Quality Control Inspector jobs

Technical Services Representative

Sherwin-WilliamsPortland, ORFull-timeOn-sitePosted 4 days ago

Pay not listed

Key facts

Experience
4+ years
US visa
No US visa sponsorship
Clearance
Security clearance required

Looks real and checked open today.

On Sherwin-Williams’ own careers site (Oracle Recruiting).

Trust score ready Nov 25

  • To check: No pay range listedAsk for the pay range before you interview.
  • Checked: On the company's own careers siteOracle Recruiting board
  • Checked: Checked open todayLive check
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 25
See all 4 checksShow fewer
How we check

What you’ll do

  • Provide on-site technical support during vessel availabilities, observe coating work, and train vessel personnel.
  • Inspect and document surface preparation, environmental conditions, coating application, measurements, and compliance with specifications.
  • Prepare daily progress reports, inspection deliverables, deficiency notices, photographs, and coating condition survey reports.
  • Track paint and thinner inventories, forecast shortages, document spray loss and waste, and prepare final job inventory reports.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Valid, unrestricted driver's license
  • A coating-inspection certification satisfying the contract's FSTR staffing requirements: AMPP Level II Certified Coating Inspector, ACQPA/FROSIO Inspector Red Card, NACE Level I, or ACQPA/FROSIO Blue
  • AMPP CIP Level II or Level III certification (preferred)

Experience

  • At least four years of marine coatings application experience through shipyard paint shop work, employment with a marine paint application company, or technical representative experience for a marine‑
  • Previous Military Sealift Command or U.S. Navy vessel experience (preferred)
  • Government or major commercial shipyard experience (preferred)
  • Drydock availability experience (preferred)
  • Experience inspecting underwater hull coating systems (preferred)
  • Tank and confined-space coating inspection experience (preferred)
  • Deck and nonskid coating experience (preferred)

Education

  • High school diploma or GED

Skills

  • Ability to operate a computer and communicate via telephone
  • Working knowledge of ASTM, AMPP/NACE, SSPC, MIL-PRF, and marine coating manufacturer requirements (preferred)
  • Technical-report writing and photographic documentation skills (preferred)

On the job

  • Able to tolerate non-toxic paint odors and wear a respirator as required
  • Able to perform inspection activities in marine industrial environments, safely use inspection instruments, and wear required PPE

Other requirements

  • At least 18 years of age
  • Legally authorized to work in the country of employment without current or future visa sponsorship
  • Able to travel at least 50%
  • Able to obtain and maintain credentials and authorizations required for assigned Government, military, MSC vessel, shipyard, port, and facility access
  • Able to provide information for security checks and facility access processing and obtain unescorted vessel access when required
  • Able to obtain and maintain DBIDS credentials where required, and meet vehicle-access requirements where applicable
  • Able to provide full-time on-site support for assigned availability periods, typically 60 to 90 days

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From Sherwin-Williams’ careers site

The Technical Service Representative has knowledge of surface preparation equipment and methods as well as the successful application of industrial coatings using single and heated plural component spray equipment. Responsibilities include conducting product training and application demonstrations while ensuring our customers’ expectations are met when it comes to job site support, supporting the efforts of sales representatives and also be a liaison to the lab organization. This role engages with customers in various industrial segments to include steel fabrication, bridge and highway, water/wastewater and the petrochemical markets.

Additional Information:

Show full descriptionShow less

This position is a field position and will be expected to travel at least 50% of the time, in the Maryland/Virginia areas.

Job duties include contact with other employees and access confidential and proprietary information and/or other items of value, and such access may be supervised or unsupervised. The Company therefore has determined that a review of criminal history is necessary to protect the business and its operations and reputation and is necessary to protect the safety of the Company’s staff, employees, and business relationships.

Full-Time On-Site Technical Support

  • Provide full-time on-site technical support to the MSC Port Engineer during assigned vessel availabilities and critical coating operations.
  • Be present when the industrial facility performs paint-related work, from initial surface cleaning and preparation through coating application, curing, and final acceptance inspection, as directed by the Port Engineer.

Coating Inspection

  • Monitor and document surface cleaning, surface preparation, environmental conditions, application techniques, coating-system requirements, manufacturer technical requirements, and compliance with applicable work specifications.
  • Inspect surface preparation and application of each coating layer to verify conformity with specifications and manufacturer-published technical data.

