Electrical Engineer jobs

RF Design Engineer

TrellisWare TechnologiesSan Diego, CA

$115k–$200k/yr listed by the employer

Below the typical $180k a year for senior Electrical Engineer jobs in CaliforniaHow we compare

How we compare. Typical is the median yearly pay of 513 senior Electrical Engineer jobs in California that list pay, from the employers' own postings. About means within 5%.

Key facts

Experience
7+ years
Degree
Bachelor's degree
Clearance
Security clearance required

Looks real. 1 thing to check before you apply.

On TrellisWare Technologies’ own careers site (Greenhouse), checked open today.

  • To check: Posted by the employer 12 months agoLong-open jobs are sometimes already filled. Ask when they plan to hire.
  • Checked: On the company's own careers siteGreenhouse board
  • Checked: Checked open todayGreenhouse board
  • Checked: Pay listedJob posting
  • Checked: No reposts foundGreenhouse board
  • Trust score 75 / 100 · Looks good
See all 6 checksShow fewer
How we check

What you’ll do

  • Design and develop receive chains and 2–20 watt transmit chains for VHF, UHF, L, and S-band radios.
  • Perform system-level RF design, component selection, cascade analysis, and custom filter and amplifier design.
  • Create RF schematics and PCB layouts, and generate design documentation.
  • Test, validate, and debug performance at component, module, and system levels.

Summarised from the posting by AI and can be wrong. The full description is the source.

Requirements

Experience

  • 5 years of experience with an MSEE or 7 years with a BSEE as an RF/Wireless Design Engineer
  • Hands-on experience with RF circuit bring-up, troubleshooting, optimization, and high-volume production
  • Discrete amplifier design, particularly at 1 W and above (preferred)
  • Experience with EM solvers such as HFSS, Momentum, Analyst, or AXIEM (preferred)

Education

  • Bachelor’s degree in electrical engineering or a related field

Skills

  • RF cascade analysis and optimization for noise figure and performance in strong interference environments
  • Filter synthesis and design, especially low-loss, high-power filters using lumped elements
  • Schematic entry and PCB layout experience
  • Linear RF simulation
  • Altium tools for schematic entry and PCB layout (preferred)
  • AWR Microwave Office for linear RF simulation (preferred)
  • Understanding of the features and limitations of integrated RF transceivers (preferred)
  • Non-linear simulations, including simulated load-pull analysis (preferred)
  • Frequency conversion, frequency synthesizers, and PLL design up to 3 GHz with tight packaging constraints (preferred)
  • Proficiency with PC office applications (preferred)

On the job

  • Able to lift and/or move up to 50 pounds occasionally

Other requirements

  • U.S. citizenship or permanent residency

Your match

Sign in and add your resume to see which of this job's requirements it shows.

Sign in to check your match

Saved to your account, encrypted. The AI that reads it doesn't keep it or train on it.

Full job description

From TrellisWare Technologies’ careers site

TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions.

Show full descriptionShow less

At TrellisWare, we connect passion with purpose and together we make an impact- on our careers, our company, and the world. And you can too. If you love to innovate and collaborate in a dynamic environment where boundaries are being pushed, you belong at TrellisWare. Where the opportunity to serve is not a challenge but a gift. Where you’re never going alone. Because there’s too much at stake to go solo.

Our Hardware Team is seeking an RF Design Engineer. You would be responsible for designing and developing highly selective receive chains and 2-20 watt transmit chains for VHF, UHF, L, and S-band handheld and vehicular radios. TrellisWare’s products are engineered to provide robust and reliable communication in congested and contested RF environments. TrellisWare is looking for RF engineers who can combine the latest integrated components alongside custom-designed discrete filters and amplifiers, balancing transmit power, battery life, spurs and harmonics, receive selectivity, noise figure, and overall size to produce cutting-edge radios.

The essential duties and responsibilities include:

  • System-level RF design, including component selection and cascade analysis, using AWR Microwave Office
  • Component level design, leveraging integrated solutions but primarily focused on custom discrete filters and amplifiers
  • RF schematic entry (and ideally PCB layout) using Altium toolchain
  • Generate required design documentation.
  • Validate and debug product performance through test and analysis at the component, module and system level.
  • Collaborate with Product Management and Operations to carry development from prototype to production.
  • Perform other duties as assigned.

