Aerospace Engineer jobs

Spacecraft Systems Engineer II - Guidance, Navigation & Control

Quantum SpaceRockville, MD +2 placesPosted 5 days ago

$110k–$220k/yr listed by the employer

Key facts

Where
Rockville, MD · Hawthorne, CA · MD, US
Experience
3+ years
Degree
Bachelor's degree
US visa
No US visa sponsorship
Clearance
Security clearance required

Looks real and checked open today.

On Quantum Space’s own careers site (Greenhouse).

Trust score ready Nov 24

  • To check: Wide pay range: top of the range is 2× the bottomAsk what the job pays at your level before you interview.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Note: Too new for a trust scoreScored after a week of daily checks, from Nov 24
See all 5 checksShow fewer
How we check

What you’ll do

  • Develop and maintain spacecraft GNC requirements, architectures, and subsystem interfaces.
  • Analyze spacecraft dynamics, control performance, sensors, actuators, and mission scenarios; support GNC algorithm evaluation and trade studies.
  • Coordinate GNC requirements and interfaces with flight software, avionics, propulsion, and other spacecraft teams.
  • Develop verification strategies, test plans, procedures, and acceptance criteria; support simulation, SIL/PIL, FlatSat, and HIL testing.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 3–7 years of experience in spacecraft GNC engineering, spacecraft systems engineering, controls engineering, or aerospace vehicle dynamics and control; advanced degrees count toward experience
  • Experience supporting the design, analysis, development, or verification of GNC systems for spacecraft or other aerospace applications
  • Experience developing, managing, or verifying system and subsystem requirements for GNC functions
  • Experience performing or supporting spacecraft dynamics and control system modeling, simulation, and performance analysis
  • Experience coordinating technical interfaces between GNC, flight software, avionics, propulsion, and other spacecraft subsystems
  • Ability to independently manage assigned technical responsibilities and collaborate in a multidisciplinary engineering environment
  • Experience developing or integrating GNC systems for small satellites, microsatellites, or larger spacecraft platforms (preferred)
  • Experience with high-mobility spacecraft, precision pointing, autonomous maneuvering, or high-delta-V mission design (preferred)
  • Experience developing or implementing attitude determination and control algorithms, including quaternion-based attitude representations, state estimation, and control laws (preferred)
  • Experience modeling spacecraft dynamics, environmental disturbances, actuator behavior, and sensor performance (preferred)
  • Experience supporting GNC integration and testing, including sensor characterization, actuator testing, HIL simulations, and end-to-end performance verification (preferred)
  • Experience supporting U.S. Space Force, SSC, NASA, NRO, SDA, AFRL, or other national security space programs (preferred)

Education

  • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Physics, or a related technical field
  • Master's degree (preferred)

Skills

  • Strong understanding of spacecraft dynamics, rigid-body kinematics, orbital mechanics, attitude determination, and control theory
  • Understanding of spacecraft ADCS architectures, including sensors, actuators, estimation algorithms, and control algorithms
  • Familiarity with spacecraft navigation, orbit determination, trajectory planning, and maneuver execution concepts
  • Understanding of spacecraft sensors and actuators, including star trackers, sun sensors, IMUs, reaction wheels, magnetometers, magnetorquers, and thrusters
  • Familiarity with SIL, PIL, FlatSat, and HIL integration and verification approaches
  • Ability to analyze technical performance, identify system-level risks, and develop practical solutions to GNC challenges
  • Familiarity with orbit determination, state estimation, Kalman filtering, sensor fusion, and navigation algorithms (preferred)
  • Proficiency with MATLAB, Simulink, STK, GMAT, Basilisk, or equivalent engineering and simulation software (preferred)
  • Programming experience using Python, C/C++, MATLAB, or similar engineering tools (preferred)
  • Familiarity with spacecraft flight software architectures, embedded systems, real-time control systems, and hardware-software interfaces (preferred)
  • Understanding of propulsion interactions with GNC, including thrust vectoring, impulse delivery, attitude disturbances, and maneuver execution (preferred)
  • Experience with Jama, DOORS, JIRA, and Confluence for requirements and configuration management (preferred)

Other requirements

  • Applicants must be a U.S. citizen, lawful permanent resident, protected individual under 8 U.S.C. 1324b(a)(3), or eligible to obtain required U.S. Department of State authorizations
  • Active U.S. security clearance or ability to obtain one (preferred)

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical coverage, Health savings account (HSA)
Dental & vision
Dental and vision coverage
Retirement plan
401(k) matching
Paid time off
Generous leave
Equity
Equity sharing; competitive equity grants are included in the majority of full-time offers

Full job description

From Quantum Space’s careers site

Quantum Space is redefining mobility and maneuverability in space. Our high-mobility spacecraft platforms support national security, civil, and commercial missions with unmatched flexibility and propulsion capability. We build fast and iterate quickly.