Inspection Measurements

  • Take and document ambient temperature, substrate temperature, dew-point temperature, relative humidity, surface profile, paint application and consumption, product identification, batch numbers, color, Wet Film Thickness (WFT), paint/thinner ratio for spray reduction, and Dry Film Thickness (DFT).
  • Obtain two DFT readings per 10 square meters for each coat, as required.

Daily Reporting

  • Prepare detailed Daily Paint Progress Reports (CDRL-015.01) documenting inspection results, environmental conditions, coating application, material consumption, deficiencies, and other required information.
  • Coordinate daily review and signature of the report by the FSTR and Port Engineer.

Deficiency Reporting

  • Immediately notify the Port Engineer and Contracting Officer Representative (COR) of deficiencies that could void the General Warranty or cause significant problems.
  • Provide required written notification within 24 hours and document deficiencies through the Daily Paint Progress Report and Summary Exception Report, as applicable.

Photographic Documentation

  • Take required progress photographs while the vessel is in drydock, before and after high pressure water washing, after surface preparation, and after painting is complete.
  • Take additional photographs when unusual conditions or serious deficiencies require documentation.

Coating Condition Surveys

  • Perform coating condition surveys as directed, including topsides and superstructure, tanks and voids, underwater hull and boottop, deck machinery, and other designated coating areas.
  • Conduct surveys and prepare reports in accordance with ASTM F 1130-99 (2014), including maintenance or repair recommendations and representative photographs.

Material and Inventory Management

  • Maintain daily inventory records for paints and thinners delivered to and applied by the industrial facility or subcontractors.
  • Perform additional inventories when requested.
  • Review shipyard production schedules and identify potential shortages at least 10 calendar days before the anticipated need date.

Final Job Inventory

  • Within 24 hours after completion of painting, inventory remaining unopened paints, solvents, and other applicable products and prepare the Final Job Inventory Report.
  • Arrange for removal of unused and unopened materials within 24 hours following completion of the inventory.

Paint Waste and Spray-Loss Monitoring

  • Monitor and document exterior spray loss exceeding 40%, unnecessary paint waste, reasons for excessive loss, conservation of remaining usable coating material, and related discussions with the Port Engineer and shipyard personnel.

Shipboard Service Calls and Training

  • Provide or update Paint Handbook materials, deliver shipboard coating training, review onboard coating inventories, evaluate six-month paint supply, identify expired materials, discuss coating concerns with vessel personnel, and complete the required Service Call Report.

Required Contract Documentation

The TR must prepare and/or support preparation of applicable contract deliverables, including:

- CDRL-015.01 - Daily Paint Progress Report

- CDRL-015.02 - Hull Condition Report

- CDRL-015.03 - Surface Preparation Report

- CDRL-015.04 - Application Data Summary Report

- CDRL-015.05 - Summary Exception Report

- CDRL-015.06 - Photographs

- CDRL-015.07 - Coating Inspection Report

- CDRL-015.08 - Final Job Inventory Report

- CDRL-015.09 - IMO Antifouling Paint Certificate

- CDRL-015.10 - Flight Deck Resurfacing Memo, when applicable

- CDRL-012 - Service Call Report

- CDRL-015 - Final Availability Report

- CDRL-019 – Square Footage Tracker

Inspection Equipment

The TR must have access to the instruments and equipment necessary to perform assigned inspection duties, as well as industry recognized visual guides covering:

- Power tool cleaning

- Abrasive-blast cleaning

- UHP water-jetting

- Surface preparation standards

- Coating failure types, causes, and remedies

Company-specific visual guides are not acceptable substitutes for required recognized industry standards guides.

Domestic Travel and Work Location

  • This position is U.S. mainland/CONUS-based and requires extensive domestic travel to support MSC vessel availabilities, service calls, shipyards, ports, military installations, and other assigned facilities.
  • MSC availability periods are typically 60 to 90 days, and the representative must be available to support the assigned availability for its duration.
  • No international or OCONUS travel requirement is included in this position description.

Work Schedule

  • During an availability, the TR must provide full-time on-site support and be present when the industrial facility is performing paint related work, as directed by the Port Engineer.
  • The employee must have the schedule flexibility necessary to support shipyard production and assigned coating operations, including work outside normal business hours when required by the assigned project.