Education and work experience requirements are:

  • Minimum Bachelor’s degree in electrical engineering or related field of study required.
  • 5 years of experience with MSEE or 7 years of experience with BSEE as a RF/Wireless Design Engineer.

To be considered for this position, you would need to meet, at a minimum, the knowledge, skills, and abilities listed here:

  • RF cascade analysis and optimization for both noise figure and performance in strong interference environments
  • Filter synthesis and design, especially for low-loss, high power filters using lumped elements
  • Schematic entry and PCB layout experience (ideally using Altium tools)
  • Linear RF simulation (ideally using AWR Microwave Office)
  • Hands-on experience with RF circuit bring-up, troubleshooting, optimization, and high-volume production

An exceptional candidate would also possess the following knowledge, skills, and abilities:

  • Discrete amplifier design experience, particularly at 1 W and above
  • Understanding of both the features and limitations of integrated RF transceivers
  • Experience with non-linear simulations, including simulated load-pull analysis
  • Understanding of frequency conversion, frequency synthesizers, and PLL design up to 3 GHz with tight packaging constraints.
  • Experience with EM Solvers such as HFSS, Momentum, Analyst or AXIEM (preferred).
  • Work independently, demonstrate initiative and interact with a variety of engineering development teams.
  • Demonstrate strong documentation skills and proficiency with PC office applications.
  • Demonstrate analytical and problem-solving skills.
  • Demonstrate strong written and verbal communication skills.
  • Strong collaborative drive and interpersonal skills.
  • Strong initiative, proactive work ethic and prioritization skills.
  • Sound judgement and analytical problem-solving skills.
  • Effective execution and decision making.
  • Champion of change and promotes innovation.
  • Strong written and verbal communication skills.
  • Able to frequently sit, stand, walk, use hands to fingers, handle or feel, reach within hands and arm's length, stoop, kneel, and crouch, talk and hear.
  • Regularly required to sit for extended periods of time; frequently required to use office equipment such as PC, printer, telephone, etc.
  • Able to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds.
  • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

Additional requirements are:

  • U.S. Citizenship or Permanent Residency

Note: Many of TrellisWare's positions require a security clearance or the ability to obtain one. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

TrellisWare Technologies pays competitively according to the market in an individual's geographic location, in addition to their qualifications and experience. The posted range is annually and for individuals located in the San Diego, CA area.

San Diego, California Pay Range

$115,000—$200,000 USD

Disclaimers

  • The above statements are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in the job description restricts the company's right to change, assign, or reassign duties and responsibilities at any time for any reason.

-

Our compensation approach is designed to be competitive and equitable across the markets in which we operate. Compensation is benchmarked against local market conditions and considers the role, geographic location, relevant experience, skills, and qualifications.

  • As part of our onboarding process, we conduct background checks, where legally permitted and appropriate for the role, in accordance with applicable laws, regulations, and privacy requirements.

Check out the Careers page for more information about working at TrellisWare Technologies.

The physical demands described here represent those that must be met in order to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable those with qualified disabilities.

  • By submitting your application, you acknowledge that TrellisWare Technologies may collect, process, use and obtain your personal information for recruiting and hiring purposes in accordance with applicable data protection and privacy laws. Please review our Employee-Applicant Privacy Notice for more information.

*TrellisWare Technologies, Inc. is an EEO/AA/Disability/Vets Employer.*

Something wrong with this job? Report it · This flag looks wrong

Similar jobs nearby

Senior RF Design Engineer

Silvus Technologies · Los Angeles, CA +1 place

$140k–$190k/yrOn-site

StrongChecked open todayPosted 1 month ago

RF Engineer

Voyager Technologies, Inc. · San Diego, CA

$125k–$195k/yrOn-site

StrongChecked open todayPosted 11 days ago

RF Test Engineer

Silvus Technologies · san diego, CA +1 place

$100k–$140k/yrOn-site

StrongChecked open todayPosted 1 month ago

See more like this