Electrical Engineer jobs

Equipment Engineer IV

FirstEnergyFairmont, WV +1 placeOn-sitePosted 12 days ago

Pay not listed

Key facts

Schedule
Weekends
Where
Fairmont, WV · Williamsport, MD · on-site
Experience
7+ years
Degree
Bachelor's degree

Looks real. 1 thing to check before you apply.

On FirstEnergy’s own careers site (Oracle Recruiting), checked open today.

  • To check: No pay range listed, though one is likely required in MDAsk for the pay range before you interview. The law here likely requires one.
  • Checked: On the company's own careers siteOracle Recruiting board
  • Checked: Checked open todayOracle Recruiting board
  • Checked: No reposts foundOracle Recruiting board
  • Trust score 90 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Provide field engineering support for maintenance, construction, testing, and commissioning of substation equipment up to 500 kV.
  • Develop checkout guides, review test results and isolation plans, and develop energization plans.
  • Troubleshoot field design and equipment problems and provide technical support during installation, testing, and maintenance.
  • Audit maintenance paperwork and test results, and contribute to maintenance practices, technical reports, and training.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Licenses and certifications

  • Valid driver's license and reliable transportation
  • Fundamentals of Engineering (FE) Certificate (preferred)

Experience

  • Minimum 5 years of engineering experience with a BS in Engineering, or 7 years with a BS in Engineering Technology
  • Experience with SEL products and software, Enoserve RTS, and Doble testing
  • Ability to manage and prioritize multiple projects under deadlines, scope changes, budget constraints, and unforeseen field conditions
  • Ability to drive projects and tasks to completion by working in the field with regional substation crews
  • Previous experience designing, maintaining, or testing substation equipment (preferred)

Education

  • Bachelor of Science in Electrical or Mechanical Engineering from an ABET-accredited institution, or an accepted alternative: PE license; ABET-accredited BS in Engineering Technology; or a relevant non
  • Engineering degree preferred (preferred)

Skills

  • Strong mechanical aptitude and developed analytical and technical abilities
  • Working knowledge of electrical engineering, transmission substation equipment, transmission system protection, and transmission system operations (preferred)
  • Familiarity with understanding, applying, and communicating microprocessor-based protection and control equipment (preferred)

Other requirements

  • Understanding of FirstEnergy's Manual of Operations
  • Ability to participate in after-hours callouts, including evenings, weekends, and holidays, for system emergencies
  • Willingness to train and mentor technicians and other technical engineering staff
  • Live within a 45-minute commute of the assigned work location

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From FirstEnergy’s careers site

About the Opportunity

This is an open position with FirstEnergy Service Company, a subsidiary of FirstEnergy Corp.

All employees who apply for a posted position must notify their supervisors that they have applied. Employees who have not been in their current positions for at least one year or who are in a position with specific requirements beyond one year, must obtain approval from their supervisor before applying.

Show full descriptionShow less

The selected candidate may be offered a position within the same job family, at a level that is lower than what was posted. This will be determined based upon the results of the interview process which considers the candidate’s skills, work history, experience level, and other relevant qualifications.

This is an open position with FirstEnergy Service Co., a subsidiary of FirstEnergy Corp.

This position can be in the following office locations: Williamsport, MD or Fairmont, WV.

This position is to provide field engineering services and technical support for the maintenance, construction, testing and commissioning of substation equipment up to and including 500kV. Equipment includes power transformers, circuit breakers, CCVT's, Cap Banks, SVC's, associated relay protection and control equipment, and SCADA systems. Maintenance and commissioning activities can be of either new or modifications to existing substations. This position includes a significant amount of time (90% or more) working outside of an office environment at various company and customer substation facilities and service centers. In addition to maintenance and commissioning activities, there may be occasional technical support for regional substation activities including those in other operating companies.

Responsibilities Include:

  • Maintaining a safe workplace for coworkers and the community based upon developing knowledge of potential hazards, industry regulations/requirements and company practices.
  • Commissioning new transmission substation equipment prior to it being released to transmission operations.
  • Developing check-out guides, review and approving test results and isolation plans, and developing energization plans to minimize system risk.
  • Providing limited field design services to correct minor design problems encountered during the implementation of substation capital projects.
  • Providing onsite technical support to regional substation services employees during preventive and corrective maintenance activities.
  • Applying engineering skills and operational knowledge in the identification and resolution of technical problems while in the field during the installation phase, testing phase, and during the design life of the substation equipment. This includes challenging and validating design approaches when necessary.
  • Assisting in the development of new or in the modification of existing maintenance practices to address changing technology, new equipment types, improved test and diagnostic methods, regulatory changes, etc.
  • Auditing preventive and corrective maintenance paperwork and test results to verify technical adequacy and regulatory completeness.
  • Providing emergency technical support following substation equipment failures to support customer restoration and system reinforcement. This includes developing field modifications and commissioning the installation of mobile substations.
  • Supporting the emergency plan through participation in assigned storm duties including hazard responding.
  • Ability to work both independently and in unison with others including regional and plant personnel as well as other departments/sections and outside vendors.
  • Communicating across multi-disciplined teams to include electrical contractors, customers, FirstEnergy regional switchmen/technicians, transmission operations, design engineering, planning/protection and project management to ensure successful and timely project completion.
  • Assisting in performing Apparent Cause and Root Cause analyses, including formally documenting findings through the preparation of technical reports and presentations.
  • Assisting in the education of others on technical subject matters and in the improvement of technical programs and process effectiveness.
  • Maintaining a safe workplace for coworkers and the community based upon a developing knowledge of potential hazards, industry regulations/requirements and company practices.
  • Supporting the development of corporate programs and policies; assist others tasked with leading organizational change.
  • Assisting senior technical staff in developing solutions to complex technical assignments.
  • Supporting FE Utilities Operations and Maintenance staffs in reaching goals and meeting deadlines.
  • Producing results that have a direct, positive impact on the Company.
  • Consistently anticipating customer needs and deliver high quality results.
  • Willingness to travel throughout the FirstEnergy system including occasional overnight stays when necessary.