Who We're Looking For

We are seeking a technically strong and systems-minded Spacecraft Systems Engineer II – Guidance, Navigation & Control (GNC) to support the design, development, integration, and verification of GNC systems for our next-generation spacecraft platforms.

Show full descriptionShow less

In this role, you will help define and implement the guidance, navigation, and control capabilities that enable spacecraft to perform complex maneuvers, maintain precise attitude and trajectory control, and execute mission objectives. You will work closely with spacecraft systems engineering and multidisciplinary teams across flight software, avionics, propulsion, structures, and mission operations to translate mission objectives and spacecraft-level requirements into GNC architectures, functional requirements, interfaces, and verification approaches.

You will contribute throughout the spacecraft development lifecycle, supporting GNC architecture development, requirements definition, algorithm analysis, performance assessments, system integration, and verification. This position combines spacecraft systems engineering with practical GNC engineering, emphasizing system-level performance, subsystem interfaces, and mission requirements.

This role is ideal for an engineer with a strong understanding of spacecraft dynamics, control systems, and orbital mechanics who enjoys solving complex technical challenges and working across disciplines. At the Level II level, you will independently own defined GNC functions, analyses, and interfaces while receiving technical guidance on broader architectural and mission-level decisions.

Where You'll Make an Impact

  • Develop, manage, and maintain spacecraft GNC requirements derived from mission objectives, spacecraft-level requirements, and vehicle operational concepts.
  • Support the development and maintenance of GNC architectures, including guidance, navigation, attitude determination, attitude control, and trajectory control functions.
  • Perform and support spacecraft dynamics and control analyses to evaluate vehicle stability, pointing performance, maneuverability, and overall mission performance.
  • Support the development, analysis, and evaluation of GNC algorithms for attitude determination, attitude control, orbit determination, trajectory planning, and maneuver execution.
  • Analyze spacecraft attitude and orbital dynamics, including disturbance environments, actuator performance, sensor characteristics, and vehicle response.
  • Support the development and evaluation of spacecraft pointing, stabilization, maneuvering, and trajectory requirements across nominal and off-nominal mission scenarios.
  • Conduct GNC trade studies evaluating control architectures, sensor configurations, actuator sizing, control performance, and navigation approaches.
  • Support the analysis and selection of GNC hardware and components, including star trackers, sun sensors, inertial measurement units (IMUs), reaction wheels, magnetometers, magnetorquers, and propulsion-based control actuators.
  • Develop and maintain GNC interface requirements and interface control documentation (ICDs) between flight software, avionics, sensors, actuators, propulsion, and other spacecraft subsystems.
  • Collaborate with flight software and avionics engineers to translate GNC algorithms and functional requirements into implementable software and hardware interfaces.
  • Support spacecraft simulation, modeling, and analysis activities to evaluate GNC performance across different mission phases, operational modes, and environmental conditions.
  • Develop and support GNC verification strategies, test plans, procedures, and acceptance criteria to demonstrate compliance with spacecraft performance requirements.
  • Support Software-in-the-Loop (SIL), Processor-in-the-Loop (PIL), FlatSat, and Hardware-in-the-Loop (HIL) integration and test activities, as applicable.
  • Analyze simulation and test results, investigate performance anomalies, and coordinate resolution of GNC-related issues across engineering disciplines.
  • Participate in technical reviews, including System Requirements Reviews (SRR), Preliminary Design Reviews (PDR), Critical Design Reviews (CDR), Test Readiness Reviews (TRR), and other spacecraft-level design and integration reviews.
  • Support spacecraft assembly, integration, environmental testing, and flight readiness activities to ensure GNC requirements and interfaces are successfully verified.
  • Contribute to continuous improvement of GNC engineering processes, analysis methodologies, modeling practices, and verification standards.

