Electrical Engineer jobs

Avionics Engineer - Power

Karman+Broomfield, COFull-timeNo US visa sponsorshipPosted 1 month ago

$150k–$200k/yr listed by the employer

Above the typical $145k a year for Electrical Engineer jobs in Colorado (all levels)How we compare

How we compare. Typical is the median yearly pay of 153 Electrical Engineer jobs in Colorado (all levels) that list pay, from the employers' own postings. About means within 5%.

Strong: looks real and checked open today.

On Karman+’s own careers site (Workable).

  • Checked: On the company's own careers siteWorkable board
  • Checked: Checked open todayWorkable board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundWorkable board
  • Trust score 100 / 100 · Strong
See all 5 checksShow fewer
How we check

What you’ll do

  • Own the spacecraft power architecture and budget across the solar array, buses, battery, conversion, and distribution.
  • Design the array-to-bus interface and set bus specifications for propulsion and other loads.
  • Lead PCDU and power-electronics development, including switching, protection, telemetry, and fault recovery.
  • Build a power flatsat with array and propulsion load simulators, then carry the subsystem through integration, EMC, and environmental qualification.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • Delivered a spacecraft power subsystem, or a major part of one, through test, including hands-on power-electronics design
  • Experience with high-voltage spacecraft buses or high-power electric-propulsion interfaces
  • Experience owning requirements, design, suppliers, test, and documentation
  • GEO electric orbit-raising background (preferred)
  • PCDU/EPS board design for flight (preferred)
  • EMC test experience (preferred)

Skills

  • Strong fundamentals in DC power conversion, control-loop and bus-stability analysis, battery systems, and solar-array electrical behaviour across temperature and radiation
  • Working knowledge of radiation effects and derating practice for power parts
  • MPPT/direct-drive array architecture (preferred)
  • Familiarity with F Prime or similar flight software frameworks for telemetry and fault protection (preferred)

Other requirements

  • Comfort working on a small team and making decisions
  • US work authorization

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Benefits

Health insurance
Medical plans
Dental & vision
Dental and vision plans
Retirement plan
401(k) Retirement Plan
Equity
Equity Incentive Plan
Life & disability insurance
Life insurance and short-term and long-term disability insurance

Full job description

From Karman+’s careers site

Karman+ is building the first logistics chain in space for the regolith age. Today everything we use in orbit — fuel, water, materials — is launched from Earth, which keeps every mission slow, expensive and small. Asteroids already hold those resources in orbit. We build the spacecraft and systems to go get them.

Our first mission launches in 2028 to rendezvous with the asteroid Apophis — a deep-space mission designed, built and tested by our team in Broomfield, Colorado, on a startup timeline and budget. We develop most of our own hardware, from power and propulsion electronics to RF systems and payloads, and we test it in our own facilities.

The role

Show full descriptionShow less

You will own the spacecraft’s electrical backbone: an ~8 kW solar array feeding a high-voltage bus that drives electric propulsion, a low-voltage bus that runs everything else, and the power conditioning, battery management and distribution hardware in between. Most of it is designed here. You’ll be responsible for making it work as a system — from the array’s peak-power tracking through the HV bus to the PPU, down through the HV-to-LV conversion to the 28 V loads.

Requirements

Day to day you will

  • Own the power architecture and budget end to end: array, peak-power tracking, HV bus, battery and charge/discharge regulation, HV–LV conversion, and distribution — and keep the budgets closed as the spacecraft evolves.
  • Design the array-to-bus interface: MPPT strategy, string configuration, and the behaviour of an unregulated HV bus feeding a 5 kW electric-propulsion load as the array degrades through the Van Allen belts and the vehicle flies power-limited.
  • Set and defend the bus specification against the loads: PPU input range, inrush and ripple at thruster ignition, bus stability at the PCDU–PPU interface, and the cold-eclipse-exit overvoltage case that sets the HV design point.
  • Lead the PCDU and power electronics development with the avionics team across board-level design, power switching and protection, telemetry, and the fault-protection behaviour that lets the vehicle recover on its own at 150 million kilometres.
  • Build the power flatsat with an array simulator and a propulsion load simulator, and carry the subsystem through integration, EMC and environmental qualification in our own facilities.

You'll fit if you have

  • Delivered a spacecraft power subsystem, or a major part of one, through test — including hands-on power-electronics design, not only architecture.
  • Strong fundamentals in DC power conversion, control-loop and bus-stability analysis, battery systems and solar-array electrical behaviour across temperature and radiation.
  • Experience with high-voltage spacecraft buses or high-power EP interfaces; GEO electric orbit-raising background is directly relevant.
  • Working knowledge of radiation effects and derating practice for power parts.
  • The habit of owning the whole thing: requirements, design, suppliers, test and documentation.
  • Comfort with a small team where you’ll make the calls.d hand to a committee.

Nice to have

  • MPPT/direct-drive array architecture
  • PCDU/EPS board design for flight
  • EMC test experience
  • Familiarity with F Prime or similar flight software frameworks for telemetry and fault protection

Required

  • US work authorization

Benefits

Salary Range: $150k-200k annually

Benefits:

  • Medical plans
  • Dental & Vision plans
  • Life insurance
  • Short-term and Long-term Disability Insurance
  • 401(k) Retirement Plan
  • Equity Incentive Plan

Something wrong with this job? Report it

Similar jobs nearby

Power System Engineer

WSP · Houston, TX +6 places

$90k–$157k/yrHybrid

StrongChecked open todayPosted 19 days ago

FPGA Engineer

Tomorrow.io · Golden, CO

$140k–$160k/yrOn-site

StrongChecked open todayPosted 15 days ago

RF Engineer

Anduril · Broomfield, CO +1 place

$127k–$170k/yr

StrongChecked open todayPosted 21 days ago

Embedded Engineer

Xcimer Energy · Denver, CO

$125k–$150k/yrFull-timeOn-site

StrongChecked open todayPosted 26 days ago

See more like this