An employee hired at the IV level will be expected to perform all of the above responsibilities with more proficiency, and in a more independent manner. Further, the Engineer IV level employee will be assigned additional responsibilities related to those listed above.

Qualifications at the Engineer II Level include:

  • Bachelor of Science degree in Electrical, or Mechanical Engineering ( BSSE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer’s (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor’s degree in Electrical, or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, or Mechanical Engineering from a university with an ABET accredited Bachelor’s program. Engineering is preferred.
  • A Fundamentals of Engineering (FE) Certificate is preferred.
  • Minimum of 2 (two) years of Engineering experience is required.
  • A working knowledge of electrical engineering, transmission substation equipment, transmission system protection and transmission system operations are desired.
  • Strong consideration will be given to those with previous experience in the design, maintenance or testing of substation equipment. Also, familiarity with the understanding, application, and communication of microprocessor based protection and control equipment is a plus.

Qualifications at the Engineer Ill level include:

  • Bachelor of Science degree in Electrical, or Mechanical Engineering (BSSE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer’s (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor’s degree in Electrical, or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, Mechanical Engineering from a university with an ABET accredited Bachelor’s program. Engineering is preferred.
  • A Fundamentals of Engineering (FE) Certificate is preferred.
  • Minimum of 3 (three) years of Engineering experience is required.
  • Strong consideration will be given to those with previous experience in the design, maintenance or testing of substation equipment. Also, familiarity with the understanding, application, and communication of microprocessor based protection and control equipment is a plus.
  • Experience with SEL products and software, Enoserve RTS and Doble testing
  • Superior written and verbal communication skills
  • Commitment to FirstEnergy's Safety Policies and the Accident Prevention Handbook
  • Understanding of FirstEnergy's Manual of Operations
  • Ability to participate in afterhours (e.g. evening, weekend and holidays) callouts to provide onsite technical and operational guidance in support of system emergencies
  • Ability to lead by example
  • Must be able to manage and prioritize multiple projects simultaneously and be able to work effectively under the pressure of deadlines, unexpected developments, changes in project scope, budget constraints, unforeseen field problems and demands on time for work assignments outside of the normal duties.
  • Demonstrate a questioning attitude to continue to learn, produce results, and strengthen existing relationships
  • Strong mechanical aptitude
  • A willingness to train and mentor technicians and other members of the technical engineering staff
  • Developed analytical and technical abilities
  • Ability to develop effective working relationships with employees at all levels of FirstEnergy Corp
  • Must be capable of driving projects and tasks to completion by working in the field with the regional substation physical work force
  • Deliver quality, accurate work within established deadlines
  • Valid driver's license and reliable transportation
  • Must live within a 45-minute commute of assigned work location

Qualifications at the Engineer IV level include all of the above plus:

  • Bachelor of Science degree in Electrical, or Mechanical Engineering ( BSSE, BSME) from an ABET accredited institution is required. Acceptable alternatives are: (1) a Professional Engineer’s (PE) License (2) a Bachelor of Science degree in Engineering Technology from an ABET accredited institution (3) a Bachelor’s degree in Electrical, or Mechanical Engineering or technical field of study (non-ABET) plus an advanced degree in Electrical, or Mechanical Engineering from a university with an ABET accredited Bachelor’s program. Engineering is preferred.
  • A Fundamentals of Engineering (FE) Certificate is preferred.
  • Minimum of 5 (five) years of Engineering experience is required with a BS in Engineering or minimum of 7 (seven) years of Engineering experience is required with a BS in Engineering Technology.

All employees must have an account to use a FirstEnergy computer to apply for jobs. If you do not know if you have an account, please contact the IT Service Desk at 330-315-4357, Option 1 - 1 for assistance.

FirstEnergy Human Resources Team

Something wrong with this job? Report it · This flag looks wrong

Similar jobs

Power Quality Engineer

FirstEnergy · Akron, OH +3 places

On-site

StrongPay not listedChecked open todayPosted 1 month ago

Power Grid Engineer

LLNL · Livermore, CA

$122k–$186k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

Microwave/RF Engineer

LLNL · Livermore, CA

$146k–$223k/yrFull-timeHybrid

StrongChecked open todayPosted 2 days ago

See more like this