What It Takes

  • Bachelor's degree in Aerospace Engineering, Mechanical Engineering, Electrical Engineering, Physics, or a related technical field. Master's degree preferred.
  • 3–7 years of experience in spacecraft GNC engineering, spacecraft systems engineering, controls engineering, or aerospace vehicle dynamics and control; Advanced degrees will count toward experience.
  • Experience supporting the design, analysis, development, or verification of GNC systems for spacecraft or other aerospace applications.
  • Strong understanding of spacecraft dynamics, rigid-body kinematics, orbital mechanics, attitude determination, and control theory.
  • Experience developing, managing, or verifying system and subsystem requirements for GNC functions.
  • Understanding of spacecraft attitude determination and control system (ADCS) architectures, including sensors, actuators, estimation algorithms, and control algorithms.
  • Familiarity with spacecraft navigation, orbit determination, trajectory planning, and maneuver execution concepts.
  • Experience performing or supporting spacecraft dynamics, control system modeling, simulation, and performance analysis.
  • Understanding of spacecraft sensors and actuators, including star trackers, sun sensors, IMUs, reaction wheels, magnetometers, magnetorquers, and thrusters.
  • Experience coordinating technical interfaces between GNC, flight software, avionics, propulsion, and other spacecraft subsystems.
  • Familiarity with software and hardware integration and verification approaches, including SIL, PIL, FlatSat, and HIL testing.
  • Ability to analyze technical performance, identify system-level risks, and develop practical solutions to complex GNC challenges.
  • Strong analytical, problem-solving, technical documentation, and communication skills.
  • Ability to independently manage assigned technical responsibilities while collaborating effectively within a fast-paced, multidisciplinary engineering environment.

Nice-to-Have Experience

  • Experience developing or integrating GNC systems for small satellites, microsatellites, or larger spacecraft platforms.
  • Experience with high-mobility spacecraft, precision pointing, autonomous maneuvering, or high-delta-V mission design.
  • Experience developing or implementing attitude determination and control algorithms, including quaternion-based attitude representations, state estimation, and control laws.
  • Familiarity with orbit determination, state estimation, Kalman filtering, sensor fusion, and navigation algorithms.
  • Experience modeling spacecraft dynamics, environmental disturbances, actuator behavior, and sensor performance.
  • Proficiency with engineering and simulation tools such as MATLAB, Simulink, STK, GMAT, Basilisk, or equivalent software.
  • Programming experience using Python, C/C++, MATLAB, or similar engineering tools.
  • Familiarity with spacecraft flight software architectures, embedded systems, real-time control systems, and hardware-software interfaces.
  • Experience supporting GNC integration and testing, including sensor characterization, actuator testing, hardware-in-the-loop simulations, and end-to-end performance verification.
  • Understanding of propulsion system interactions with GNC, including thrust vectoring, impulse delivery, attitude disturbances, and maneuver execution.
  • Experience with spacecraft requirements and configuration management tools such as Jama, DOORS, JIRA, and Confluence.
  • Experience supporting U.S. Space Force, Space Systems Command (SSC), NASA, NRO, SDA, AFRL, or other national security space programs.
  • Active U.S. security clearance or ability to obtain one.

What You'll Get

Ownership – Take ownership of key spacecraft GNC engineering functions, analyses, and interfaces supporting the development of advanced spacecraft.

Innovation – Help develop next-generation spacecraft that redefine mobility and maneuverability in space.

Impact – Contribute to mission-critical programs supporting national security, civil, and commercial space customers.

Growth – Work alongside experienced spacecraft engineers in a collaborative environment focused on technical excellence, rapid execution, and continuous innovation.

Compensation – Competitive salary, equity, and comprehensive benefits including medical, dental, vision, generous leave, HSA, 401(k) matching, and equity sharing.

Location: Rockville, MD; Hawthorne, CA.

Base Salary: $110,000 to $220,000

The salary range for this role is an estimate based on a wide range of compensation factors. Actual salary offers may vary based on (but are not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are included in the majority of full-time offers and are considered part of Quantum Space's total compensation package.

Additional Requirements

To comply with U.S. Government space technology export regulations, including ITAR, applicants must be a U.S. citizen, lawful permanent resident, protected individual per 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.

Apply now. Join us in building the next generation of spacecraft.

Something wrong with this job? Report it

Similar jobs nearby

Thermal Engineer II

Quantum Space · Rockville, MD

$100k–$140k/yr

StrongChecked open todayPosted 22 days ago

Senior Systems Engineer

Umbra · Reston, VA +2 places

$180k–$210k/yrFull-timeOn-site

StrongOpen 2 monthsChecked open todayPosted 2 months ago

Space Systems Engineer

LV8D Solutions · Chantilly, VA

Full-timeOn-site

StrongPay not listedChecked open todayPosted 1 month ago

See more like this