Physical and Working Environment Requirements

  • The employee must be capable of performing technical inspection activities in active marine industrial environments, including shipyards, drydocks, piers, vessels, tanks, machinery spaces, decks, and other coating work areas applicable to the assignment.
  • The employee must be able to safely use required inspection instruments and wear appropriate personal protective equipment required by the applicable facility or work environment.

Minimum Requirements:

  • Must be at least eighteen (18) years of age
  • Must be legally authorized to work in the country of employment without needing sponsorship for employment work visa status now or in the future (e.g., OPT, CPT, H1B, EB-1,etc.)

- Must have a high school diploma or GED

- Must be able to tolerate non-toxic paint odors and be able to wear a respirator as required.

  • Must have a valid, unrestricted drivers license.

- Must have the ability to operate a computer and communicate via the telephone.

- Must be able to travel at least 50%

- The candidate must possess a minimum of four years of prior experience in marine coatings applications through one or more of the following:

- Shipyard paint shop experience;

- Employment with a marine paint application company normally contracted for ship coating work; or

- Technical representative experience for a marine paint manufacturer.

  • The candidate must possess a coating-inspection certification that satisfies the contract's FSTR staffing requirements. Recognized certifications include:

- AMPP Level II Certified Coating Inspector

- ACQPA/FROSIO Inspector, Red Card

- NACE Level I

- ACQPA/FROSIO Inspector, Blue Card

  • The successful candidate must be able to obtain and maintain all credentials and authorizations necessary to perform assigned work at:

- U.S. Department of Defense installations

- U.S. military and Navy bases

- Military Sealift Command vessels

- U.S. commercial and Government shipyards

- U.S. ports and waterfront facilities

- Other controlled Government or industrial facilities associated with assigned MSC work.

  • Certain MSC ship overhauls may occur at facilities requiring visitor security clearance. The employee must provide personnel information necessary for applicable security checks and facility access processing. The employee must also be capable of obtaining unescorted vessel access when required for assigned duties.
  • The employee must be capable of obtaining and maintaining Defense Biometric Identification System (DBIDS) credentials where required for access to applicable Department of Defense facilities. Credentials must remain active for the specific facility and performance period. The employee must also meet applicable requirements for vehicle access to Navy and other controlled facilities when vehicle access is required.
  • Continued employment in this position is contingent upon the employee's ability to obtain and maintain all Government, Department of Defense, military installation, MSC vessel, U.S. port, shipyard, and facility-specific access credentials necessary to perform assigned duties. The inability to obtain or maintain required access may prevent the employee from performing the essential functions of the position.

Preferred Qualifications:

  • AMPP CIP Level II or Level III certification;
  • Previous Military Sealift Command or U.S. Navy vessel experience;
  • Government or major commercial shipyard experience;
  • Drydock availability experience;
  • Experience inspecting underwater hull coating systems;
  • Tank and confined-space coating inspection experience;
  • Deck and nonskid coating experience;
  • Working knowledge of ASTM, AMPP/NACE, SSPC, MIL-PRF, and marine coating manufacturer requirements
  • Strong technical-report writing and photographic documentation skills.

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Test Technician

Coherent Corp. US · Wilsonville, OR

On-site

StrongPay not listedChecked open todayPosted 24 days ago

Quality Inspector

Panthalassa · Portland, OR

$35–$45/hrFull-timeOn-site

StrongOpen 2 monthsChecked open todayPosted 2 months ago

Manufacturing Associate - I

Vanguard EMS, Inc. · Beaverton, OR

Pay not listedFull-timeOn-site

Strong2 to checkChecked open todayPosted 2 months ago

Test Technician

Vanguard EMS, Inc. · Beaverton, OR

Pay not listedFull-timeOn-site

Strong2 to checkChecked open todayPosted 2 months ago

QA/QC Inspector

Harder Mechanical Contractors · Portland, OR

Full-timeOn-site

StrongPay not listedChecked open todayPosted 21 days ago

Test Technician TEMP

Coherent Corp. US · Wilsonville, OR

Pay not listedTemporaryOn-site

Looks good2 to checkChecked open todayPosted 5 months ago

See more like this