technical expertise during troubleshooting and improvement initiatives.
  • Maintain inventory of commonly used tooling, fittings, hoses, and setup supplies while identifying replenishment needs.
  • Participate in cross-functional meetings, safety initiatives, audits, and training activities to support departmental and organizational objectives.
  • Recommend improvements to standard work, procedures, tooling, and processes to enhance safety, quality, efficiency, and equipment reliability.
  • Perform other duties and special projects as assigned to support business and operational needs.

Qualifications

Required

  • High School Diploma or General Education Diploma (GED) required.

Preferred

  • Previous experience in plastic injection molding, mold setup, process technician, or a closely related manufacturing role, or an equivalent combination of education, technical training, and relevant experience.
  • Ability to safely operate overhead cranes and rigging equipment or obtain certification as required by company policy.
  • Basic mechanical aptitude with the ability to safely use hand tools, measuring devices, and maintenance equipment.
  • Ability to read and interpret process sheets, setup instructions, safety procedures, technical manuals, and engineering documentation.
  • Experience with 500–1,900 ton injection molding machines (Nissei, Krauss Maffei, Engel, or equivalent).
  • Knowledge of Scientific Molding and Decoupled Molding principles.
  • Experience with mold process monitoring systems, including cavity pressure transducers, sensors, and data acquisition equipment.
  • Experience programming, operating, or troubleshooting six-axis robots (Nachi, Fanuc, or equivalent).
  • Technical certifications or formal training such as RJG Master Molder, Paulson, Routsis, AIM, or equivalent industry-recognized programs.
  • Experience using manufacturing performance metrics such as OEE, downtime, scrap, cycle time, and schedule adherence to improve production performance.
  • Demonstrated participation in continuous improvement, root cause analysis, or scrap reduction initiatives.

Additional Information

Work Environment:

While performing the duties of this job, the employee occasionally works near moving mechanical parts and is exposed to a manufacturing environment. The noise level in the work environment is usually moderate.

  • Work is primarily performed in a fast-paced plastic injection molding manufacturing environment supporting production operations.
  • Regular exposure to moving machinery, automated robots, overhead cranes, forklifts, conveyors, hydraulic and pneumatic systems, and other industrial equipment.
  • Frequent exposure to hot molds, heated plastic, water systems, lubricants, hydraulic oils, compressed air, and electrical equipment while performing setup, troubleshooting, and maintenance activities.
  • Periodic exposure to elevated temperatures, humidity, vibration, dust, noise, and slippery walking surfaces resulting from manufacturing operations.
  • Required to wear appropriate personal protective equipment (PPE), including safety glasses, hi-vis attire, hearing protection, steel-toe footwear, gloves, and any additional PPE required for specific tasks.
  • Must safely work around suspended loads, pinch points, stored energy sources, and other hazards associated with mold changes, equipment setup, and manufacturing processes while following all lockout/tagout and machine safety procedures.
  • Position requires flexibility to respond to production issues, machine alarms, equipment failures, and changing production priorities throughout the shift.
  • Regular interaction with Production, Maintenance, Quality, Engineering, Tool Room, and Materials personnel to support safe, efficient, and reliable manufacturing operations.

BOSCH is a proud supporter of STEM (Science, Technology, and Engineering & Mathematics) Initiatives

FIRST Robotics (For Inspiration and Recognition of Science and Technology)

AWIM (A World In Motion)

Equal Opportunity Employer, including disability / veterans.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Press Operator

Vericast · Jeffersonville, IN

$19–$21/hrFull-timeOn-site

StrongChecked open todayPosted yesterday

Wiring Technician Lead

Mission Critical Group · Brookston, IN

Full-timeOn-site

StrongPay not listedChecked open todayPosted 19 days ago

Mold Technician

Bosch Group · Albion, IN

Full-timeOn-site

StrongPay not listedChecked open todayPosted 29 days ago

Quality Inspector

Bosch Group · Albion, IN

Full-timeOn-site

Looks goodPay not listedChecked open todayPosted 10 days ago

See more like this